Resume - -Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2...

Misco Jobs

Resume #77788

CONTACT INFORMATION:
View contact information...

Personal Data:
Date of Birth: 31 March 1975
Nationality: Egyptian
Marital Status: Single
Education: B.Sc. of Civil Engineering 1999, Cairo University
School: The Holy Family School – Helwan.
Language Skills: Arabic: Mother tongue
: English: Fluent / French: Good

Objective: Senior Planning Engineer in large scale projects (Power Plants / On-shore & Off-shore Oil & Gas / Industrial)
Computer Skills:
-Primavera (Deep knowledge and experience)
-AutoCAD 2-D (Professional use)
-SAFRAN planning program.
-Workable knowledge with SAP2000 & PDMS.
-Microsoft Office Programs.
Job Qualifications:
Construction / Commissioning Planning Engineer:
- Preparing, Updating & Following up the planning schedules for engineering / manpower / materials / fabrication / delivery / construction & commissioning activities using Primavera & Excel programs.
- Monitoring progress, productivity & preparing the Weekly, Fortnight & Monthly Reports.
Technical Office Engineer:
-Engineering & Coordination work for civil activities on site (Concrete & Steel structures / Landscaping / under ground networks / Marine work ).
-Preparing, Review and Issue Workshop drawings for Steel & Concrete Structures.
-Preparing, Review and Issue the Bill of Quantities (B.O.Q.'s).
-Solving Technical problems on site through R.F.I.'s / N.C.R.'s / D.M.R.'s).
-Workable knowledge with International Standards.

RECORD OF PREVIOUS EXPERIENCE:

June 2008 to Present, SICIM S.p.A. – Kazakhstan.
Technical Office / Planning Engineer for KASHAGAN DEVELOPMENT EXPERIMENTAL PROGRAM project – under ground network facilities (SICIM scope).
DUTIES:
-Following up the Fabrication, Construction progress for the under ground network (Manholes, Catch Basins, Fire Water, Oily Water (gravity & pressurized), Closed Drain,. .etc.).
-Following up material plan and delivery on site.
-Preparing the GA & Co-ordination drawings for under ground network facilities.
-Attending the Weekly / Monthly engineering meetings.
-Preparing & following up the TQ from SICIM to client (AGIP).
-Training SICIM staff for using Primavera program / preparing & updating the schedule / managing the resources & budget / preparing the weekly & monthly reports.

December 2007 to May 2008, MIS – SHARJAH / UAE (Maritime Industrial Services) - (International Petroleum Services Company)
Project Planning Engineer for Construction of Off-shore F & G SUPER M2 JACKUPDRILLING RIG-1 (8000 tons) Project.
DUTIES:
-Following up the Rig Fabrication, Construction & Mechanical Completion (MC) progress for different disciplines (Electrical, Mechanical, Instruments, Piping,...etc).
-Updating the Primavera planning program & preparing the weekly / Fortnight / Monthly progress reports.
-Preparing the Man-hour Histogram, S-Curve & Trend Analysis for all disciplines (Engineering, Procurement, Construction & Commissioning).
-Attending the procurement and production progress meetings.
-Preparing Monthly, Fortnightly & Weekly progress report for all disciplines.
-Managing the budgeted man-hours for the base scope & change orders per job numbers.

June 2007 to November 2007, BP - British Petroleum (International British Petroleum Company)
Construction / Commissioning Planning Engineer for SAQQARA On-shore & Off-shore Project (Alexandria - On-shore for Construction & Pre-Commissioning work / Ras Shukier – On-shore Terminal & Off-shore Installation, Hook-up & Commissioning work).
DUTIES:
On-shore work:
-Following up the Deck Fabrication, Construction & Mechanical Completion (MC) progress for different disciplines (Electrical, Mechanical, Instruments, Piping,...etc).
-Updating the Primavera planning program & preparing the weekly progress reports.
-Attending the weekly and monthly progress meetings.
Off-shore work:
Preparing the Off-shore hour by hour plan for the following:
-Deck lifting & installation activities (equipment, tools, manpower, transportation,…etc.)
-Hook up activities (Production line, Drain caisson, Sea water caisson, Umbilical,…etc)
-Commissioning activities (Electrical, Instruments, Piping, Mechanical,…etc.)
-Production line sub-sea activities (Flooding, cleaning/Pigging, Hydro-test,…etc.).

