Resume - Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha...

Misco Jobs

Resume #77701

CONTACT INFORMATION:
View contact information...

Application for offshore Hydraulic crew post/ Riggers post

I would very much appreciate a chance to work in the offshore oil industry. Although I am a Qualified Hydraulic Specialist I have done an Off Shore Survival Course, and SAMTRAC through NOSA. I would like to enquire as to the possibility of employment as E.H.S. Officer, or, as part of a Hydraulic Crew or ROV Trainee, or any other position your company would suggest, on one of your offshore installations. I am more than willing and prepared to begin at the bottom and work my way up in your organization. As can be seen by my credentials I am a fast and willing learner.

At present I have no offshore experience and am thus very eager to actively participate in any training course(s) you expect me to attend and complete successfully in order to achieve my goal.

In Short:
I am an easygoing type of person and I get along with most people. I can and will work well under pressure alone or as part of a team. I also do not mind working away from home for extended periods of time. I can be trusted to do my work alone, as part of a team or as head of a team without any supervision. I am conscientious and responsible and can take and effectively carry out orders. I am hard working and I am prepared to undergo any drug test and medical examination your company requires. My past work and credentials indicate that I can be an asset to your esteemed company.

My Curriculum Vitae is attached hereto for your perusal, trusting that my qualifications equates to your high standards of employment. Certified true copies of my certificates are available at your request.

Personal Details
Nationality: S.A. Citizen by Birth
Marital Status: Married. (No dependents)
Language Ability: Fully Bilingual
Health: Excellent
Criminal Record: None
Religion: Dutch Reformed Church
Reliable Transport: Motor Vehicle.
Valid licenses: Code A & EC (Prof. Driving Permit: General &
Personnel. Expire 10.06.2009
School: Monument High. Grade 10. 1974

Education & Training Grade 10 & Post School
1. Trade courses and Trade test 02.01.1975 –
27.10.1978: Qualified as Aircraft Fitter
2. Petrols, Oils and Lubricants Quality Control
Completed 29.10.1981
3. Nosa Safety for Supervisors Completed
22.10.1982
4. Nosa Teletuition Safety training Course
1985
5. Senior Technical Course for Non Commissioned Officers 1986
6. Senior Technical Non Commissioned Officers Development Course 1986
7. Quality Management 1986
8. Life Enrichment Course 1988
9. Official Languages Testing Course (Africans & English) 1988
10. Quality Evaluation Course 1990
11. Life Enrichment Course 1990
12. First Aid Course 1991
13. Labour Relations Course for Supervisors 1993
14. Inspection, Preservation and Packaging Course. 1994
15. Aircraft Corrosion Control 1994
16. First Aid Course ?

Decorations and Medals: 1. Propatria Medal
2. Service Medal
3. Long Service Medal Bronze 10 Years
4. Long Service Medal Silver 20 Years
5. Unitas Medal

Commendations: 1. Colours Parade for Freedom of Hopefield
Signed by Mayor Baard 1989.
2. Expression of Thanks by AFB Langebaanweg for Good Service Signed by Col. Labuschagne

Computer Literacy: 1. M.S. Word
2. Excel
3. Internet & Email

Employment History / Job Description:

1. South African Air Force 1975 – 1996.

I. Qualified to work on following Aircraft, Airframe and Engine

Cessna 185 1st Line Servicings.
Kudu 1st and 2nd Line Servicings.
Dakota 1st Line Servicings.
Impala Mk1 Up to and Including 6 Monthly Servicings.
Bosbok 1st and 2nd Line Servicings

Competency for following Tasks on above Aircraft.
a. Marshalling b. Towing and Ground Handling c. Refueling d. Operating of Hobart Starters e. Ground Run f. 1st Line Servicing of Elect. Equip. as fitted to Kudu Aircraft. g. Removal and replacement of Safety Pins on Mk AS 06A Ejection Seats h. Operating and Driving Following Bowsers:
i. Bedford 4x4 4500LT ii. M/Benz 5000LT iii. Man 16000LT iv. M/Benz 26000LT i. Operating and driving Forklifts 3-7 T

Experience Gained in the Following Sections a. Head of Section Flight Line and Flight Line Servicings b. Aircraft Servicing Sections c. Base Aircraft Servicing Section d. Squadron Safety Officer at Air Force Base Langebaanweg for Three Years e. Acting Head of Section for Six Months Air Force Base Hoedspruit Mirage Engine Workshop f. Head of Section Wheel Bay Two Years Air Force Base Hoedspruit.

