Resume - MapInfo professional 6.0, 8.0, 8.5,,Schema BTS Ultima,TEMS investigation 3.1, 4....

Misco Jobs

Resume #77774

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE

NOKIA SIEMENS NETWORKS PVT LTD

From August 2008 to till today I am working as RF Planning Engineer in Vodafone (Hutch) Gujarat project.

KELLY SERVICES (On Contract of NOKIA SIEMENS NETWORKS PVT LTD)

From November 2006 to August 2008 I was working as RF Planning and Optimization engineer in Vodafone (Hutch) Gujarat project.

EUPHORIA CONTROL SYSTEM

From May 2006 to November 2006 I was working as O & M Engineer in Euphoria Control System work on Idea Cellular Project.

RELIANCE INFOCOMM

I got my final year Degree Training in Reliance Infocoms as RF Trainee in RF Department- Ahmadabad. From Dec-2005 to May-2006.

CONSULTRONICS

I got my final year Diploma Training at Consultronics and also done job from Dec-2002 to Aug-2003 as ELECTRONICS Engineer and work on Microcontroller/Processor, PCB designing.

RF PLANNING AND OPTIMIZATION ENGINEER

I am an enthusiastic, highly motivated GSM Planning and Optimization Engineer valuable skills in Access Network Design with more than 2 years of experience in the Industry. I have Knowledge of various planning tools such as MapInfo, Schema, NetAct Planning Map grid and Path Loss. I am good team player, also capable of working alone and as Team Leader, enthusiastic, flexible, having skills and enthusiasm to administer, maintain and ensure maximum operative performance.

JOB RESPONSIBILITIES

RF Cell Planning
* Site Planning (Umbrella-Macro & Micro Cells) from coverage as well as capacity point of view for the whole Saurastra, Kutch and Surat region of Gujarat.
* Candidate identification and nominal planning, identifying the buildings/plots for newly planned sites, conducting Technical RF surveys & evaluating the best option from RF point of view.
* Antenna type selection, antenna height (Tilt) selection, antenna configuration selection for new sites.
* Initial dimensioning of the radio network.
Capacity Planning
* Coverage and Capacity planning and analysis.
* Addition of New Cell Sites and Upgrade of existing cell sites.
* Signaling/SDCCH dimensioning and Addition spectrum use.
* Traffic Management (Traffic monitoring & analysis for the cells and accordingly implementing the changes to meet the capacity requirements of the network (e.g. TRX addition & Cabinet Expansions).
Frequency Planning
* Radio Frequency planning (BCCH & MAIO), BSIC, HSN Planning & Neighbor planning for the new sites and preparing the database for the new sites, verification and tuning of the same for optimum network performance.
* Radio Frequency Planning using NOKIA's planning tool NetAct.
Other Planning Activities
* BSC Planning.
* LAC/RAC Planning.
* EDGE/GPRS Planning.
* Load Balancing of BSC and NSEI (Site migration, Re-Homing)
* Coverage predication & interference calculations for new sites.
* Site integration by doing drive test analysis.
* Planning for Dual Band (GSM 900 and GSM 1800) implementation.
* Indoor Coverage Planning for providing coverage in the Basement areas of the building with NOKIA's Metro, In-site and repeater.
* Handling customer queries regarding coverage problem and providing suitable solutions. Mapping the customer complaints on the MapInfo for identifying the coverage & quality problems in the Network.
* By checking / inspecting serving BTS site suggesting additional sites (Like indoor and outdoor Repeaters etc), if any. Performing Physical optimization of the network so as to minimize coverage holes & interference.
* Site audit for checking all physical parameter (Antenna orientation, Tilt, Antenna Type, Azimuth) related to RF.
* Conduction of Acceptance testing procedure which includes submitting plots of C/I, RXQual, RxLevel and call testing for measuring CSSR, Dropped Call, HOSR, SQI.

RF Optimization

High quality of service in mobile networks is the prerequisite for the commercial success. Continuous optimization is a process, which focuses on checking the network quality continuously and takes actions when needed. It is a more constant way of maintaining good quality in the network, especially when the mobile networks are changing rapidly and more and more customers are being served.

