Resume - Over 14 years of professional experience of Design, Draughting and Checking of...

Misco Jobs

Resume #7745

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Passed 2 yrs. Diploma in Draftsmanship (Mech.) in 1988-90 from Dahod-Gujarat-India
------------

OBJECTIVE:
------------
Ambitious, organized Piping Designer looking for a Change, where I can be a key team member, making an important contribution to the Piping Dept. and strategy of a growing & any prestigious well established Company.
------------

WORK EXPERIENCE:
------------
MAIN WORK EXPERIENCES & PROJECTS:

Company - Abu Dhabi Polymers Co. Ltd., (Borouge)
ADNOC GROUP OF COMPANY – Abu Dhabi - UAE Position: Mechanical & Piping Designer
Working as Direct Hired

Projects - Working for Plant Modification of Two Different Unit Ethylene plant & Poly-Ethylene Plant-I & II Including the Preparation of Mechanical drawings.
Responsibility - Preparation of As built for PDS 2D Schematic P & ID drawings, PDS 3D Model updating in Piping Designer for any Plant modification project, As built Isometrics extraction from Isogen, Making As built G.A. drawings with the help of PDS Drawing Manager. Checking of Piping Isometrics & Mechanical Drawings in Microstation for new lines of the Ethylene & Poly Ethylene Unit-I & II of the Plant & as well as handling whole plant modification jobs

Company - Fluor Daniel India Pvt. Ltd., Position: Designer-III (Piping)

Projects: Long Lake Upgrader Project, Fort Mcmurray, Alberta Opti Canada Inc. Canada

Responsibility - PREPARATION OF PDS 2D SCHEMATIC P & ID DRAWINGS.
Worked as a Designer (Piping) of work share project with FluorDaniel Canada. Responsible for to making PDS 2D Schematic P&ID's & Solving all warnings, Errors & run Propagation for their Long Lake Upgrader Project of FORT MCMURRAY, ALBERTA

Company - Fluor Daniel India Pvt. Ltd., Position: Designer-III (Piping)

Projects: Athabasca Oil Sands Downstream Project-Canada Shell Canada Ltd. - Canada
Responsibility - PREPARATION OF PDS 2D SCHEMATIC P & ID DRAWINGS.
Worked as a Designer (Piping) of work share project with FluorDaniel Canada. Responsible for to making PDS 2D Schematic P&ID's & Solving all warnings, Errors & run Propagation for their Athabasca Oil Sands Downstream Project-Canada

Company: Fluor Daniel India Pvt. Ltd., Position: Designer-III (Piping)

Projects - SCANfiner UNIT - Strathcona, ESSO (IMPERIAL OIL LIMITED) - Canada

Responsibility - DETAIL ENGINEERING AND PREPARATION OF 3D MODELS
Worked as a Designer (Piping) for work share project with FluorDaniel Canada.
Responsible for to Developed 3D Equipment modeling, Piping modeling, Pipe support, Iso. Extraction by using PDS (Intergraph) & Misrostation for Product Stripper design area, Main Reactor area & involvement in Diolefin saturator exchanger design area. Also involves in squad checking of vendor & inter discipline drawing & nozzle orientation etc.

Company - TECNIMONT ICB Ltd., Position: Designer (Piping)

Projects: Urea deb. & granulation Plant-II, PETROCHEMICAL Ind. Co., (PIC) Kuwait

Responsibility - Responsible for the Detail Engineering and 3D - Modeling of GRANULATION - II project at our TICB - Mumbai office, In this project. I was responsible for Detail Engineering and making study drawing with the help of Microstation-SE. I was involved in 3D modeling of NH3 unit with the help of PDS (Plant Design System Software), which includes Equipment Modeling, Piping Modeling, Isometric extraction and drawing manager activities.

Projects: Urea deb. & Granulation Plant-I, PETROCHEMICAL ind. co,(PIC), Kuwait

Responsibility Responsible for the Detail Engineering and 3D - Modeling of Urea Plant project. And making 2D drawing with the help of Microstation, involved in 3D modeling with help of PDS (Plant Design Software) which includes Equipment Modeling, Piping Designer, Isometric extraction and drawing manager activities.
I Was deputed 6 months at PIC- KUWAIT SITE.
Responsible for Existing Piping relieving activities, Checking of support, Preparation & checking of reused lines, Isometric, Checking & updating of P&I diagram as per reused pipe lines, Preparation of Pipe track layout drawings with the help of Microstation-SE.

Projects: FINA CHEMICALS, FELUY. – BELGIUM (Polypropylene Plant.)

Responsibility Responsible for preparation of PDS 2D P&ID'S.
I Was involved for to making PDS 2D Schematic P&ID's & Solving all warnings, Errors & run Propagation for their making P&ID'S in PDS 2D of Polypropylene Plant.

Projects: ANTIBIOTICOS – SETTIMO TORINESE – ITALY (Pharmaceutical Plant.)

Responsibility - I Was deputed 3 months at " Antibioticos – Settimo Torinese – ITALY "
Responsible for Detail Engineering Activities & preparation of Making 2D drawings G.A., Isometrics, Nozzle orientation & Special Support sketches with help of AutoCAD.

