Resume - Currently working as the Service Manager for the CAT dealer in Papua New Guinea,...

Misco Jobs

Resume #78667

CONTACT INFORMATION:
View contact information...

Marital status: Single
Nationality: Australian
Date of Birth: 18/05/1974
Point of hire: Cairns, Queensland
Passport: Current and valid Australian # M 303 7912
Licences Certificates:
Australian QLD drivers licence HR & R # 70291852
OHS Certificates for: Dogman, Forklift and Overhead Crane 5T above.

Training Courses: Hitachi EX2500-5, 3 day course.
Cat. FPO (Fleet Productivity Optimization) 3 Day course, Hastings Deering Brisbane.
Cat. D11R-3, 3day course.
Cat. 300 series Excavator Introduction.
Cat. 785B, 789B, & 793B Introduction.
Cat. 3500 series EUI engines.
Cat. 793B hoist, steering and suspension systems.
Cat. Air-conditioning maintenance and servicing.
CN246 QLD electronics 1.
NM66 Plant electrics 2.
Introduction to electro-pneumatics (EP211), Festo Didatic.
Electro proportional hydraulics (EH611), Festo Didatic.
Hydraulics 1, 2, and 3, Festo Didatic.
Detroit diesel engines familiarisation 53-73 and 92 series
NR21 Automotive Air conditioning, Hedland College.
Fall arrest harnesses and attachment devices, Safety, Rescue sales Aust.
Introduction and Maintenance practices for TITON600 drills, 5 Day course.

Overview Notes:

When working on Caterpillar machines and there systems, I have had exposure to the on board VIMS system on the machines which use it. I also have had exposure to the use of the Caterpillar ET program, both for testing & adjusting and in the fault finding on the machines. I also have used the Caterpillar program SIS and all of its options. When on some PNG sites, I was involved in the designing and implementing of some training programs on the Haul truck systems also in the training of the National tradesmen.

Employment History: November 06 to January 08 Hastings Deering, Ok Tedi Mining Limited, PNG
Quality Assurance Supervisor.
I applied and got the QA Supervisors role at the Tabubil Branch of Hastings Deering PNG at OK Tedi. I transferred to this new position because I wanted to further my career and it was a good opportunity. I look after the QA at the branch of the components and parts that we offer to the customer. I also have been heavily involved with trying to achieve a CC 3 Star rating for the branch which is marked by the World wide system of Contamination Control implemented by CATERPILLAR.

February 06 to November 06 Hastings Deering, Ok Tedi Mining Limited, PNG
Senior Tradesman/ HEF
Employed at the OK Tedi mine where I'm responsible for providing technical support and supervision of the national tradesmen that also work for Hastings Deering. I'm also a part of a team of mechanics that look after warranty claims, breakdowns and servicing of the following equipment.
Equipment:
- Cat 777D, 789B and 789C Haul trucks
- Cat 16G and 16H Graders
- Cat D11N and D11R Dozers
- Cat 834B, 966F, 988B, 992C and 992G Front end Loaders
- Cat 3412Engine Gensets.
January 05 to January 06 Terex Mining, PT Freeport, Indonesia
Technical Advisor and Safety Advisor
I completed my 1 year contract at the Freeport Mine Site in Indonesia, responsible for supplying technical support and supervision to National Mechanics and staff in all situations. I'm also involved heavily with the Safety and environment team, to help lift O&K into a 5 star NOSA rating.

Main duties include:
* Supplying technical assistance on daily mechanical work.
* Preventative maintenance and service organisation.
* Scheduled component change outs.
* Fault diagnostics and troubleshooting.
* Analysing component failures and finding solutions.
* Parts interpretation and organisation.
* Ensuring support equipment and tooling is kept in high condition and completeness.
* Providing appropriate training and onsite mentoring of maintenance systems to National counterpart.
* Day to day supervision of the National workforce.
* Communicating with the Client about maintenance scheduling, accident damage, availability, safety and the supply of up to date information wherever needed.
* Meeting departmental targets for spending and costs by implementing productivity improvements and cost reductions.
* Being a positive influence and motivator, and to be seen as a role model and guide to the work force.
* Ensuring Terex achieves the highest safety, health and environmental performance, and implementing inspections, audits and general housekeeping practices to the workforce whilst striving for the highest NOSA ( 5 star) rating possible.

November 04 to December 04 Placements Aust. Porgera Mine, PNG
Senior Tradesman/HEF
Completion of a short term contract to supervise a major overhaul shutdown of an O&K RH200 shovel at the Porgera Gold Mine in the Enga Province of Papua New Guinea for Placer dome. This was a 4 week contract which our team completed successfully and efficiently before the time frame given.

July04 to October 04 Placements Australia OK Tedi Mine, PNG
Senior Tradesman / Supervisor
Haul truck Reliability Program (RIP)
Object: To raise the mechanical condition of the complete Haul truck fleet of Caterpillar 789B and 789C to a point of optimum mechanical reliability. Complete inspections and repairs of all components and systems. Prepare detailed reports for parts and planned work needed for each individual truck. To correspond all finding's to the Maintenance Management team for OK Tedi Mining.