* Parameter Configuration Check (OMC Audit), Traffic and throughput analysis, Parameter planning and optimization.
* Dropped call analysis, Handover success analysis, Drive test analysis, Interference analysis.
* Field measurements and acceptance testing, Frequency & Strategy Planning, Top N Site Targeting
* Monitoring the network performance & improving it as per objective and keeping Quality of Service to optimum level.
* Site splitting, Optimization of Antenna height & Tilt on the basis of various reports (Cell by dominance distance-232 and Undefined Adj.-073) & drive test.
* AMR FR/HR implementation & Optimization.
* Daily Network Health Monitoring and accordingly taking action on key performance indicator parameters (e.g. DCR, CSSR, HO failures, Interference,
* TCH/SDCCH assignment, TCH/SDCCH Completion, DL Quality) to meet the network benchmarks.
* Optimizing the BSS parameters: Taking export of all the BSS parameters from the OMCR. Fine tuning the parameters as per the requirement.
* Locating coverage holes and improving coverage area along with expanding coverage areas.
* Neighbor list analysis, drop call analysis, traffic analysis.
* Network wide performance analysis of Dual band Cells (e.g. Traffic carried by 900 & 1800 layers & quality issues).
* Optimizing the antenna orientation and tilt for GSM coverage and C/I enhancement.
* Identify the hardware or software problem which affects the network performance.
* Taking care of congestion & blocking either by adding new carriers to the cell, by adding new sites after locating Hot Spots areas or by implementing new features like Half Rate, Directed Retry, AMR,AMH etc…
* Implementation of new features into the existing network (e.g. Power Control, AMR & EDGE)
* Analyzing Cell Doctor Reports from NMS to meet desired KPi (NQI) which include Call Setup Success Rate, Drop Call Rate, Rx Quality for UL/DL, Rx level for UL/DL, Handover Success Rate etc.
* Daily monitoring system affected Alarm (BTS/BSC level).
Drive Testing and Benchmarking

Voice and Data Optimization: we use all available sources of data to optimize and manage wireless networks.

Some of the data sources are:
* Drive test data
* Layer 2/3 analysis
* Neighbor-list/frequency planning and parameters tuning
* Using daily and BBH KPI analysis
* Call detail logs (ND Reports 204,216) analysis
* Capacity, traffic, and handoff reports
* Reverse link analysis
* Neighbor list prioritization
* RF site integration through single cell functionality testing (Shakedown/Sector testing)
* Cluster drive testing using short and long calls
* Competitive analysis & benchmarking
KNOWLEDGE OF TOOLS

Software:
* MapInfo professional 6.0, 8.0, 8.5.
* Schema BTS Ultima Forte for frequency planning, Neighbor list planning, prediction etc…
* TEMS investigation 3.1, 4.1, 5.1, 6.1.3 Agilent, Nemo for drive test (Data collecting tools).
* NetAct Planner (Prediction)
* Nokia NetAct Plan Editor 4.5 (Parameter Audit)
* Net monitor for trouble shooting the serving site performance.
* Google Earth for physical planning of site.

Hardware:

* BTS Site master.
* CDMA link master.
* Frequency generator/scanner.
* GPS (76S, 12XL, 72).
* TEMS 3.1, 4.1, 5.1, Agilent, Nemo Drive Test kit.
* Spectrum analyzer.
* Tilt meter, Millimeter.

INDUSTRIAL TRAINING
* BASIC GSM TRAINING, in this training we study about GSM network architecture, Function of different equipment, GSM speech coding, GSM basic operation.
* SYSTRA TRAINING, in this training we study about Introduction of GSM, Traffic Management, Signaling, Transmission, Network Planning.
* BASIC ANTENNA THEORY this training cover all definitions, Base station antenna, Particular technique used in GSM 900 and DCS 1800, Antenna specifications.
* SCHEMA ULTIMA FORTE TRAINING this tool is used for automatic BCCH Planning, TCH Planning, MAIO Planning, MS Planning and NEIGHBOUR Planning.
* BSS-PARA TRAINING In this training we study all the BSC LEVEL parameter, BCF LEVEL parameter, ADJC HOC POC LEVEL parameter, SEG BTS TRX LEVEL parameter, RADIO RESOURCE Management, Intelligent Underlay Overlay, Dual Band Feature, Voice channel coding FR HR AMR.
* RF OPTIMIZATION TRAINING in this training we Understand RF Network cycle, Basic of RF design, Optimization stages, Database parameter Optimization.

PROJECT
* I have done drive test from Ahmedabad to Okha in Railway (more than 500 Km.) for cell site coverage of Vodafone Gujarat Network, and plan coverage sites for same, it was my great experience and I learnt lot.
* I have implemented the feature CS3-CS4 parameters in more than 70 BSC's of Vodafone Gujarat Network and get better user perception at GPRS/EDGE, also done load balancing by calculating timeslot on PCU (CDEF and EDAP).
* During Vodafone Network Audit, which was executed by TECH MAHINDRA, I have done Schema (Automatic Frequency/Handover plan), check BTS level parameters for Ahmedabad and Surat city (having more than 32 BSC's).
* I have done symmetry (Cell having GSM standard angle 0-120-240) in Gandhidham city having more than 40 sites and get improvement in quality and RxLevel also reduce the customer complains.
ACADEMICS

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 4813)

Go to Search Parameters...

