Resume - Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC ac...

Misco Jobs

Resume #78983

CONTACT INFORMATION:
View contact information...

Employment

16/06/2008 – Present Granite International (GSI), Central Europe

I am currently hired via GSI and utilised on various GE owned businesses, predominantly Aero. I am presently assigned to Installation & Commissioning on-site training of GE's LM6000 packages with the prospect of becoming a TA for GE installations worldwide. I previously spent 6 months in GE Energy service workshops based in Rheden, The Netherlands. Though relatively new to working with the internal components I gained knowledge and experience whilst applying my skills working on all aspects of their LM6000 Gas Turbines. From time to time I also assist GE Water Technologies on their mobile water treatment purification trailers as an Operations & Maintenance Technician. As an experienced tradesman and Gas Turbine operator, I am considered for contracts with GE Energy Rentals to further provide skilled labor on both Engine Maintenance Support, and Operations & Maintenance of their TM2500 Mobile Power Plant.

01/04/2008 – 10/05/2008 NRG Global, Pakistan

Working self employed I was utilised in planned maintenance of seven General Electric LM2500 Gas Generators. Having previous experience of the site and equipment on the original installation and the operations, I was approached to assist Aero representatives in carrying out removal of engine, top casing and blade changes, as well as hot sections and nozzle changes. In between maintenance periods I was also required as an Operations and Maintenance Technician to ease pressure from longer term site staff.

13/09/2007 – 31/03/2008 Granite International (GSI), Central Europe

I was recruited predominantly to work alongside GE Aero Derivatives on European contracts. I have assisted Aero in the removal of engines (and in cases the Power Turbine) from the package for major overhaul. Re-installation & alignment, and pre commissioning of land mounted units, generally LM2500. Having an appreciation and experience of Operations and Maintenance of their TM2500 power plant as a package for GE Energy Rentals, I gained further experience solely on the LM2500 Gas Generator itself. Working to GE guidelines and procedures, fulfilling Aero FSR expectations, I now have a greater understanding of Engines and the strict mechanical work required, particularly on installs.

To become more flexible for Granite I accepted a request to attend classroom training for GE Water Technologies. I then worked on operations and maintenance within Europe on GE Mobile Water Treatment plants, providing various levels of purified water to suit client specification based upon plant requirements. I have gained further knowledge of chemistry and the direct use in water treatment. I have obtained operations and maintenance experience of mobile plant including 6 stage Filtration Systems, Reverse Osmosis, De-Aerators and DI Trailers and their effectiveness and efficiency within the water purification and treatment industry.

08/06/2007 – 03/08/2007 NRG Global, Kuwait

Installation Supervisor: Working Self Employed as PB Globetech Ltd, however sub-contracted to TC Power via NRG Global on a rotating shift basis. Working as a team member my role is to oversee and assist in a new installation of six General Electric LM6000 gas turbine units. Responsibilities include liaising with client on a daily basis regarding progress, safety concerns if applicable and relevant issues. Accountable to Project and Installation Managers I am supervising a team of ex-patriots, and local labor of up to 20 personnel.
Additionally
* Responsible for install progress and updates
* Responsible for implementing health and safety measures
* Ensuring all mechanical lift machinery are operational and available
* Progression of installation and commissioning movements
* Identification and rectification of problems

08/12/2006 – 27/05/2007 NRG Global, Pakistan

Mechanical Technician/Turbine Operator: Working Self Employed however subcontracted to General Electric Energy Rentals via NRG Global I was part of a team responsible for the installation, operation and maintenance of seven TM2500 mobile gas generators utilised on a WAPDA Power Station in Pakistan.
Additionally:
* Self motivated mechanical technician and turbine operator
* Key team member within specialist install team
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Condition monitoring of package machinery
* Contribution towards operator training of local personnel and ex patriots
* Familiar with relative local and remote HMI computer operations software
* Team empowerment and inspiration. Also able to contribute greatly on own initiative

