Resume - Fifteen years experience in the oil and gas industry. Five years overseas work e...

Misco Jobs

Resume #77987

CONTACT INFORMATION:
View contact information...

Work Experience
Senior Mechanical Engineer AMEC Berca Indonesia, Jakarta, Indonesia 2007 to present
AMEC Berca Indonesia is a joint venture between the UK based international engineering company AMEC, and Indonesia's CCM group. The project I am currently involved with is engineering support for the construction of two offshore drilling platforms deployed off the eastern coast of Russia. The client is Sakhalin Energy and Investment Company (SEIC) a consortium involving Royal Dutch Shell and Russia's Gazprom.
* Troubleshooting and re-design of diesel fuel system for power turbines including pumps, heater and filtration system.
* Analysis of vibration problem with large API 610 firewater pumps.
* Installation of API 674 high pressure positive displacement pumps.
* Troubleshooting of a glycol heating system used for waste heat recovery and space heating.
* Gained familiarity with HVAC system design for offshore platforms.
* Use of HYSYS for hydraulic calculations and basic process simulation.
* Experience with various other equipment, including turbine power generators, diesel engine power generators, diaphragm pumps, pipe penetration fire seals, hoists, winches, padeyes, Stabmaster.

Mechanical Design Engineer Waha Oil Company, Tripoli, Libya 2003 to 2007
Waha Oil Company is jointly owned and managed by Conoco-Phillips, Amerada Hess, Marathon Petroleum and the National Oil Company of Libya. This position primarily involved design and management of oilfield facility upgrade projects.
* Installation of API 610 vertical and horizontal centrifugal pumps, rotary displacement meters, meter prover.
* Replacement of fuel gas supply systems for power turbines at two sites. Project involved the replacement of fired heaters, filter/separators, knock-out drums and interconnecting piping and control valves.
* Installation of fire detection and extinguishing system for crude oil storage tanks.
* Installation of fiberglass produced water piping system.
* Design duties included performing basic process modeling such as hydraulic calculations, working with drafting co-workers in the preparation of process schematics and arrangement drawings, reviewing vendor design drawings to ensure compliance with design standards.
* Project management duties included budget preparation, tracking project labor and material costs, coordinating with construction personnel, overseeing commissioning of equipment.
* Gained familiarity with API 610 for centrifugal pumps and API 682 for mechanical seals.
* Gained experience using HYSYS for process modeling.
* Provided mechanical engineering support to civil engineering projects such as evaluating and selecting ventilation and air conditioning equipment for installation in new buildings.

Mech. Design/Appl. Engineer Weatherford Global Compression, Calgary, Canada 1994 to 2001
Weatherford Global Compression (now Exterran) is a packager of reciprocating natural gas compressors, approximately 100hp to 6000hp in size. I had two positions at this company first in the applications department, preparing quotations for compressor projects, then in the engineering department in a design and technical support role with some project management duties.

Mechanical Design Engineering Position:
* Performed design and analysis of natural gas process and utility fluid systems for natural gas compressors.
* Selected components for process gas and utility fluid systems, such as manual valves, control valves, pumps, heat exchangers, transmitters, RTD's, thermocouples, switches and gauges.
* Designed structural and rotating systems for natural gas compressors.
* Designed pressure vessels and pressure piping to ASME codes.
* Researched rectangular flange design for pressure vessels and wrote a spreadsheet to perform the design calculations, saving the continued expense of hiring consulting firms to perform the calculations.
* Developed a procedure to design nozzles for pressure vessels, which standardized and improved the efficiency of the designs.
* Provided design concepts and calculations for development of standard intake and exhaust systems.
* Performed troubleshooting of operational problems with existing equipment.

Applications Engineer Position:
* Sized and selected major equipment to be offered in quotations on compression projects.
* Reviewed and commented on customer specifications (sometimes quite lengthy).
* Prepared design specifications for sub-equipment and solicited quotations from suppliers.

Engineer In Training Pillar Oilfield Projects Ltd., Calgary, Canada 1993
Worked at two oilfield construction sites in northern Alberta.
* Gained knowledge of field fabrication practices of piping systems, primarily welding.
* Observed types and usage of heavy equipment used in field construction projects.
* Gained knowledge of the types and usage of handheld tools.

Education
B.Sc. Mechanical Engineering University of Calgary, Calgary, Canada Graduated in 1993
* Overall GPA of 3.29 (4.00). Dean's List. Approximate class standing was fourth out of 70 students.
* Awarded Pearson Memorial Bursary and Trans-Alta Bursary for outstanding academic achievement.
* Completed two graduate level natural gas processing courses that included instruction on using HYSYS process simulation software.
* Completed an undergraduate course on Finite Element Analysis in the winter of 2003. This course included two projects using ANSYS version 6.