January 2006. to October 2006, William HARE International British Company – UAE-Abu Dhabi)
Engineering Dept. - Senior Planning Engineer (for Company LNG projects in Qatar & Other projects in the Gulf Countries).
Company Profile: William HARE is one of the large scale international companies specialized in steel design, detailing & fabrication.
Company Projects: W. HARE is the Contractor Company which prepares the connection design, detailing and fabrication for all steel structures in Qatar Gas LNG Onshore project in Qatar, besides preparing the engineering and fabrication for steel structures for other large scale projects located in Saudi Arabia & other countries.
DUTIES:
-Planning work & following up engineering time schedules for W. HARE branches in UAE, India & Manila for above company projects.
-Planning work & Technical co-ordination between William HARE and the client (Technip / JGC / CHIYODA / GEA BTT / Snamprogetti).
-Arranging & Following up the engineering plan with clients to issue IFC documents (Issued For Construction) from Clients.
-Following up with clients the TQ's (Technical Queries) issued from W. HARE.
-Planning & Following up the updating for new revisions and modifications received from Clients.
-Attending the weekly & monthly meetings with the clients to follow up the over all engineering schedule and progress.
-Managing the engineering man power & Expediting work progress in W. HARE branches.

June 2005. to September 2005, CRC (Construction and Reconstruction Engineering Company – UAE-Dubai & QATAR-Doha)
Technical Office Engineer- ( Quantity Surveying & Workshop Drawings) for The company projects in UAE and QATAR.
DUTIES:
-Preparing, Review the Bill of Quantities for Tenders and final B.O.Q.'s.
-Prepare the Price list for B.O.Q.'s.
-Preparation & Review the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Solving Technical problems on site asked by the Sub Contractors by "Request For Information's" (R.F.I's).

April. 2005 to May 2005, Samsung (International Company - Main contractor)
Technical Office Engineer in the project of the American University in Cairo – New Campus Development.
DUTIES:
-Engineering work for Concrete & Steel structures.
-Preparation, Review and Issue the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Preparation, review and issue Bill of Quantities (B.O.Q.).

April. 2004 to March. 2005, e.construct (UAE Company specialized in Pre-cast and Pre-stressed concrete).
Technical Office Engineer in e.construct Branch in EGYPT.

PROJECT: Pre-cast Concrete Cladding for Marina Height Towers (220 meter height towers in Dubai).
DUTIES:
-Engineering work for Pre-cast Concrete Cladding Panels.
-Preparation, Review and Issue the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Preparation, review and issue Bill of Quantities (B.O.Q.).

December. 2000 to January. 2004, " E.D.F. Electricité de France
( International French Company ), ( The Owner ) "
Technical Office/Q.S. Engineer in "Suez Gulf gas - fuel fired power plant 782 MW, 330 Million Dollar (During Construction, Commissioning and Warranty period).

DUTIES:

-Engineering work for Steel structures in the Boiler Units, Turbine Hall Building, Electrical & Pipe Racks and Steel access Platforms.
-Preparing Steel Workshop Drawings Using AutoCAD program.
-Review Erection drawings for Steel Structures.
-Preparation, review and issue Bill of Quantities (B.O.Q. list) for Steel Drawings.
-Solving Technical problems on site asked by the Contractors by "Request For Information's" (R.F.I's) or "Non Conformance Records" (N.C.R.'s).
-Preparing Concrete Formwork and Reinforcement Workshop drawings.
-Review construction drawings.
-Preparation, review and issue Bill of Quantities (B.O.Q.) for Concrete Drawings.
-Geometry, Leveling and Coordinates of location for internal & external access roads.
-Update the Under Ground Network & Standards.
-Work Using PDMS program to make the 3D model for the Guide Drawings for Buildings.
-Making Download, Printing and Filing for all the project drawings and documents received by Email.

August, 2000 to November 2000, KAHROMIKA – Egyptian company
Technical Office Engineer in BENI-SUEF Cement Plant.

DUTIES:

-Engineering work for Clinker Grinding Steel structures.
-Preparing Steel Workshop drawings using AutoCAD program for:
* Main Columns.
* Main Girders.
* Floor Beams.

November 1999 to July 2000, OSMAN GROUP – Egyptian Company
Technical Office Engineer in Dream Land Project – Villa Apartment.

DUTIES:

-Preparation and Review the Workshop drawings for Concrete dimensions, Reinforcement, Brick work, Wet finishing and As Built using AutoCAD program.

August 1996 – July 1997, ARAB CONTRACTORS (Egyptian Company)- Consulting Engineering and Technical Services (CETS).
Assistant for Quality Department Manager during preparation for ISO 9001 Certificate.

DUTIES:

-Preparation for ISO 9001 documents for all departments.
-Preparing Official Forms to arrange work between the different departments.
-Supervise and Check that all the departments are work according to the ISO documents issued from the Quality department.
-Update the ISO documents according to any changes in the Quality system in each department.
-Filling for all documents of ISO system.

August 1997, ARAB CONTRACTORS – Egyptian Company
Trained as Site Engineer In the project of EL-Mouneeb Bridge.

