Resume - I’m experienced metal fabricator/boilermaker with skills in fabrication, assembl...

Misco Jobs

Resume #77729

CONTACT INFORMATION:
View contact information...

A Metal Fabricator (Boilermaker) with a wide range of experience in engineering. Able to work to a deadline to fulfill a production goal. Able to work on own initiative and as part of a team. Have good design, technology and problem solving skills. Dedicated to maintaining high quality standards
Summary of Experience
-5 Years Trade experience
-engineer's background
- Knowledge of machines and tools including their designs, uses, repair and maintenance.
- Strong ability to work from various type of drawings, ability to read drawings
- Stainless steel fabrication pattern making and developments
- Arc and Mig welding and Oxy – acetylene cutting
-Site work and plant maintenance, Shutdown
-Fabrication of structural, pipe and plate work

Employment History
Current Position Metal Fabricator (Boilermaker) ( top skilled category) in the Steelwork Shop
Date Commenced and Title
12.2008-date TISO (Open Joint-Stock Company "Processing and Special Equipment")
Duties, Job description
-read and interpret drawings, blueprints and specifications
-locate and mark bending and cutting lines onto workpiece
-cut, roll, bend or hammer metal products to fabricate parts or sub-assemblies
-preheat workpieces, using hand torch
-develop layout and plans sequence
-fabricate and assemble structural metal products ( framework or shells for machinery, ovens, tanks, stacks, and metal parts for buildings and bridges)
-set up and operate welding equipment ( manual and MIG/MAG welding) to complete welding tasks
-sets up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, and drill presses
-measure quality of fabricated parts or sub-assemblies using square, ruler, and measuring tapemark out metal stock with reference points and lines and makes templates
Previous Employers

1. Position: Shift Supervisor in Steelwork Shop
Date Commenced and Finished: 09.2007 – 11.2008
Duties, Job description:
-Supervised the work of a team consisted of welders, structural metal and platework fabricators and fitters, the maintenance staff; assigning them tasks, and motivating them to meet deadlines.
-Coordinate production startups, shutdowns, and changeovers.
-Maintains attendance records and rosters
-Responsible to meet shift production goals.
-Responsible for quality control. Make adjustments as necessary during shift to produce product within specifications. Reject product outside of specifications.
-Confer with managers to coordinate activities with other organisational units
-Ensure a clean and safe work area, explains and enforces safety regulations
-May perform the tasks of a metal fabricator

2. Position Metal Fabricator (Boilermaker) in the Steelwork Shop

Date Commenced and Finished: 08.2003-08.2007, 08.2001-11.2001 (Open Joint-Stock Company "Kramatorsk Heavy Machine-Tool Plant)

Duties, Job description
-read and interpret drawings, blueprints and specifications
-locate and mark bending and cutting lines onto workpiece
-cut, roll, bend or hammer metal products to fabricate parts or sub-assemblies
-preheat workpieces, using hand torch
-develop layout and plans sequence
-fabricate and assemble structural metal products ( framework or shells for machinery, ovens, tanks, stacks, and metal parts for buildings and bridges)
-set up and operate welding equipment ( manual and MIG/MAG welding) to complete welding tasks
-sets up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, and drill presses
-measure quality of fabricated parts or sub-assemblies using square, ruler, and measuring tape
-mark out metal stock with reference points and lines and makes templates

MAJOR ACHIEVEMENTS
More than once was given a bonus for perfect work.
In 2006 have been chosen to represent the collective of the plant on Convention of the Trade Unions in Kiev
In 2007 have occupied the second place in the town's contest The Person of the Year in nomination The Professional of the Year.

English Literacy
Speaking 5,5
Listening 6,5
Reading 7,0
Writing 6,5
Overall 6,5

Other languages Russian, Ukrainian – native speaker

Education
Bachelor of Science in Welding Fabrication (engineer-technologist diploma), Donbass State Engineering Academy, Kramatorsk, Donetsk region, Ukraine, 2001, average grade 4.8.

Trade Qualifications
06.08.2001-obtain trade qualification of 3rd class metal fabricator at Welding Fabrication Department (Open Joint-Stock Company "Kramatorsk Heavy Machine-Tool Plant)
01.08.2005-transferred to the position of a 4th class metal fabricator at the Steelwork Shop (Open Joint-Stock Company "Kramatorsk Heavy Machine-Tool Plant)
01.12.2008- was recognized as a 5th class metal fabricator (top level in Ukrainian classification) at the Steelwork Shop (Open Joint-Stock Company "Processing and Special Equipment", Kramatorsk)

Computer Systems Knowledge Windows XP, Office

Licenses and Certificates
Drivers License (car, light/ medium Vehicle)

Health * healthy

Hobbies and interests
Reading, listening music (especially rock- INXS, U-2, Rolling Stones), playing guitar

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 4798)

Go to Search Parameters...

