Resume - heavy equipment mechanic

Misco Jobs

Resume #77657

CONTACT INFORMATION:
View contact information...

Position Applied: Heavy and Light Mechanic or Bus Driver

Personal Information:

Date of Birth: October 27, 1950
Birth Place: Bantayan Cebu
Age: 57 yrs. old
Sex: Male
Weight: 150 lbs.
Height: 5'5
Nationality: Filipino
Civil Status: Widower
Religion: Catholic
Language Spoken: English, Tagalog & Visaya
Passport No.: MM 859340
Date Issued: April 19, 2004

Educational Information:

Santa Clara Elementary School June 1958 – March 1964

Ipil Marian Academy June 1964 – March 1968

Training Attended:

Student Privilege Apprentice Hercules Lumber Company 1970 - 1974

Employment Information:

Maluto Transportation & Travel Corporation
# 19 Interior Aria Street, Sta. Cecilia Village, Talon II,
Las Piñas City; Metro Manila Philippines. (Tel No. 872-7379)
Bus Driver
August 26, 2005 - June 15, 2008

My Major Duties and Responsibilities as Bus Driver and My Job Description were:
1. As a bus driver, I maintain the good condition of passenger's bus.
2. Before I start the engine, I check oil, water, brake fluid, tires, fan belt and all signal lights.
3. I also bring some tools for emergency purpose:
 Flat & Philip screw driver adjustable whence.
 Mechanical flier.
 Electrical flier.
4. And especially the safety and security of a passengers.

Qatar International Company
Middle East
Mechanic
January 2004 – March 2004
Military Maintenance

For Being a Military Maintenance, I fixed these kinds of Military Equipment & Services for the following:

1. trouble shooting, repair under chassis & brake system:
 Actross Mercedes Bens Trailer
 American Car
 pick –up (gmc)
 van (gmc)
 Dump truck Mercedes bens
 Fire truck
 Isuzu pick-up

Erjhon & Almark Transportation Corporation
# 23 Villa Cristina Subd, Pamplona, Las Piñas City. (Tel No. 874-3689)
Bus Driver
July 1999 – December 2003

My job description for this company I am the one who assign to train for new applicant bus driver.
 Being a driver, I maintain the good condition of passenger's bus.
 Before I start the engine, I check oil, water, brake fluid, tire, fan belt and all signal lights.
 I also bring some tools for emergency like flat & Phillip screwdriver adjustable whence.
 And especially the safety and security of a passengers.

Business Service Mechanic Contractor
# 42 Saint John Street Perpetual Village Pulanglupa,
Las Piñas City
February 5 1998 – May 14, 1998
Mechanic Contractor

I repair brake, trouble shooting and overhauling engine.
 Isuzu 4BAI engine
 Isuzu Elf
 Toyota Car
 Change Clutch-lining pick-up Mazda.
And a line brake system.

Bilfinger & Berger Tunneling
Taipei, Taiwan (Republic of –MPT Chung Ho Line (Tel No. 874-3689)
Mechanic
March 1997 – December 1997

Trouble Shooting & Under chassis repairs for Different kinds of Engine and Company Equipments:

1. Locomotive train
2. Hydraulic electric power pack
3. Caterpillar Compressor
4. Isuzu Dump Truck
5. FUSO Cargo Truck
6. Nissan Cargo Truck
7. Nissan Pick – up
8. Generator Caterpillar
9. Loader Model 988
10. Detroit engine
11. Water Pump
12. Electric Hydraulic Pump
13. Electric Hydraulic Cement Pump

Bus Operator & Manager
# 42 Saint John Street Perpetual Village Pulanglupa Las Piñas City
Bus Operator & Manager
January 1990 – February 1996

 As a bus operator I manage my people like my drivers, conductors and I'll make sure that I gave the right instruction.
 And I also do the proper maintenance of my buses, and I follow the policy of ( Land
Transportation & Federal Regulatory Board/LTFRB).

Braspetro Oil Services Company
Greatman Made River (Libya)
Mechanic
October 01, 1989-October 07, 1990

Every morning I read the job order. In addition, I prepared same spear parts to bring the filled then I do service in reg water drilling machine. And after finish, my assignment I will make a job order to gave to my supervisor, and go back to motor shop and get another job.

 Repair under chassis
 Trouble shooting
 Change oil
 Hydraulic oil
 Replace diesel
Put gracing all petting's

American Military Clark Air Base Philippines
Pampanga (Dao)
Mechanic
January 1987 – April 1987

I repair a military armor truck, trouble shooting.
After I finish my work I do, road test the equipment and I will make it, sure no back job of my work then I endorse the equipment to my American military supervisor.

