Resume - ECT in Electronic Engineering with 11 years experience in the Electrical Industr...

Misco Jobs

Resume #78358

CONTACT INFORMATION:
View contact information...

ECT in Electronic Engineering with 11 years experience in the Electrical Industry. Experienced and trained on LM2500, LM6000, TM2500s, GE frames T1/T3; PBX; GPS; Digital Switches; Nortel DMS 250/500 certified; Allen Bradley, Siemens, Fanuc, MarkV, MarkVI,Woodward and Bachmann PLCs; COAX cable test and termination; propane back-up generator installation; diesel generator installation; storm restoration both electric and telecom; aligning generators; continuity testing on all electronic/electric equipment; OSHA certified; Tractel trained; and climb tested. Other experience include transmission and distribution training; being First Responder Certified; heating up many different circuits simultaneously; arranging for replacement of transformers; and arranging for relay maintenance on transmission side.

PREVIOUS ASSIGNMENTS

05/08-08/09 GE Energy Rentals Constellation Recommission Salt lake City UT
Night team lead on 5 LM6000 units in a time sensitive environment as Constellation never took the machines off the peaker schedule. Required procedures that were complex with at least two different teams working on the same unit i.e. CMMS relay test and drive end generator bearing seals replaced, work done in one night and unit breaker was closed the next day. All without incident.

11/07-04/08 GE Energy Rentals Waterside Project Stamford CT SOT
Team lead for environmental team on oil spill clean up. After cleaning up approximately 500 gallons of low sulfur diesel got the site in EPA compliance and trained crew on oil spill clean up meeting the new regulations for CT environmental laws.

08/07-11/07 GE Energy Rentals Subyia Project Kuwait City, Kuwiat
Start Up and Commissioning. Provide 3 x TM2500 assembly support under the direction of GE Aero Energy at the Subiya Power Station in Kuwait. Also worked with team that reconfigured Woodward PLC so that machines ignored the 86trip on the diesel fuel allowing machines to run even when fuel was 140F which was the case daily. Now all large generators use the same configuration.

04/07-08/07 GE Energy Rentals Waterside Project Stamford, CT SOT.
Facility consists of three 22.8MW TM2500 units, Baker fuel storage tanks, a demin water trailer, fuel forwarding pumps, filters, and both local and remote control. Responsibilities included serving as lead operator on site, filling out shift logs, running data sheets, assuring demin water quality, and ordering fuel. Duties also included making sure units were ready to start when dispatched, and giving weekly site updates to the site manager.

01/06-01/07 Suzlon/RBG. Wind Turbine Project, OK. Pre-commissioner. Responsibilities included COAX cable test and termination; and installing and heating up 2.1MW plants. Duties also included aligning generators; oiling and greasing all mechanical components; and continuity testing on all electronic/electric equipment., OSHA certified, climb tested, and Tractel trained.

08/03-08/05 Rodger's/Verizon Communications. Various Projects, OH. Field Cell Technician. Responsibilities included figuring out a way to swap back-up power systems on remote sites while hot, saving time as data fill was not needed and microwave dishes were not turned off, now used by most telecom companies; re-cabling most sites; working storm restoration requiring data fill and stayed until site was up and running. Nortel Certified.

02/01-06/03 AEP, Groveport, OH. Dispatcher/Distribution/Transmision. Responsibilities included transmission and distribution training; being First Responder Certified (2003); storm restoration; heating up many different circuits simultaneously; arranging for replacement of transformers; re-arranging distribution phases to get Customers in as soon as possible; arranging for relay maintenance on transmission side; and being error free and safe. Received Presidents award for dispatching the most calls AND not a single reportable safety incident (2002).

01/00-12/00 Qwest, Dublin, OH. Responsibilities included installing T1/T3 and PBX; and performing NOC/SOC work. Was trained and Nortel 250/500 DMS certified.
01/00 DeVry Institute of Technology. Working in the lab while going to school full time. Awarded Phi Theta Kappa in 1999.
1998-1999 Interning at O'Hare International Airport.
EDUCATION

07/98-02/00 DeVry Institute of Technology, Columbus, OH.
ECT GPA 3.45
Awarded PHI THETA KAPPA in 1999
IEEE member since 2000

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 4814)

Go to Search Parameters...

Brief Description

University rate and degree of the master on a specialty «Construction of mines and underground building», specialization – underground - construction. Participated in development and a substantiation of a new way of construction of some sites of the underground in Donetsk region.

Structural Design engineer M. Tech(Structures)having more than 4.0 years experience of designing RCC and Steel Building. Having knowledge of Structural software STAAD PRO etc. Having exposure of Indian & USA based codes like IBC-2000. Having experience in pre-engineering bldg & conventional.

expertise in environmental water policy and economic background. Currently working at the Ministry of Water and Irrigation in Jordan as an advisor and assistant to the Minister Dr Hazim El-Naser.

Respected Sir, Please accept this letter as application for a suitable post in Sales / Marketing in your esteemed organization.

Civil engineer with extensive experience in overseas contract management including West Africa.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

management experience of a wide variety of environmental projects including international HSEMS, development and implementation of environmental management systems, development and provision of audits and training courses.