2. SMC Joint Venture 1997 – 1998
Worked as Hydraulic Fitter on Construction of Saldanha Steel
Assist with Construction of the Continuous Caster Hydraulic Systems including:

a. Hydraulic Pipe work from Hydraulic Room Valve Stands to Ladle Turret, Tundish Turret, Continuous Casting Machine (Segments), Pendulum
Shear, Rollout Table and Dummy Bar.
b. Charging of Hydraulic Accumulators. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. e. Commissioning of Systems
Assist with Construction of Electric Arc Furnace Hydraulic Systems including: a. Hydraulic Pipe Work in Hydraulic Room from Pumps to Valve Stands b. Hydraulic Pipe Work from Valve Stands to Furnace 1 and 2, Roof Lifting Cylinders, Roof Slew Motors, Roof Loosening Cylinders, Roof Elbows, Emergency Hydraulic Panels and Electrode Arm Turret. c. Charging of Hydraulic Accumulators. d. Flushing of Completed Systems. e. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. f. Commissioning of Systems. Assist with Construction of Ladle Heating Furnace Hydraulic Systems including: a. Hydraulic Pipes in Hydraulic Room from Pumps to Valve Stand b. Hydraulic Pipes from Valve Stand to Roof Lifting Cylinders, Electrode Arm Turret and Slew Motor. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc.

All of the above mentioned installations were done by bending 8mm up to 42mm stainless steel and carbon steel hydraulic tubing as well as installing ½" up to 24" stainless steel and carbon steel schedule piping. All pipe work was done with the assistance of coded welders.

My contract at SMC was ended upon the completion of the Steel Making Side of Saldanha Steel. An American Contracting Company – CBI, did the Iron Making Side of Saldanha Steel.

3. Fluid Flow Contracting up to 15 September 2008

Occupation: Hydraulic Specialist / Sales Manager.