28/04/2006 – 01/12/2006 NRG Global, South Africa

Mechanical Lead/Turbine Operator: Operating via NRG Global I was subcontracted to General Electric Energy Rentals for a period of seven months. I was responsible for the installation, operation and de-mobilisation of three TM2500 mobile gas generators based on a PetroSA Oil Refinery.
Additionally:
* Contribution towards achieving install deadlines as a key member
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Ensured effective maintenance of relative machinery
* Ensured client dispatch requirements were fulfilled
* Maintaining a very good client relationship
* Appointed leading mechanical hand relative to de-mobilisation
* Achieved record de-mobilisation target, whilst ensuring health and safety requirements were the optimum goal throughout

01/09/2004 – 23/02/2006 IPM Industries, Thornaby

Service Engineer: Employed on a permanent basis to overhaul client pumping equipment, whether on site or in the IPM workshops. When necessary I was also subcontracted out to local and national refineries, steelmakers and chemical industries. I was also utilised overseas installing and demobilising mobile power generation equipment for General Electric.
Additionally:
* Rotating equipment specialist
* Competent in maintaining heavy plant machinery and equipment
* Rotalign Pro laser alignment technician
* Maintaining good client relationship via personal conduct
* Health and safety awareness

02/04/2001 – 27/08/2004 Ceetak Engineering Ltd, Middlesbrough

Service Engineer: Employed on a permanent basis to overhaul a wide range of client pumping apparatus and rotating equipment both on site and workshop based. Responsibilities included quotations, recommendations and sourcing of spares and replacement units. Within this role I was required to assist the workshop manager and area sales engineer by taking on some of their duties on a regular basis.
Additionally:
* Rotating equipment specialist
* Optiline laser alignment technician
* Administration
* Knowledge of working in petrochemical, chemical, oil & gas and pharmaceutical industries
* Health and safety awareness o
* Management of workshop and stores

16/11/1998 – 30/03/2001 SLD Pumps Ltd, Chester le Street

Diesel Pump Fitter: Employed on a permanent basis to overhaul a range of diesel and electric driven Godwin self priming pump sets within the company fleet. Based in the central repair centre I was responsible for the repair/overhaul for a range of diesel engines, self priming pumps, compressors and vacuum pumps, as well as rectifying any chassis damage. All serviced pump sets were performance tested in house prior to release from the centre.
Additionally:
* Rotating equipment specialist
* Manufacture of 12/24v engine wiring looms
* Knowledge of Volvo, Cummings, Perkins, Ford and Lister-Petter diesel engines
* Manufacture of brackets and steelwork
* Occasional management of stores and stock levels
* Compliance with company and OEM standards

16/06/1992 – 13/11/1998 Clydesdale Forge Co, Hartlepool

Mechanical Technician: I was initially recruited as an apprentice on a permanent basis, and retained as a fully qualified Technician following completion of my apprenticeship. Responsible for repairs and maintenance of all company machinery, and ensuring all plant equipment was kept in good operating condition. I was selected to be part of a product improvement team for my mechanical input and system modification suggestions. I also set up a PC controlled routine maintenance schedule to aid prolonging component life and reducing machine downtimes.
Additionally:
* Knowledge and competency in maintaining a range of forging and stamping machinery
* Control of PC assisted routine maintenance
* Knowledge of pumps & valves, hydraulics & pneumatic systems, brake & clutch systems, cams and followers
* Enthusiastic team player

Skills

* Capable, competent, reliable and responsible
* Ability to work on own initiative or as a team member
* Methodical and able to apply fault finding techniques
* Very good communication and administration skills
* Trained alignment technician
* Computer literate
* Welding and fabrication
* Basic electrical skills
* Basic lathe skills

Education

1987 – 1992 The English Martyrs Comprehensive School, Hartlepool
(GCSE'S) Mathematics, Modular Science, Art and Design, Graphic Design, English Language,
English Literature, History, French, Religious Studies
1992 – 1993 Stockton & Billingham Technical College, Stockton
BTEC First Certificate in Engineering
1993 – 1995 Hartlepool College of Further Education, Hartlepool
BTEC National Certificate in Mechanical & Production Engineering
1995 – 1997 Hartlepool College of Further Education, Hartlepool
BTEC Higher National Certificate in Mechanical & Production Engineering