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction,

Onshore/Offshore Medic,very experienced medical doctor with long years of medical service

Instrument & DCS Specifications datasheets, I/O list preparation, JB,Cable schedule, Logic Diagrams, Wiring Diagrams, Cable and Tray routing, hook-up Drawings, Installation Standards, MTO, Technical Procurement assistance, DCS Detailed Engineering, Project, construction and commissioning activitie

certified QC inspector with 4 plus years of experience, handling all stage inspections of piping, vessals,structruals. welding inspection , familiar with international codes and standards

Highly Experienced Operations Leader with expertise in guiding fundamental growth in the heavy equipment and manufacturing industries.

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

MSc. Civil Engineer, major: Land Surveying; 19 years experience of cadastral (legal) and public utilities and road surveying and topographical mapping

Lead six sigma, APQP, cost savings

Experienced Rigger

Conducting different jobs related training, Conducting Safety Tool Box training, preparing risk assessment and method statements for critical and high risk activities. Inspection of Rigging and Lifting tool and monitoring for safe rigging operations. Giving basic training to employees on fire fighti

Field Machinist/Millwright

Some offshore certificates, good knowledge of construction and offshore trades, strong worker, easy to get along with

Graduated in 2000 with a BSc in Architecture. Since then, I have been involved in the supervision of site works and the execution of architectural finishes in addition to the review of shop drawings for major mixed-use developments and tourist resorts in Egypt.

Scaffolding coordinator-supervisor and Safety manager

Three year full time diplome in Mechanical Engineering and have six year experience in Repair and Maintenance of heavy earth moving equipments

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Inspection of Welding/Painting/Piping/Pipeline Activities

Bachelor of Engineering with over 27 years experience in Process Automation & Control industry.

Computer Knowledge: ArcGIS, MapInfo, Encom-Discover, Plaxis2D, Plaxis 3D foundation, 3D Tunnel, CESAR-LCPC, C-Tunnel, and Geo5 softwares. Qualifications: M. Tech ¡V Rock Engineering & U/g Structures i.e., Geotechnical Engineer, Civil, IIT Delhi

OSHA certified EHS Engineer with 3.5yrs experience

Knowledge in Electronic Document Management Systems and excellent computer skills

Professional Engineer with extensive international experience in chemical/environmental engineering and Construction Management. Very proficient in Project Mangement tools. Doctorate degree in Chemeical Engineering and pursuing PMP certification.

Seven (7) years of experience in project planning & operation/execution management;; Acquire crucial information needed to develop a Baseline Programme; Develop the Baseline Programme using Primavera software; Update the programme and generate progress to graphical chart illustrations;

I ama Graduate Quantity Surveyor currently working in Dubai asa Project Quantity surveyor

Piping & pipeline constructions

Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes plant operations in various industries, which includes offshore and onshore oil & gas design, petrochemical, chemical manufacture, gas processing, and other industries.

I offer a Civil Engineering background specialized in Soil Mechanics and Foundation Engineering with a total of four years of working in various projects in India.

Please Contact ASAP

National sales & marketing rainmaker; F1500 specialty; top five on every sales team.

Skills: Critical thinking, active listening, negotiation, persuasion. Qualifications: Product /Proyect /Marketing Manager

Tax Specialist

15 years Domestic and International Management experience. B.Sc. Mining Engineering.

Civil/Structural Designer with over 12 years professional experience

ECT in Electronic Engineering with 11 years experience in the Electrical Industry. Experienced and trained on LM2500, LM6000, TM2500s, GE frames T1/T3; PBX; GPS; Digital Switches; Nortel DMS 250/500 certified; Allen Bradley, Siemens, Fanuc, MarkV ,MarkVI,Woodward and Bachmann PLCs; COAX cable test a

civil draughtsman with 1yr and 8 mths exp. well experienced in structural steel, fabrication drg, r.c.c drg, architectural drg, working with german eng.. company uhde india pvt ltd as a sub contracter mumbai no.1 construction co, having round abt 100 branches world wide

An experienced Manager with Expertise in the Establishment of Various Client and Industry Specific Databases with an emphasis on Staff Training, Security, Storage, Sorting, Manipulation, Distribution and Archiving of information and data for a diverse variety of clients. Experience gained in infor

Combo, structure, and pipe welding.

I have the experience of complete Electrification of UP Petrochemical Plant and commissioned various Coal Handling Plant in various projects in Fenner India Ltd. I was working in Hyundai engineering and construction company ltd, Korea as Astt. Manager(Electrical) in Abu Dhabi for 19no. 33/11 KV

Construction Engineer, Commissioning Engineer, Instrumentation Designer, Field Engineer, Construction Coordinator, Lead I/E Designer, Instrumentation Design Supervisor, Instrument Engineer, Project Engineer, Pipeline Block Valve Engineer - these are some of my more recent job titles.

SAP, Project Management

I have an N4 qualification in civil engineering, passed two courses in N5, registered two courses in N5, experience in building, road construction, and riggeriing.

I have over 3 years experience in drafting and I am well versed in structural and architectural design. I have considerable experience coordinating and executing projects with engineers and contractors and have a thorough knowledge of drafting processes and procedures. I work well with people and en

AutoCAD, Architectural, Instrumentation Drafting, Civil Drafting, Pipe Drafting, CadWorx

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out