a. As Hydraulic Specialist I did the flushing of the pipe work at the Corex at Saldanha Steel in conjunction with Raur Rine Chemicals for CBI b. As Hydraulic Specialist I did repairs on various Hydraulic Pumps, Motors, Cylinders and Valves directly for Fluid Flow Contracting. These were done in the workshop as well as on site. (The main make names dis- tributed by Fluid Flow are Parker, Vickers, Eaton, Charlyn, Bosch and Danfos, and thus I know them very well.)
c. I visited Industrial Sites to look at jobs, determined what spares will be needed, calculated how long it will take to do, considered safety aspects and all special equipment that will be needed to carry out particular installation or repair. d. Assisted with building of Hydraulic Power Packs and test Benches at Fluid Flow Workshop e. Assisted with planning, developing and manufacturing of a new Accumulation System at Pendulum Shear Hydraulic System at Continuous Caster at Saldanha Steel.
f. Worked on Shut Downs and Breakdowns at all hours of day and night. g. Was head of the day shift working on the repair (reinstall all hydraulic, pneumatic, water and grease pipes) at the Saldanha Steel Electric Arc Furnace Shell 1, after a Burn Through. Also lead the night shift repairing all of the same pipes at Saldanha Steel Electric Arc Furnace Shell 2, after a Burn Through.
h. Made up Hydraulic Hoses from single wire to multispiral hoses. i. Was part of the team Installing new Clay Gun and Drill on Furnace 2 at
Namakwa Sands Saldanha j. Designed and assisted in manufacturing of a Portable Tap Floor Drill for the Corex at Saldanha Steel. k. Modified Grease piping, Hydraulic piping and Water piping on Continuous Caster Segments to ensure quicker and easier changing of Segments on Breakouts and standard Maintenance. l. Was part of a 2 man team installing a 3" Pneumatic line complete with Dryer / Heater at Iron Granulation Plant at Saldanha Steel.
m. Designed 3" Refill line for Oil from Total Bulk Area to Continuous Caster Bulk Tank. (+/- 420m). Engineered Installation, Cleaning and Commissioning of line. n. Designed, contracted outside company for manufacturing, and was part of the 2 man team installing the Bin Opening & Closing Mechanism for
Tail end Bins on Mine at Namakwa Sands Brand se Baai.
o. Overall did various large Hydraulic, Pneumatic, Grease and Water Instal- lations at Namakwa Sands Saldanha, Namakwa Sands Brand se Baai, Saldanha Steel, Duferco Steel Processions, Southern Seas Fishing, Marine Products, Oranje Vis and Saldanha Fish Canning Factory. a. As Sales Manager all Incoming and Outgoing Sales were handled by me. I made sure that prices quoted corresponded with prices on delivery notes. I made sure that deliveries to the Stores were done on or before the dates stated on the clients official orders. I worked closely with the Workshop Manager to make sure that delivery notes for completed jobs went out in time to be signed off by the Client. b. I did Field / Site trips to look at jobs, ascertain what spares will be needed, calculated how long job will take to do, considered all safety aspects and special equipment needed to carry out installation or repair. c. Communicated with Clients to ensure that I know exactly what the client wanted done and made suggestions on how to do work in the Fastest, Safest and most Cost Efficient way. d. Also informed New and Existing Clients on what services and products we could provide them. e. Assisted Store Personnel at times when high volume of equipment was received from Suppliers and booked out to Clients. f. Did Quality Control Inspections on items received. Made sure that items were in sealed containers that part numbers, prices and quantities corres- ponded with order placed with Suppliers. g. Did Quality Control Inspections on items being booked out to Clients. All items specially manufactured by the company was to have Job Number stamped on it, must be sealed in a container, and must be accom- panied by a test certificate where applicable, in the correct quantities. h. Did Quality Control Inspections on items being booked out to Clients. All items received from Suppliers and supplied directly to Clients, were checked against the Clients Order to make sure that correct items, quantities and pricing were received. I also made sure that goods such as pumps, motors, valves and cylinders had test certificates supplied by the Main Supplier. Furthermore, I made certain that all threaded parts were protected. i. I followed up on orders and late deliveries and communicated with Client i.c.w. expected arrival date etc. j. Wrote official failure reports to Suppliers if goods supplied did not conform to standard of quality. k. Attended meetings at Distributors to keep up with latest equipment and procedures. l. Where items could not be obtained from local Distributors, I went on the internet to source goods from other Distributors, both in South Africa and Overseas. m. Sent enquiries to various Distributors / Suppliers to obtain the best Prices and Contracts.

Please Note.
1. All certificates and proof of training mentioned in this C.V. is available on interview.
2. Remuneration will be discussed during interview.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 4813)

Go to Search Parameters...

Brief Description

electrical design/project engineer with 14 years of work

Twenty years of varied experience in Sales and Marketing. Excellent communication skills in Spanish and English and acknowledged for having exceptional sales and management skills.

Have substantial supervisory experience in the maintenance of Heavy equipment, work well with in a team. My leadership skills are excellent and I have very good communication skills. Computer literacy is very proficient.

I have 30+ years experience in the Electrical/Instrumentation field, primarily involved in start-up of various types of facilities including LNG, oil refineries, chemical plants, automobile assembly plants, paper/steel mills, pharmaceutical clean rooms, and environmental clean-up sites.

I have been working in the construction field since 1972. I have extensive knowledge in construction of residential and commercial buildings.

Permanent (long term) employment in the construction industry. Equipment Manager or Master Mechanic position.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

To be considered for a responsible position such as, but not restricted to, a plant manager, project manager, operations and maintenance manager and/or a mobilization manager in either the utility and/or petroleum sectors.