Brief Description

3 years diploma in mechanical engineering

LAND SURVEYOR

MicroStation 3D Modeler

Knowlegeable on 2D&3D AutoCAD Drafting, ArchiCAD, Vectorworks, Photoshop, Office Apllication, - Word and Excel, Outlook , Internet, Manual and Computerized Rendering, Mechanical/ Conveyor Technology (as per ASTM, ISO, JIS, and Other Drawing Standards), well versed on the English System Units.

Electrical Project Manager 20+ years experience

Master Operator with exceptional work ethic.

MapInfo professional 6.0, 8.0, 8.5,,Schema BTS Ultima,TEMS investigation 3.1, 4.1, 5.1, 6.1.3 Agilent, Nemo for drive test (Data collecting tools

Bachelor of Science in Construction Management,National Certificate in Construction studie· Advanced in AutoCAD 2006. Broad knowledge of building trades. Carpentry, Plastering ,Tiling, Plumbing

NDT Level II Magnetic Inspection and Penetrant Inspection

To achieve a job as ¡§Safety Professional¡¨ in an augustive organization where I can deliver the best of my performance implementing managements safety policies and procedures

I am a certified lead auditor in ISO ¡V 9001, OHSAS 18001, ISO 14001 standards.

Have worked in all departments of construction project sites, well knowledge in computers

Licensed Civil Engineer, exposure to project / construction management for 8 years, assigned to do field and office engineering works like field inspection, work monitoring, and cost estimates for 3 years, familiar with basic forms of contracts-FIDIC, CIAP, computer literate - MS office application

I¡¦m a B.E.,(Mechanical Engineering) graduate, graduated from Bharathiar University, Coimbatore (South India) with First class during the year 1992. I have a rich 12+ years of experience in various fields mainly in the area of projects Execution.

I AM A MECHANICAL ENGINEER WITH 8 YRS EXP IN MANAGING PROJECTSITES AT BPCL,IPCL IN INDIA,FABRICATION AND ERECTION OF PIPELINE,MAITENANCE OF PIPELINE ERECTION OF EQUIPMENT PRESENTLY IN DUBAI ON VISIT VISA AND LOOKING FOR EMPLOYMENT IN UAE.CAN SPEAK BOTH ENGLISH AND RUSSIAN LANGUAGE.

Target oriented professional with excellent leadership skills, proactive attitude and mastering strong inter-personal relations with people of different cultures.

worked as junior engineer on various projects around the world. Adapt easily to harsh conditions.

I am searching for employment with a company that has satiability and longevity.

Total Experience is of twelve Years encompassing Senior Civil Engineer for Eight Years and Site Engineer for Five years and as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

Over Ten (10) Years of solid working experience in the sales and customer service environments for Radiology Equipment & Spare parts, Laboratories Equipment & Accessories, Nuclear Medicine, and QC/QA Test Tools. Maintain excellent customer service skills and a proven record as a top sales performer.

20 yrs exp residential contractor

Mechanical engineer with nearly 13 yrs experience in petrochemicals and power plants as project and maintanence engineer

MICROSTATION V8

Passed the licensure examination for Civil Engineers last May 2008. Have 1-yr experience in construction managament. Have knowledge on Excel and CAD Programs. Hard working. Good in oral and communications skill.

3 years working in the construction site with arabtec u.a.e. projects such as dubai airport, DIFC, and now in infinity tower

Skilled painter with experience in the industry.

ERECTION AND COMMISSIONING ACTIVITES

Senior Estimation Engineer for oil and gas construction projects

Circa 30 years work experience (10 years Middle-East / Africa)

25+ years Upstream Project Controls Management across all stages of Oil & Gas E&P Business Process Life Cycle:

Presently I am working in Wade Adams Dubai As a Health&Safety Officer

M.E. Civil in Transportation Engineer with I-Class

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.

Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT

Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.

Implementation Manager or Technical Project manager

Interprets plans, conducting quality control as inspector, preparing welding procedures as a welding engineer, and controlling/monitoring project activities/ preparing documents for the fabrication of boiler components shall hopefully contribute to your requirements.

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

for a vacancy in your organization for Quantity Surveyor / Civil Engineer.

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.

Contracts Engineer, Cost Engineer, Quantity Surveyor

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Graduate Civil Engineer working as Senior Quantity Surveyor with over 13 years of experience in construction industry ranging from Bridges, Highways and Building structures. I have also been designated as a Certified Cost Engineer by the AACEI in October 2008. Well versed with FIDIC, CESSM3 & POMI

I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out