Projects: LLDPE PLANT, HALDIA – INDIA

Responsibility - Responsible for detail engineering activity & site supervision & Deputed to TICB-Mumbai for Preparation of isometrics on PIPECAD & Checking of Isometrics & Deputed to DHDS–Haldia Site for Site supervision.

Projects: 800 MW Co-Gen. Power Plant, SEMBCORP COGEN, Singapore by GE-Alstom

Responsibility - Responsible for preparation of 3d models & involved in PDS 3D - Modeling of 800 MW Co-Gen. Power Plant project. for Equipment Modeling, Piping Modeling, Isometric extraction and drawing manager activities.

Projects: POLYPROPYLENE PLANT, IPIRANGA PETROQUIMICA, TRIUNFO BRAZIL

Responsibility - I Was involved in PROJECT OF PP PLANT, IPIRANGA (BRAZIL) as Designer for
Detail Engineering of a Polymerization Area. This task included Preparation of
Distribution P & Ids for Process and Utilities service Fluids for Pipe Rack
Modification in Equipment Layout & Demarcation of Areas. Preparation of Piping Layout Drawing, Nozzle Orientation, Bill of Material, Secondary structural drg., Checking of Isometrics Drawings, Civil Structure Drawing with Equipment Layout, Equipment Data sheet and Equipment's Vendor Drawing.

Company: TECNIMONT ICB Ltd., Position: Draughtsman (Piping)

Projects - PTA – REVAMP – OTTANA – ITALY (CHEMICAL PLANT)

Responsibility Responsible for detail engineering and preparation of 3D MODELS, Equipment layout, Piping Layout drawings, Developed 3D MODEL on OMNI PIPE, Automatic Extraction of Isometrics & B.O.Q from 3D–MODEL, Support Marking & Preparation of special Support sketches, Isometrics & B.O.Q. for TIE-IN points.

Projects: Indian Petrochemical Corporation Limited, 75000 TPA Polypropylene Plant – Vadodara.

Responsibility Revised Equipment layout, piping Layout drawings, Preparation of Isometrics & BOQ., Support Marking & preparation of special support sketches.

Projects: MADRAS FERTILIZERS LIMITED. – MADRAS – (INDIA)

Responsibility - Revised piping Layout drawings, Isometrics & BOQ, Special support sketches.

Company: Raunaq International. Ltd. - Nehru Place – New Delhi
Position: Draughts man

Projects: MARUTI UDYOG LTD. (EXPANSION PROJECT) – GURGAON (INDIA)

Responsibility Revised Equipment layout, Revised piping Layout drawings, Preparation of Isometrics & BOQ., Preparation of As built drawings, Site Supervision at site.

Company: Singh Springs Pvt. Ltd. - Palej (Guj)
Position: TECHNICAL SUPERVISOR
Responsibility Preparation of Mechanical drawings & Technical Supervision.

FOREIGN ASSIGNMENT:
I Was deputed 3 months at Antibioticos – Settimo Torinese – ITALY
I was involved in Detail Engineering Activities like making 2D drawings, Isometrics, Nozzle orientation & Special Support sketches with help of AutoCAD Ver-14. I was deputed at TECNIMONT S.p.A., MILAN, ITALY for detail engineering, material take off and 3d modeling for Urea Revamp. & Gran. plant of PIC- Kuwait Project.

I Was deputed 5 months at PIC- KUWAIT SITE.
I was responsible for Existing Piping relieving activities, Checking of support, Preparation & checking of reused lines, Isometric, Checking & updating of P&I diagram as per reused pipe lines, Preparation of Pipe track layout drawings with the help of Microstation ver-SE.
------------

EDUCATION & CERTIFICATION:
------------
Passed New SSC Exam. with Science in 1985. from G.S.E.B- Gandhinager Board, Gujarat & Passed 2 yrs. Diploma in Draftsmanship (Mech.) in 1988-90 from Dahod-Gujarat-India
------------

ADDITIONAL INFORMATION:
------------
SOFTWARE EXPERIENCE
Microstation's all version up to SE & J or 7.01, AutoCAD, R-14, R-2000, R-200i & R-2002, Intergraph's Plant Design system (PDS), PDS 2D SCHEMATICS ( P&ID ), PDS 3D MODELING, EQUIPMENT MODELING, PIPING DESIGNER, DRAWING MANAGER, ISOGEN, SMART PLANT REVIEW (SPR), Rebis's Omni 3D Modeling series (With Bentley System's Inc.) – U.S.A OMNI PIPING MODELLING, OMNI EQUIPMENT MODELING, OMNI ISOMETRIC, OMNI AUTO ISO. FOR AUTOMATIC EXTRATION OF ISOMETRICS. Rtd's Pipecad 5.2 for Isometric GRAPHIC APPLICATION OF PIPECAD, Rebis's Auto plant 3D Modeling series (With Rebis's California - USA) AUTO PLANT PIPING MODELLING, AUTO PLANT EQUIPMENT MODELING, AUTO PLANT ISOMETRIC, AUTO PLANT AUTO ISO. FOR AUTOMATIC EXTRATION OF ISOMETRICS, AUTO PLANT SPECGEN.