July 1995, ARAB CONTRACTORS – Egyptian Company
Trained as Site Engineer In the project of Helwan University.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 4813)

Go to Search Parameters...

Brief Description

HND Architecture, PGD Architecture, MBA

A pioneering, professionally qualified and hard working Graduate Quantity Surveyor narrowed towards achieving goals in a competitive environment

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

Diploma in Civil engineering, Experienced in Architectural drafting, Detailings in Autocad, Site supervisions, Experience of 7 years in similar field.

IT Manager

I am a civil engineering diploma holder with 8 years exp.in high rise residential and commercial buildings.

Several years of experience in CAD drafting in wood carpentry including 10 months work in Middle East, at present I work as Bulk Handling Design Engineer in a European company, part of my work is to design bulk handling system of cement cargo ship and supply vessels including loaders and unloaders,

NVQ level 2 Scaffolder with 8 years experience and offshore experience. Offshore survival and full medical

Advanced skills for professional design in 3D (Autodesk Inventor 2009)

Computers, home building from foundation up. Media instalations (cable industry work)

Bulldozer Operator, performed pre and post operation of the bulldozer

Master Electrician

11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

sr;mechanical engineer /project engineer/construction engineer/manager/engineer

Program/Project Manager

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

Over 15 Years of Management in Operations, Manufacturing, Installations, Utility / Facility Maintenance, Repairs, Distribution, Capital Equipment Purchasing, Equipment Maintenance, Transportation Maintenance, Minor/Major Construction and Fixed Firm Price/ Contracts

Field Construction Engineer

I would like to further my career in maintenance and would enjoy the opportunity and challenges that this opportunity would offer. I believe I have the skills and knowledge that would be an asset to any operations.

OBJECTIVE Senior site agent/ project manager within the commercial construction or civil industry. Remuneration negotiable (from € 50000 p.a. plus benefits), depending on position and region where contract is offered. Would consider any international placement.

Selling Skill, IT-Presales, Management

Facilities Construction Planner and Overseer

Automotive and Locomotive Mechanic - Knowledgable and Reliable

Free! Program Director Construction Large Projects SE Asia Hotel, Embassy, High Rise, Medical, Retail, Data Facilities, Power, Roads, MEP Thailand Vietnam Korea Philippines

-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill

19 yrs. experience in the construction industry as a foreman/heavy equipment operator/mason Extensive training to accurately and safely operate heavy equipment First Aid and CPR Certified

10 years experience with crane, lifting and rigging. certified in all aspects. looking for a professional company with potential for advancement

Field Tech Mechanic

I have over ten years experience in the building and facility maintenance and management. I hired and trained technicians for HVACs; Carpentry, Plumbing, Electrical, Appliance Repairs and Mechanical. I graduated from vocational high in Air-Conditioning and Refrigeration.

Graduate Mechanical Engineer with ASNT level-2 NDT and CNC part programming .

Document controller, 2-year experience with the largest private master developer in the UAE

Plate welder (SMAW,FCAW,GTAW)

Eleven years of hands-on experience and proficiency with Autocad Architectural Desktop, including version 2008

Qualified Civil Engineer (BE Hons) having Experience in Excecution, Planning, Billing, Monitoring. Currently working with GMR (Badrinath) Energy Ltd.as an Executive -Civil (site) on a 300 MW Hydro Power Generation Project

welder

BE IN MECHANICAL ENGINEER. I HAVE 2 YEARS EXPERIENCE IN STRUCTURAL STEEL ERECTION

Project Manager

15 years in Fabrication, Construction, Installation, Hook-Up , Pre-commissioning, commissioning works of offshore Process platform, jackets,decks,bridges, modules, laying of sub-sea pipeline, Graduate Engg, Piping Engg,CSWIP3.2, B'Gas, API510, 653,570,ASNT LevelI, AUT Interpretor, IRCA Lead Auditor,

Experienced sandblaster/painter/foreman/safety tech

Engineer (Insulation, Painting, Fireproofing, Hvac, Scaffolding & Refractory)

Knowledgeable in fossil fuel (coal), power plant bulk materials operations. International experience.

Construction Engineer with core skills in Project Management, Contracts, Facilities and Value Engineering

I have a lot of years of hands on experience in the plumbing industry I can lead large groups of technicians effectively through out all phases of any construction project. I strongly believe that I can easily handle any job regardless of size

Project Planning & Coordination, Cost Control & material Procurement

Resume consist of Personal Data, Employment History & Field of experience.

To Pursue a Challenging Career in Project Management, Engineering, Construction, Oil / Gas and Power Generation related work Offshore or Onshore.

Professionally qualified accountant in South Africa (CPA). Based in South Africa with work experience in Canada, USA and Mozambique. Varied industries include 10 years in engineering, construction and project management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out