30 years experience: project development -- operations management. Experience: alternate delivery -- design/bid/build; design/build; CM@Risk; program management. Work type: direct hire and subcontract management. Profit and loss responsibilities. Will relocate domestically for right opportunity.

Hi Please consider my resume for future construction Procurement positions.

I have 30 years total conceptual design experience. I take project from conceptual phase through vendor quotes to final manufacturing layout details.

I have a college degree in construction management, general construction estimating, plan reading and technical information, project and job site management, codes norms and regulations, health and job security, employee relations, construction law.

21 years in construction

Career Summary Wide ranging experience in Oil/Gas Industry of participating and co-ordinating multi disciplined workforce engaged in all aspects of Oil/Gas construction management activities. Career progression from project engineer to project co-ordinater and commercial co-ordinator.

Multi-skilled Individual seeking long term employment with company that has stability, and is committed to caring for its employees.

I have 20+ years of experience in the EPC arena, specializing in Project Controls. I have extensive experience in CPM , EVM & ERP. I have 14 years of experience with Primavera Software (administrator & superuser with Primavera P3, P3c, P3e & Teamplay).

OBJECTIVE: To secure a position with a company, long term, that will allow me to use my over 24 years of experience in construction to benefit the company fully.

I am a fully qualified and experienced Project Mechanical / Piping Designer capable of handling a project from initial concept to final handover utilizing current software, design codes and procedures being used in the Pharmaceutical / Chemical Industry.

Over 25 years of successful industrial construction management experience including projects exceeding $100M. Expertise and solid record of accomplishments in jump-starting stalled developments.

Summary of qualifications * Over thirty years of experience in design, engineering, and manufacturing of aerospace, military, marine, and commercial equipment with emphases on robotics and automation.

36 plus years as pipeline construction inspection/consultant.

25+ Years Experience, from managing to "hands-on". Commercial, industrial, institutional, manufacturing, health care, data centers, and petro-chemical installations, ranging in size from small $100m tent finish to $10MM prison, are all included in my past experience/projects.

INTERNATIONAL EXPERIENCE IN AFRICA,LATIN AMERICA AND RUSSIA-Experienced professional with above average communication and technical skills seeks mechanical maintenance position. Available now-single status.

Geotechnical or Port and Coastal engineering

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

Instrumentation Engineer with 3 years experience

B.Tech Petro chemical Engineering and Diploma in Industrial safety with 3 years Experience

Electrician

Materials expertise, inventory,issue and received handler

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

Architecture CAD Drafter

Experienced project manager in landscape sectors, 25 years practical management experience in commercial and residential fields including high-end, M.Sc. and B.Sc. horticulture, M.B.A. pending

Quantity Surveyor

Land Surveyor

Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha, South Africa doing Hydraulic maintenance. Have been doing all buying and selling and sourcing of goods over internet. Also went to site to do job estimations and Representative work. Did Offshore Survival course

Diploma in Civil Engineering,Civil QA/QC inspector

Mechanical engineer, qa qc engineer, construction engineer

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

In the last 18 years, I have directed activities and managed more than 36 long-and short-term projects valued at $200,000 to $20 million. My range of activities have spanned from staffing to contract negotiations to OSHA inspections to client interaction to project turnover and completion.

All phases of I&E project design, construction, commisioning and start-up with experience spanning 20+ years

I have over 13 years experience within various safety environments with varying responsibilities.

FABRICATION MANAGER with 34 years’ experience in Heavy Engineering Manufacture/Construction for the Oil&Gas/Petrochemical/Desalination/Power Generation industries (both onshore and off-shore markets in the UK/France/Italy/Poland/Netherlands/Mid-East/West Africa

Forty+ years – Design of Piping Systems and Plant Layout for Nuclear and Conventional Power Stations and Petrochemical Facilities. Of that time, approximately, 10 years of this time was spent in developing 3D area models and system drawings for various companies and projects.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Graduate With @.5 Yrs of Sales Experience

Electrical design engineer, lighting designer, single line diagram, fire alarm systems, cctv, site engineer, mep coordinator

Estimator in Interior Fit Out/ Buidling Construction

Resident technical officer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out