Worked on the following modules of PDS-3D system Ver.-07.00.00.15
PDS Equipment Modeling, PDS Piping Designer, PDS Isogen, PDS Drawing Manager and PDS Design Review.
(Expert in PDS)
I can operate AutoCAD version from release 14 to Release 2002 & All the version of Microstation from Ver.- 4.0, 5.0, 95, SE & J or 7.01.

KNOWLEDGE OF OPERATING SYSTEM - DOS, WINDOWS NT, WINDOWS 2000

KNOWLEDGE OF OFFICE AUTOMATION PACKAGES - Office-97 (Word, Excel, Power Point), Lotus Notes, PMCD & other windows based software.
Familiar with Document Control software Documentum for Electronic Data Management System (EDMS).
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3651 to 3700 of 4798)

Go to Search Parameters...

Brief Description

Purchasing/Logistics/Supply Chain Expert for more than 12 years of solid experience

1991-2002 : Diploma in Building Services Engineering Place : Shah Alam Polytechnic CGPA : 2.85 out of 4.00 1997-1998 : SPM Place : Sekolah Menengah Teknik, Kuala Terengganu Grade : Grade 2, 31 Aggregate

Customer service, clerical, dental, medical

Hull / fields/site engr. structural detailer have an experience in shipyard industries.

Strategic Planning • Program Management • Budget Analysis • Client/Employee Relations • Estimating

After having the highest level of exposure in Project Planning for the past Eight years in one of the fastest growing companies in Dubai. I am looking for a challenging and creative position that will set new standards in Project Planning. And to obtain a challenging position.

Over 20 years of diversified management experience with an extensive background in the management, selection and maintenance of vehicle fleets, over the road and off road construction machinery.

BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.

Having 4 year exp. in automotive sector.

Communicator, negotiator, manager, natural leader

20+ years in culinary field,client pleaser,professional with a sense of humor

IT PROJECT MANAGEMENT

Well versed with ISO-9001:2000, ISO/TS-16949:2002 QMS, MS-OFFICE

Total 11 years of experience for Instrumentation and control related design and detail engineering activities for Petrochemical refineries, Ammonia Fertilizers, Cross country Pipelines, Offshore and onshore gas processing facilities and power projects.

Information and Communication Technology Support and management - LAN/WAN Management, Email systems management,server administrations , systems administration, Database Backups,Network Security etc

Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.

Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar

Safety/Env (HSE) post sought (Will also accept Quality related positions) Reliable/Flexible/Language proficient - Willing to work worldwide, available from June 2009

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Registered Architect (License No. 19900) since February 2005 issued by Professional Regulation Commission (PRC) of the Republic of the Philippines. Proficient in AutoCAD Program & MicroStation software. Familiar in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.

Ingénieur en CVAC/ Mécanique du bâtiment et énergie

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

Logistics Manager, Rig Manager, Materials Manager

Bachelors - B.A., Applied Mechanical Engineering

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

willing to work in a challenging Electrical carrier

Working on projects for various E&P Companies and Contractors

Project Controls, Cost Engineering, Procurement

A Credit Analyst and an Administrative Officer for more than 2 years, experienced in Accounts Receivable Management and other Administrative works.

To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;

Safety Manager/Auditor with Fire/Security and Enviromental experiance

Qualifications- NEBOSH Certification, OSHA-510 Certification and OSHA-500 Trainer Certification. Skills- HSE Mgt System, QA/QC Mgt System, Contractor HSE Mgt, Project Mgt, Personnel HSE Training, Regulatory Compliance Mgt, Resource Management, Sustainable Development & Conflict Resolution.

Chemical Engineer working on Process & Projects Engineering with 5 years of experience

Totally, more than 18 .6 years of experience in Diversified Fields, of which 15 years in Retail Trade in a Service-Related industry & 3.6 years in Wholesale Trade.

VBA Programmer for Microsoft Access and Excel

Mechanical Engineering Technologist

I am proficient in Timberline, Gradebeam, Suretrak, Primavera, Prolog, Viewpoint, Microsoft Office, Word, Excel, Works, Quattro Pro, Outlook, OneNote, and PowerPoint. I have also completed my 30 hour OSHA course and LEED AP certification.

Provide Project Control Scheduling Support

Project Recruitment Specialist

Over 14 years of professional experience of Design, Draughting and Checking of Plant layout and Piping System.Conceptual & detail engineering like Preparation of Plot Plan, Equipment Layout, Piping Layout, Piping Isometrics, Nozzle Orientation & Bill Of Materials preparation.

LANGUAGES Basics of C & C++, OPERATING SYSTEMS MS-Office, Windows 2000, XP. APPLICATIONS MS-OFFICE

Electrical instrument enginer, Prject engineer, maintenance, Loop checking, testing, operation, elctromechanical, F&G, ELV, MV ...etc

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto cad Software

Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.

SALES , MARKETING AND PROPOSALS ENGINEER.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 [ 74 ] 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out