Professional Registrations and Memberships
* Registered with the Alberta Professional Engineers Geologists and Geophysicists Association (APEGGA).
* Member of the American Society of Mechanical Engineers (ASME). On the Board of Directors of the Southern Alberta Section of the ASME in 2002-03.

Career Interests, Hobbies, Miscellaneous
* Citizenship in three countries: Canada, USA and Ireland.
* Other areas of interest within the field of mechanical engineering include alternative energy systems, design for energy efficiency, fuel cells and hydrogen energy, control systems, mechatronics.
* Member of the board of directors of the condo building where I reside.
* Mechanical aptitude. Examples include hands-on projects requiring the use of basic hand tools such as performing auto repairs, the most complex being a transmission re-build.
* I very much enjoy traveling to and working overseas. The countries I have traveled to so far, starting with the most recent, are: Japan, China, Singapore, Indonesia, France, Spain, Russia, Egypt, Switzerland, Czech Republic, UK, Austria, Italy, Germany, Libya, Malta, Guatemala, Mexico, USA.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 4757)

Go to Search Parameters...

Brief Description

I am willing to relocate my current company is closing. I love working on construction sites and prefer to stay in the mining or construction field

Civil engineer with more than five years combined experience in Civil Design, Engineering and Project Management

More than 10 years practical experience in the technical side of the risks of the Oil&Gas business

Seeking Project Engineer or Sr Process Engineer position worldwide based out of Houston Texas

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Construction Project Manager

I have around 15 years experience as a machine operator on 180 360 degree machines also dozers and dumptrucks. Also as foreman with a groundworks contractor and two years as assistant plant manager with a plant rental company. I am looking for similar work at home or abroad.

An energetic individual with an MBA and construction experience seeking for a challenging job with an institution in the Middle East that rewards creativity and hard work and helps me grow and contribute to the overall success of the firm.

This resume is a compilation of my past and present working experience. I feel that I am qualified for many positions and I believe that my resume is proof of that.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Geotechnical Engineer working in design, planning, technical follow, contract administration, reporting, financial studies and cost control of underground works such as DW, Piles, Grouting, Tunnelling, Dewatering.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

Working HSE Engineer with 7 years of experience and 2 years in Oil and Gas field in UAE

EPCM Project Manager, Design Manager, Contract Administrator, Construction Manager, 10 years experinece, Bachelor of Civil Engineering

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

Properly carry out construction wok including supervision of projects as directed by project or Design Engineer. College Diploma in Construction Trade, National Technical Certificate, Federal Trade Test Certificate, National Diploma in Building Technology

Camp Boss

Worked with BOROUGE as MECHANICAL SUPERVISOR through TECNIMONT from 11th MAY 2008 to 11th JAN 2009.

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

Looking for a bright career in the field of Supply chain Management.

I completed my Diploma in Electrical from MS University in year 2007 after that to at present I always working on AutoCAD for different Companies jobs as per them requirement.

I am qualified in operating, pipefitting, welder's helping, laboring, parts, and mechanic helping.

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu., 19 years thorough exposure in Mechanical System of Thermal P

Operations manager with 30 years experience in the mining industry.

Project Manager / Engineer, Private & Public Sector Experienced

Safety Supervisor

Skills: Architectural/Engineering: Well trained and experienced using AutoCAD 2000LT to AutoCAD 2009, PLS-CADD, Microstation V8, Artist Rendering, Illustrations, Freehand Sketches, 2D Modeling, CAD Presentations

Proficient in Document Management System & Secretarial Functions

Mechanical Engineer with 3 years of experience in electrical instalations

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Reviewing the scope of work & technical specifications, checking detail projects schedule plan for construction and delivery of equipment, analyzing the projects progress and monitor the site progress and look after the safety and quality issues and more.

A 34 year old project manager with 14 years experience in mechanical, industrial and commercial projects. 15 years experience in all realms of contract engineering & QA/QC. Overseeing projects up to 36 million dollars. Project estimations.

Experience in Construction of Power House, Highway Roads, High-rise Buildings, Canals, Air Ports, Aero Bridge ,Delhi Metro Rail, Commercial and Residential Multi Story Buildings ,Water Tank, Guest House , Domes. Familiar with ISO 9001,ISO 14001 and Safety systems.

30 year old dynamic electrical power systems engineer available for immediate relocation.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Heavy Equipment Operator

I am looking to get on the job training to become a construction project Manager, I believe once trained I will make an outstanding Manager

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

I have 28 years experience in finance, project control, scheduling and material control working on DoD projects and private sector manufacturing companies in and out of the U.S.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Microsoft project, scheduling, budgeting, estimating, superintendent background

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out