 Hydraulic boom track GMC
 International trailer truck
 Pick-up GMC
 International cargo truck
 Military armor truck

Demauro Shuwayer
Kingdom of Saudi Arabia (Earth Moving & Military Runway)
Heavy Equipment Mechanic
October 06, 1979-October 16, 1986

 Repair, trouble shooting and overhauling of different kinds of engine and company equipments.
 Mercedes benz water tanker, Dump track & trailer
 Holland loader
 Caterpillar roller
 GMC Bus
 International bus
 American car GMC
 Electric hydraulic cement pump
 Backhoe caterpillar
 Wheel loader 988 caterpillar
 American crane
 Caterpillar 16 G grader
 Euclid Dump Track
 Cadillac & Buick American car

Sta. Fe Shuwayer Corporation
Arabian Industrial & Petroleum, Facilities Construction Corporation
Field Mechanic
July 5, 1978-July 10, 1979

I assigned in a job site and I do perfect decision. In addition, repairs & trouble shooting for Different kinds of engine and Company Equipments. After finish, my job I make a job order and I gave to my supervisor.

1. International bus
2. Pick-up
3. GMC bus
4. Grader model 16G
5. Loader 988
6. Ruller Cummins engine
7. Backhoe caterpillar
8. Wilding machine
9. American crane
10. Bomb truck
11. D9 bulldozer caterpillar

Siari Timber Company
Sindangan Zamboangga Del Norte
Mechanic
1975 – 1977

Preventive Maintenance
 Trouble shooting
 Repair and overhauling engine
 V-8 Ford cargo truck
 Mac track(Isuzu truck)
 Cummins generator
 Ford pick – up
 Isuzu dump truck
 FUSO cargo truck

I repair brake system.

Training Information:

Student Privilege Apprentice Hercules Lumber Company 1970 – 1974

Executive Technical Consultants July 2000
Trade Test Specialist Training & Skills Upgrading
3190 New Panaderos St., Ext., Sta. Ana Manila
Tel. Nos. 532-5339/531-8133

Certification Information:

Executive Technical Consultants July 2000

Professional Skills:

 Mechanic
 Driver
 Vulcanizing Big & Small tires
 Lubrication all kinds of equipments

Character Reference:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 4758)

Go to Search Parameters...

Brief Description

I am a fully qualified Cost Engineer and Estimator and have contract claims experience. Please see resume for details.

Senior Executive with verifiable performance in the fields of Project / Operations Management and Techno-Commercial management in Shipyards and Oil & Gas industry.

Experienced General Manager with Emphasis on Sales and Operations

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

I am a grduate in Civil Engineering and an Exprerience of 34 years as Civil Engineer (5years work experience at El Kufrah, Govt. ofLibya). I have acquired Diploma in Computers in Office management in the year 1991 & utilised M.S. Word & Excel while sending formats to the World Bank, New Delhi.

Over 28 years in the engineering construction industry including more than ten years on international assignments

Seeking a job of Resident Engineer in Middle East (hoghways,infrastructure,buildings)holding more than 20 years experience in international companies.

Structural designer and progect engineer experienced in designing , supervising and progect management on large residental and industrial projects in Libya and Bulgaria,elegible to be member of Professional Engineers Association of Ontario, Exelent skill in desigh and inspection of steel and RCS

BS Business Administration Major in Accounting graduate and presently a Materials Management Manager

Estimating project managing scheduling coordination with general owner to make sure schedule can be met purchasing preparing submittals laying out preparing ASI's RFI's RFP's completing project from start to punch list.

I have more than 15 years experience in safety and environmental policy implementation for construction sites , drilling , workovers and explorations, refineries, pipelines, shipyard and offshore/onshore oilfields installations.I worked with clients Bechtel, Technip, Chiyoda, Brown and Root, Flour D

I'm a civil engineer andhad worked in different countries. I've been in this field for about 20 years.

Skilled building Quantity Surveyor with a degree and over twenty years of experience both as a PQS or Contractors Qs. Fields of performance include preparation of bills of quantities, bid documents , valuations, final accounts, claims, cost estimates, pricing, material schedules.

20 years of progressive EPC project contracts experience. Recent refinery up-grade construction contracts work in the arena of contracts administration are detailed on a comprehensive resume available upon request.

Thorough knowledge of all aspects involving residential,commercial and Industrial HVAC and Electrical systems. Extensive sxperience working and leading project teams worldwide in challenging technical environments and different cultures. Understanding and ability to work with other disciplines.