Training Courses

Jun 1993 Entra (Engineering Training Authority)
NVQ Level 1 & 2 Mechanical Maintenance Skills
Jan 1996 Clydesdale Forge Engineering Company
Slinging and Pendant Controlled Overhead Crane Driving
Oct 1996 Entra (Engineering Training Authority)
NVQ Level 3 Engineering Maintenance - Mechanical
Oct 1999 SLD Pumps Limited
Counterbalance Fork Lift Truck Operator Certificate
Sep 2001 Ceetak Engineering Limited
Glandless Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Centrifugal Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Vacuum Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Progressive Cavity & Positive Displacement Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Mechanical Seal Maintenance Competency Training
Jun 2002 Pruftechnik AG
Optiline Laser Alignment Training (Uncertified)
July 2002 AES Seal Plc
Mechanical Seal & Systems Training Course
Sep 2002 AES Seal Plc
AES Seal Correspondence Course – Bronze Award
Jun 2003 Pruftecknik AG
Vibrotech Condition Monitoring Training (Uncertified)
Sep 2004 IPM Industries – In House
Rotalign Pro Laser Alignment Training (Uncertified)
Jun 2006 General Electric – Non certificated EHS Training in accordance with GE policy (NRG)
May 2007 NRG Global – In House
Rotalign Ultra Laser Alignment Training (Uncertified)
Sep 2007 General Electric – Non certificated EHS Training in accordance with GE policy (GSI)
Nov 2007 General Electric – Non certificated mobile flow school, GE Water (GSI)

Hobbies

* Motorbikes
* Travel
* Cycling
* Running

References

* Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3701 to 3750 of 4775)

Go to Search Parameters...

Brief Description

B.Sc. Mechanical Engineer, having Fifteen years of technical and HSE experience including three years in UAE as HSE Manager. Presently working with Eni Pakistan Oil and Gas E & P Company as HSE Advisor (Projects).

Professional experience in QC Document Control, Project Cost Reporting, Materials Control, Logistics, Administration, NDT Supervision, NDT reporting, QA/QC etc. with Oil & Gas and Marine (Onshore & Offshore).

A Chemical Engineer with fifteen years of experience in design, construction and management of capital projects related to the Oil and Gas industries. Offering skill in all phases of capital project management, to include planning, design, budgeting, scheduling, safety/HAZOP, team leadership

Working as Sr. Document Controller

I have been working extensively with M/s. Saudi Wiemer & Trachte Ltd., Riyadh for ten (10) years in their Tendering & Procurement Dept. The company has given me an experience and a clear edge over my professional peers.

audits – compiling safety meeting data – safety meeting presentation – worker’s Three (3) years experience in Safety – accident/incident reports – safety compensation – drafting Emergency and Fire Prevention plans – OSHA regulations and logs Three (3) years experience in Purchasing/Warehousing.

I am an experienced welder/fitter.

Mechanical Engieer

M.Sc, B.Sc with 2+ years of experience

Software Skills o AutoCAD 2008 o Autodesk Inventor 2008 o Tribon M3- Pipe modelling, Structure modelling, Design Manager o Rhinoceros 4.0 Nurbs modeling o Solidworks o Primavera Project Management P3 o MS Office Suite - Word, Excel, Power Point, Outlook, Project

MAINTENANCE ENGINEER, GAS TURBINE, FITTER

Recent Graduate. Materials/Metallurgical Engineer, Some Project Managment Experience in a Consulting Evironment. Looking for Work in Britich Columbia.

3 yrs. Diploma & 7 yrs Exp. with certificate of Electrical Engg.

Have background in power systems and power electronics as well as variable speed drive technology and control systems. I have studied Reliability engineering and have also studied the fundamentals of engineering management and project management.

Material Manager

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

I’m a mechanical engineer with more than fifteen years of experience in project engineering, project management, procurement and maintenance management. I’m a team oriented person with excellent communication skills and strong leadership.

SECURITY MANAGER COORDINATOR SAFETY

I am not looking for just another pay cheque. I enjoy my work and am proud of my profession. Your company providing an excellent services. I share the values that make this possible, which should enable me to fit in and complement the team.

Oil & Gas International Sales and Business Development Manager

Looking for a Job as Project Manager or Proposals Manager in a reputed company

Hard Worker, Honest, Trust, Finish objectives in time and in proper way

I am a motivated individual, who is willing to learn new skills to develop on both a personal and professional level.

