Resume - Other than my recent employment my background includes but not limited to: 5+ ye...

Misco Jobs

Resume #78727

CONTACT INFORMATION:
View contact information...

Objective: To obtain a position with an institution that will utilize my skills as well as allow me the opportunity to develop professionally.
Experience: Responsible for the close monitoring and maintaining of equipment, personnel, and products for the purpose of drilling.
Responsible in management of all employees as well as overseeing the training of new employees.
Coordinate with Upper Management in the implementation and operation of Safety needs, Quality, and Production.
Active involvement in Safety Teams, Improvement Teams, and Research and Development Teams.
Experienced in the operation of technically advanced and automated equipment.
Education: University of Phoenix January 2004 - 2005
Attended UOP in pursuit of a degree in business management.
Qualifications: Currently working as a derrickhand for Unit Drilling. My duties consist of safe an efficient handling of equipment, tools, and personnel to complete a variety of jobs ranging from tripping pipe, drilling, monitoring of mud and equipment, to relocating rig. Act as an assistant driller to perform day-to-day functions and maintaining of rig and its equipment.
I have previous experience as a supervisor. As a supervisor my duties consisted of monitoring and maintaining production in a safe and efficient manner with a crew of employees that ranged from five up to fifty-five. I underwent as well as performed advanced technical training. I was also tasked with a goal for process improvement due to my past experience and involvement in six sigma projects.
Prior to supervision I worked at a few other plants in or around the immediate Muskogee, Oklahoma area as a general laborer. My duties included training and safe operation of fork trucks, safe and efficient operation of pneumatic and hydraulic punches, and the inventorying of warehouse as well as shipping needs.
Prior to working in the Muskogee, Oklahoma area I worked on several drilling and work-over rigs. I worked for two major companies, Unit and Nabors. Most of the work I performed was either as a derrick or floor hand. My duties ranged from the mixing and close monitoring of special formulations of mud for drilling purposes, monitoring of down hole activity, monitoring and maintaining of equipment, motors, and supplies, intense safety training, and use of pneumatic and chain driven equipment, and monitoring and maintaining all OSHA environmental and safety standards. I worked as a rig hand on both oil and gas rigs and traveled as far North as Wyoming, as far South as Texas and most everywhere in between.
Employment: April 2007 – Present Unit Drilling Okc, OK
Derrickman
Responsible for the close monitoring and maintaining of drilling fluids and pumps. Work closely and communicate with driller, tool pusher, and mud engineer as well as any and all other personnel. Assists driller in day-to-day activities and function of the rig and its equipment.
Nov. 2006 – March 2007 Ameristar Tulsa, OK
Supervisor
Responsible for managing the production of steel fence panels assembled and welded on a series of Rack able Weld Machines. Supervision of five to fifteen employees. Responsibilities included safety, quality, maintenance and/or assisting maintenance department, efficiency, training, operational improvements, and employee development as well as utilization.
Jan. 2003 – Dec. 2006 Dal Italia Muskogee, OK
Night Shift Supervisor / Manager
Responsible for managing thirteen production lines, consisting of up to fifty-five employees. On the production lines, my responsibilities included safety, productivity, quality, troubleshooting, process improvement, and communication with our internal suppliers and customers. Responsibilities in regard to the associates assigned to the lines included safety, job performance, performance appraisals and corrective action, and training / employee development.
Other Qualifications Basic computer skills, member of emergency response team, completed positive corrective action workshop, completed employee interaction workshop, completed union avoidance and supervisor conduct training, and Research and Development of new products as well as improvements to our existing products.
References: References available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4451 to 4500 of 4805)

Go to Search Parameters...

Brief Description

Around five years of experience in the field of heavy fabrication, planning, estimation, procurement, execution, QA/QC activities, designs and production for EPC projects.

Project Planning and Management, and Procurement / Purchasing

Human Resources, Project Management, Training, Engineering

With over 4 years experience in Quality Control & Assurance also in Inspection application & method. Demonstrated capability of technical expertise to ensure the quality of work accodance with Specification, code or standard, and to make sure the schedule of work on time.

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

QA/QC Inspector cum Engineer

Process/Electronic Technician

MSc in Management Finance,BS(Hons) in Business Administration, ACCA, CAT

Early career Supply Chain Management & Project Management Graduate

Other than my recent employment my background includes but not limited to: 5+ years in drilling and work over rig experience, I’ve spent at least 1 or more years working or training in every position, 1 year as floor and motorman, 3 years as derrickman

I am a target oriented, highly motivated, hard working and communicative person, I have Leadership skill, I am speak English. In addition to the above qualification, I am also familiar with computer program and have the ability to work in team. I have an Experience In belt system maintenance and equ

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

I've worked the oilfields for a very long time off and on, I know pretty much everything there is to know, I'm a leader and do the best I can do

I am a civil engineer designer with a multi - disciplinary consultancy. I am involved in all aspects of delivering flood alleviation schemes including design of flood defences. I have a BEng(hons) from an accredited university and am finishing my MSc part - time. I also have 2 years of site exp.

Documentation Specialist

My experience in biological science ranges from working independently to working for, State, Federal Agencies and Environmental Companies. This experience has provided me with valuable skills in conducting field research, data collection and analysis on many threatened and endangered species.

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Graduate chemical engineer (The University of Queensland), hardworking, quick learner and eager to learn with excellent communication and project & time management skills.

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

NDT

Am a hard working and reliable person who displays a high standard of care and customer service, a person who is highly active, self motivated, keen to succeed and eager to learn new skills. Am good team worker and I know how to prioritise my work.

Administration, Marketing, Business Development, Operations & Computers

Corrosion, Cathodic Protection, Quality Control, Metallurgy

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Graduate in chemical and electrochemical engineering one of the unique course offered by central electrochemical research institute in elecrochemical science , having professional expertise in various electrochemical area with CGP of 7.934 looking for a challenging career in reputed organisation .

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Very good analytical and project management skill. Do multi tasking and road warrior.

BTech Electronics and Communication Engineer having 4 years experience in Operation and maintenance of Power Substation.Also have Post Graduate Diploma in Advanced Computing.Knowledge of PLC Programming and Applications and SCADA Programming and Applications.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Mechanical Engineer (Recent Graduate)

Good analytical and communication skills. Can communicate fluently in both English and Tamil. Willing to learn and adapt to new challenges. Self-motivated, dynamic, quick learner and team player.

Instrument Engineer Mark V, Mark VIe, Siemens S7, Bently Nevada , CCC,CompeX.

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

Motivated scientist looking to bring new and fresh ideas to current environmental projects.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Prepare MTO, BOM, electrical installation, electrical testing, E & I pre commisioning and commisioning

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

B.E. Mechanical. Five plus years of experience in Project Management, Construction Management, Logistics, Budgeting, Cost Estimation, Materials Management, Resource Planning in Construction sector.

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

INSTRUMENTATION ENGINEER

Planning, Scheduling, Primavera, Risk management, Pertmaster

Heavy Eqiupment Operator,Construction,

A comprehensive billing system for about 62 hired Heavy machinery's was successfully implemented.

Human Resources Generalist

B2B Marketing, Product Development, Dealer Management, Market Research

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 [ 90 ] 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out