PMI and CMAA Certified Project Manager with a BSME avilibile for large scale Mechanical/HVAC Projects as a Senior Project Manager or Owners Rep. Willing to work Agency, Contract, Direct Hire and International Projects.

VP Sales used strategic planning to increase annual profit by $13 mm and sales by 17% in a declining market. Proficient in marketing and sales management (direct, business-to-business, consultative, & value added). Negotiated contracts in excess of $1 mm. Record sales in 5 of the past 9 years.

heighted , office oriented, global person

CNC Service Manager and Technician / Building Project Manager

Preparing Concrete profiles. „« Preparing P.T. Design Drawing and Shop Drawing as per the Engineers Design (ADAPT or RAM Programs).

Seeking for a position of Store Keeper where I can leverage my valuable experience of management skills with potential of growth and challenging environment. Confident and have potential to directs the work or other communications.

SAP Procurement

Welding Inspector 3.1, Welding Engineer

Postgraduate in Civil Engineering with specialization in Infrastructure, Highways & Bridges, Soil & Materials engineering & Project Management Systems with about 17 years of professional experience in construction supervision, design of Highways & Infrastructure projects

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

I am civil engineer, working as consruction planning engineer at Mott MacDonald India from India And seeking job at Austrilia with visa support from employer.

heavy equipment mechanic

CAD Drafter with 14 years of experience in most commonly used software for Architectural and Civil Engineering Firms.

run different types of cranes. friction, tower, experience in pile driveing. 30 yrs.e xperience

The maintenance of comprehensive accident and dangerous occurrence statistics for the Project

22+ years of professional knowledge and experience in QA/QC Engineering and Field Civil Construction on EDPC onshore oil/gas/petrochemical plants, defense, infrastructure projects in the Middle East, UAE, Iran and North Africa.

Engineering/Management professional offering expertise in domestic and international construction management and engineering support. Demonstrated proficiency in managing schedules, budgets and personnel for multiple projects with an emphasis on profitability in a variety of environments.

Entrepreneur; international construction materials trader; international business developer; real estate projects developer; building materials exporter; purchasing and sales of construction materials; manufacturer's representative; international contracts negotiator.

Licensed Civil Engineer with BS degree in Civil Engineering; over 20 years experience in Land Surveying and Civil Engineering in government projects (irrigation, dam, reservoir, roads), construction and surveying firms in the Philippines and abroad.

• Perspective gained through advancement from field operations, through front-line supervision to senior staff management and administrative positions.

HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.

I have over 35 year's experience in the Cement Industry, Machinery Manufacture, Refractory Technology, Large Projects Execution and Commissioning,

Over 25 years of experience of which have more than 15 years of experience in Developed Countries.

ELECTRICAL-MECHANICAL TECHNICIAN CONSTRUCTION – INDUSTRIAL & MANUFACTURING OPERATION & MAINTENANCE – COMMISSIONING – CONTROLS – LO-MED-HI VOLTAGE ELECTRICAL INSTALLATION & MAINTENANCE – HVACR – WATER AND WASTEWATER TREATMENT PLANT.

Responsible for all accounting activities from trial balance to financial statement and balance sheets and financial report from time to time, supervision & control of financial, cost & management accounts of the company up to finalization

Project Superintendent, Instrumentation, Piping, Civil, Electrical

Procurement & Supply Chain Management

Has twenty one (21) years of experience in the Field of Engineering, Design and Construction. Experienced in Front End Eng’g, Preliminary Eng’g & Detail Eng’g / Design Phase Work-share Execution, and Construction / Final Design / Eng’g Support for Construction / As-built Phase & Quantity Surveying.

I can run just about any kind of equitment you have To do a job in construction, I ran a crew of 20 men for 6 year's and built forms, poured concrete,built house's and metal buildings I can read blue print's I do have about 2 year's of oil field exp. Motorman and Floorhand, Some Driller asst. exp.

Executive Director, Operation In Charge, Managing Director

CAD Technician

Free! Experienced Project Manager, Divisional Manager, with a proven track record of success in Construction, Interiors and Finishing works. MEng Degree Mechanical Engineering, ILM level 5 Diploma in Management,CITB Appointed Persons.IOSHI Certified.B S Construction Health and Safety

Skill : Computer microsoft office, Auto CAD, GPS application and Mapping

Graudation in Political Science and Post Graduation

Survey and layout subdivision lots for rural and urban development and established and marked legal boundaries of properties using different kinds of surveying instruments.

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out