I'm a 23 years old guy done with his Electronics BS degree with minor study of Biomedical engineering and a 3years experience in this field and I'm going to graduate with my second BS degree in Electrical engineering in February 2008.. I'm looking to be a part of a team in good company..

Extensive experience & strong, decisive, and profitable leadership in utility & pipeline design,construction & maintenance management. Keen financial, negotiating, and strategic planning performance. Consistent and measurable gains in operations, safety, quality, efficiency and productivity.

Government Contracts Financial Executive

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

Seeking business development position with multinational organization involved with turnkey type projects where my background of over 16 years progressive oil and gas industry experience will provide value creation to grow business.

I will be completeing my degree in June 2005. Geoscience skills include slope stability assessment, geological and geomorphological mapping, risk, hazard and vulnerability assessment, geotechnics, seismology, rock engineering.

Fresher with diploma&engineering and with good knowledge in design and design softwares like CATIA,UG,PRO-E

I have done a 4year degree course (B.Tech) in Mechanical Engineering from an autonomous institute. My software knowledge is eqipped with Auto Cad and Pro-E Softwares.My communication skills are excellent.

Autocad,Primavera

I have several years of experience in a variety of fields including office administration, customer service and internal sales management. I also have had experience in using a cash register/taking payments and dealing with customers face to face.

Five years customer care & documentation executive experience in Freight Forwarding Company. Results driven seasoned professional with extensive experience in handling shipments. Culturally sensitive and a team player relative to other departments across an organization

Motivated design engineer, with high communication and management skills, results driven with experience in team work and working in various environments.

A Certified PMP and a Civil Engineer with Experience as a Project Controls Engineer in International Projects in the Middle East with experience in Primavera Project Planner 3.1, Expedition, P3e 4.1 as well as using Database Mgmt Software such as Access. In addition to my site experience

MIG) Gas Metal Arc Welding, (TIG) Gas Tungsten Arc Welding, (SMAW) Shielded Metal Arc Welding “Stick”, OXY-ACETALENE Welding and cutting. I have also been trained in Pipe Welding, and have an extensive knowledge of Ferrous and Non-Ferrous metals along with numerous skills in metal fabrication.

over 14 years of Quality Control and Assurance within the Construction and Facilities Maintenance field. Providing leadership and Quality Control in a variety of New and or expanding projects ranging from military and civilian aircraft runways, slip form, facilities maintenance, and industrial plant

diesel engine mechanic, rig mechanic , generator mechanic

Engineering Management/Research Consulting Position—where my environmental, health and safety engineering research expertise, industrial engineering competencies, effective communication skills, strong leadership qualities, and potential to conceptualize and implement improvement initiatives

Project Manager / Product Manager with excellent people skills

WELDING ENGINEERING, WELDING INSPECTIONS, MANAGEMENT, QA/QC, NDT INSPECTION

4 years experience in Environment Health & Safety Management and Team Management

B.Tech,Instrumentation ,Design Engineering, Erection and Commissioning in the Oil & Gas field for Onshore and Offshore Process complex /Platform and Drilling rigs And FPSO

Experienced financial analyst with over 15 years of domestic and international integrated oil and gas company experience covering a broad spectrum of activity. Proven expertise in the areas of Finance, Accounting, Project Management, Materials Management, Systems implementations (SAP/R3).

Proactive management professional with solid business/technical leadership in the oil and gas area. Team builder and problem solver with proven track record of invigorating organizations. Has international contacts, exper. in complex contract negotiations, project planing-design-financing.management

25 years mining and heavy industrial , power generation,technical trainer,maintenaince supervision superintendent roles, 6 years expat work in 4 countrys ,extensive exposure to MARC's and dealer systems,all mining equipment covered diesel and electric

Bilingual with excellent organisational, communication and interpersonal skills, acquired whilst working in a Project environment in the Corporate Offices of Italy’s largest oil and gas Company. Comfortable in positions of responsibility and equally confident working on own initiative or in team

Strong Experience in the area of Safety (Health, Safety & Environment). Coordinating with other construction departments on HSE related issues. Consistent performance with ability to take up responsibility and deliver results.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 [ 75 ] 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out