February04 to July04 Hastings Deering, Mackay, Qld
Field Service/Heavy Equipment Fitter
I was based in the Moranbah area, where I was contracted by Hastings Deering at various sites in the Bowan Basin to perform Machine assemblies, Warranty repair's and both planned and breakdown maintenance of the following.
Equipment:
- Cat 777D, 789B, 789C, 793B and 793C Haul truck's
- Cat 992D, 992G Front end Loader's
- Cat 994 Front end Loader's
- Cat 5130B Excavator's
- Cat 16G, 16H, 24H Grader's
- Cat D10R, D11R Dozer's

May02 to February 04 Placer Dome Asia pacific, Porgera Mine, PNG Senior Tradesman / Supervisor
I was employed full time by PJV, in the Haul truck section where I was responsible for the "hand's on" supervision of the Papua New Guinea tradesmen undertaking the maintenance and repair's of Cat trucks.
Equipment:
- Cat 789B and 789C Haul truck's
- Cat 785B Haul truck's
- Cat 777A and 777B Haul truck's

April 01 to May02 Trainer Industrial Services, Tieri, Qld
Heavy Equipment Fitter
I was contracted to Thiess at the Oaky Creek coal mine, where I was responsible for the maintenance both planned and breakdown of all their machinery. I was also in charge of organising the scheduled servicing of the following.
Equipment:
- Cat 777B, 777D Haul truck's
- Cat 785B and 785C Haul truck's
- Cat 988B, 992C and 992G Front end loader's
- Cat D10R, D11N and D11R Dozer's
- Cat 16G and 16H Graders
- Komatsu PC1000 Excavator
- Komatsu 785-3 Haul truck's

June 00 to April 01 Placement Australia Misima Gold Mine, PNG
Senior Tradesman/Heavy Equipment Fitter
I was contracted at the Misima Gold mine on Misima island, PNG
Where I was responsible for the maintenance and servicing of the following.
Equipment:
- Cat 777B, 785A and 785B Haul truck's
- Cat 16G Grader's
- Cat D7L, D9N and D10N Dozer's
- Cat 824B Wheel Dozer's
- Cat 988B and 992C Front end loader's
- Hitachi EX700 and EX1800 Excavator's

*I also spent a period of four month's in the rebuild section where I repaired / overhauled – Hydraulic pump's, transmission's, final drives and brake group's for all of the equipment mentioned above.

Education History:
Primary School:
Newman Primary School
From 1980 – 1986

High School:
Newman Senior High School
From 1987 – 1991
Graduated from year 12

Apprenticeship:
Apprenticeship "Fitter and Turner"
From 1991 – 1995

Completed Hedland College Apprenticeship Degree
From 1991 – 1994

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4201 to 4250 of 4798)

Go to Search Parameters...

Brief Description

Interested in Industrial Instrumentation Mechanic Apprentice Position: Currently have the following safety courses: H2S Alive, CSTS, First Aid, Confined Space and High Angle training, WHMIS, Firefighting Technical Certificate.

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Looking for senior level assignments in Project Management & Business Development, Health & Safety Management, Human Resources, Learning & Development and Business Startup.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Very good knowdledge in computeers and networking field. Good experience as Document Controller in Oil/Mechanical construction field.

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

Business Administrator with MBA from Oxford, UK

MWD, drilling, construction

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

E&I Materials Coordinator

Quantity measurement by SMM7 in my spreadsheet program, BoQ maker, also Project Monitoring in Quantity and Costing.

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

Camp attendant ( Customers Service) Hard working(drivers abstract 4-5-6-)

Experienced resource manager with teh ability to perform well under pressure. Extensive experience working overseas with multiple nationalities. Quick learner with a diverse work history.

analyst

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

HE Electrician/Crane Operator with 5yrs. experience

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

P&PCM, MBA, B.Arch

Seeking a full-time position in Quality Assurance

Junior GIS Specialist ( Mapinfo pro. - Arc GIS .....).. Geologist

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

Diploma in fire and safety, GOOD ALROUNDER IN HSE FEILD

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

Sr operations Manager

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

Piping, PDS, PDMS, PSDS Designer Over 9 years experience in the field of Mechanical, Piping Engineering Design / Drafting and Construction. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

Graduated in the field of Mechanical Engineering and presently working with one of ADNOC Group of companies as a Maintenance Planner / Scheduler (Mechanical). Have been associated with Oil & Gas sector for more than 4 years. Work experience on CMMS and Primavera skills.

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

Seeking Chemist or Laboratory Technician Position-will relocate

Electrical Engineer

I am an extremely well organized, tedious, and hard working individual. I am well versed in directional drilling and, knowledgable in all aspects of the drilling industry. I am

Research Thesis on ANTENNA/RF

Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.

Plant operations supervisor / trainer, remote overseas locations

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 [ 85 ] 86 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out