Brief Description

Over 23 years of rich experience in Technical Training, Erection & Commissioning, Production Planning and control,Safety,Environment,Health, and Quality in the fertilizer industry and Petrochemical industry seek suitable new assignments in Training and Development in Fertiliser,Petroleum,Petroche

concrete/steel laborer, welder, machinist, truck driver.

PROFESSIONAL SKILLS: AutoCAD (All Old & Latest Version), Aconex (Online Document Management System) , MS-Word , MS-Excel , MS- Power Point and Internet etc.

•Knowledgeable in PLC troubleshooting ( Allen Bradley & Siemens Step 7, Omron and Keyence). •With experience in designing low voltage control systems. With experience in machine servicing and troubleshooting •Knowledgeable in Pneumatic & Electro-pneumatic system troubleshooting. •With background in

Geolgist having 2 year experience in construction

More than 15 years experience as a Commercial Manager, Contract Administrator and Quantity Surveyor working with Main Contractors and Consultants in the U.K, Middle East, Caribbean and South East Asia on a variety of Building, Oil & Gas, Civil, Power and major infrastructure projects.

A business development professional with skills in strategic management,project management,communication and public relations,negotiating skills.

Design and construction in bridge and road

D.A.E in Electronics and from last 7 years i am working in the field of CCTV & SECURITY SYSTEM as a SUB ENGINNIER +SALES ENGINNIER IN SAUDI ARABIA

Experienced in drafting commercial buildings, residential for permit processing and for shop drawing.

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Architect/landscape designer/graphics person

Project Control Engineer (Planning, Claims and Cost Control)

6 years from Military with lots of surveying .

Seeking work as heavy equipment operator. Willing to travel. Excellant references.

I'm an civil engineer with 6 years working experience which involving in residential and commercial building contruction as well as segmental bridge and cable stay bridge construction. I'm now being employed as assistant resident engineer for Penang Bridge Cable Stay Replacement Project.

Co-Ordination with all agents & Sub-contractors.

Effective in Inspection Trends and Hazards Identification as per OSHA requirements and standards. Has good ability in presentation of safety reports to higher authorities

Extensive experience in the construction industry in the field of architectural and civil/structural works of residenses, townhouses, condominiums and commercial buildings including interior and exterior finishing details. A highly motivated project supervisor, proven ability to solve site problems.

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

Looking for growth

Have one year job experience as a Ship design and Ms. degree in Naval Architecture subject .

Electrician Technician

bachelor of engineering (mechanical)

Direct and supervise work of subordinate members of surveying parties.

A highly motivated and dynamic Civil engineer with 10 years of experience in designing commercial and industrial structures. I am looking for a position of Civil Engineer/ Design Engineer in an organization where my experience and knowledge can be used to the best.

Have more than 10 years working i construction firm in Singapore as a M&E trades

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

QUANTITY SURVEYOR

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

MBA in SCM, Excellent Command in MS Office.

5 years working experiance as a QA/QC Engineer

Senior manager maintenance of Drilling water well & Mining drills and Screw compressors, man power Management, Guiding and training the service engineers, maintaining records and monitor the performance

Willing and able to perform ones job with less supervision

3d visualizer, archl draftman, interior designer, renderer, max/viz/photoshop/ vray, architect

I’m experienced metal fabricator/boilermaker with skills in fabrication, assembling, constructing, installing, erecting, demolish, repair, marking out, aligning and maintaining a wide variety of vessels, tanks, towers, boilers, hoists and other structures.

i m very hardworker

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

I have worked in the area of Geological and Geotechnical Engineering for over six years now. I am a quick learner and can adapt to other earth engineering fields. I would be a valuable asset to any firm that would give me a chance at employment.

31 yrs. old, 13 yrs heavy equipment accident free operation including all dozers, graders, scrapers, etc etc. Currently mainline hoe operator (345bl) thousands of hours roadbuilding, loading trucks and laying pipe. Extensive experience with gps and laser grade systems. Ability to cut grade.

i have 3 years of experience in structure analysis and design for industrial structures, substaton structures, Material handling plant structures. i am having strong hand on STAADPro and Autocad software.

Knowledge in Project management skills like Production control ,Costing ,Project control /Expediting ,Scheduling(Using MS Project), planning ,Preparing Bill of materials ,Procure materials ,Sub contractor control ,Quality activities ,Documents review, ITP preparations, Client meetings ,Design involv

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

I hold a B.Sc. degree in Civil Engineering, 15 years experience in construction project supervision and project management. Overall I'm capable of supervision/management of most types of construction projects.

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out