Resume - BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering ...

Misco Jobs

Resume #79065

CONTACT INFORMATION:
View contact information...

January, 2009

Age: 49 Status: Single
Health: Excellent, no physical limitations
Nationality: USA

Work focus: Work offshore/onshore overseas in facilities engineering, operations, planning, process simulation, troubleshooting, analyzing, designing, scoping, cost/economic/investment analysis for oil/gas/pipeline surface production/processing facilities. This could be in the areas of providing engineering services with a tech support group or as an on-site senior oil/gas facility engineer. Available Feb, 2009.

Career: 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Have had extensive experience both in central planning and engineering services tech support as well as on-site facilities operation and start-up/commissioning. Excellent oral/written communication.

Placements: On-site Oil/Gas Production/Process Engr., Facilities Planning Engr. (Alaska and Saudi Arabia); Sr. Project Commissioning Engr.; Sr. Production Operations Engr, Staff Process Engr; Field Production Engr; Offshore Operations Engr.

Education: BS Chemical Engineer
University of New Mexico
Grad. December 1981 (top 10% of class)

Professional Training/Courses
Amoco Oil Co: Surface Facilities Design, Petroleum Engineering
Fire Training, Cold Water Survival
ARCO Alaska: Oil & Gas Surface Facilities Operation
Rotating Equipment & Compressors
Production Technology, Technical Writing
Corrosion Control, Hazard Analysis
Saudi Aramco: Gas Processing Technology
PRO II, HYSIM Steady State Simulation
Red Cross CPR/First Aide

Personal: Certified diver, softball, golf, cooking, member of Mensa

Detailed Experience:

Saudi Aramco (7 years)

Position: Staff Facilities Planning Engr, Gas/Producing/Distribution/Termina
Location: Dhahran, Saudi Arabia
Duties: Long range facility planning and project development, project cost/economic analysis, new facility equipment scoping/sizing, engineering studies, technical support of contract engineering services, oil/gas process and pipeline simulation, design review, project budgeting/funding administration.

Position: Sr. Process Commissioning Engr
Location: Safaniya Onshore Gas/Oil Separation Plant (GOSP), Eastern Saudi Arabia
Duties: Provide technical support for construction/commissioning 1,300 MBD wet crude handling facility with DCS. Develop/oversee hot tap installation packages and general construction inspection. Conduct facility design/process review, plant start-up, and develop/conduct new plant performance testing. Collaborate with project/contract management. Develop young Saudi Engrs.

Position: Safaniya Onshore/Offshore GOSP Operations Engr
Location: Safaniya Onshore GOSP, Eastern Saudi Arabia
Duties: On-site Operations Engr. for heavy crude GOSP (1,600 MBD) and medium crude GOSP (1,100 MBD). Processes include staged separation, desalting, gas compression, crude shipping, and DCS control. Coordinate operation/maintenance activities with offshore producing operations.

ARCO Alaska (5 years)

Position: GOSP (Flow Station 3) Sr. Facility Operations Engr
Location: Prudhoe Bay, Alaska (7 days on/7 days off)
Duties: On-site Operations Engr. for one of three 250 MBD GOSP's and associated drill sites in east Prudhoe Bay field. Processes include staged separation, gas compression and dehydration, crude shipping, water injection, gas injection/gas lift, well testing, and drill site operations support.

Position: Staff Facilities Planning Engr.
Location: Anchorage, Alaska
Duties: Planning, process, economic analysis, and project engr. for upgrading gas dehydration facilities for all ARCO GOSP's in Prudhoe Bay and Kuparuk Field. Developed economics and gained project approval. Project included retrofitting/modifying trayed glycol dehydration columns and regeneration strippers with structured packing to achieve -70oF dew point gas. Oversaw pilot plant testing, vendor selection, and project construction/commissioning/performance testing.

Position: Staff Facility Planning Engr.
Location: Anchorage, Alaska
Duties: Provide technical support for all ARCO Alaska oil/gas/pipeline operating facilities including; engineering studies, economic analysis, process simulation, troubleshooting, performance testing, process optimization, etc.

AMOCO Oil Co. (2 years)

Position: Production Engr, Elk Basin
Location: Powell, Wyoming
Duties: Oversaw Elk basin field production operations including; on-site producing well logging/cementing/perforating operations, well testing, designing workovers, and writing the annual field review report.

Position: Offshore Facility Engr, Cook Inlet
Location: Anchorage, Alaska
Duties: Provide process and mechanical engineering support for four offshore production platforms in Cook Inlet. Standard onshore and offshore oil production facilities including cathodic and impressed current corrosion protection systems.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2651 to 2700 of 4805)

Go to Search Parameters...

Brief Description

Over 15 Years of rich experience in Engineering Procurement & Construction projects for Oil , Gas , Petrochemical , Power Plant & Ports .

Contact Details Personal Profile Professional Profile Academic Qualifications Non-Academic Details Computer Abilities Work History Detailed Working Experience.

Mechanical project engineer with 3 year experance

Document Controller, 3 years Experience with Professional Degree

COATING INSPECTOR CV

Instrument Supervisor

Over 20 yrs of exp in upstream O&G. 7yrs offshore, from construction of offshore platforms, hook up and commissioning through to start up and steady state production. Strong HSE focus (previous role in charge of offshore platform), strong hardware completion and handover exp. LNG experience.

Instrument Engineer

AutoCAD/ Microstation Drafter

CAD CAM PLM TECHNICAL SUPPORT

I am Electrical Diploma holder. I have 10 Years of professional experience in Drafting in Building Service like Electrical, Fire Detecting, And Public Address System. Also Familiar with Indian standards as well as international codes such as BS, NEC, IEE Regulations & NFPA for Building Services.

An enthusiastic HSE Advisor with a background in the Oil & Gas and Major Construction Industry.

Significant experience gained in the welding and fabrication industry. Working Petro chemical plants, oil and gas, pipeline & fabrication yards in Middle East (Kingdom of Saudi Arabia) and India. Welding Inspector (3 Years and 6 months), taking full responsibility for production welds made on site.

Ten years experience in all areas of camp operations management. Expertise in the following areas: Housing Food Service Maintenance Contractor Compliance Operations Security Experienced in civilian construction, oil & gas and military base support contracts.

- Civil Engineer with 4 years construction management experience. - Looking for project management or structural/civil engineering position. - Willing to relocate. - Hard working, devoted employee with leadership skills. Looking to increase experience & exposure in the industry.

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

I HAVE BEEN INVOLVED WITH EQUIPMENT MAINTAINENCE ALL OF MY LIFE,AG/CONST BACKROUND 10 YEARS HEAVY EQUIPMENT EXPIERENCE 6 AS A FIELD TECH. LOOKING FOR AN OVERSEAS OPP.

Over nine years experience in the Measurement and Control Field. Overseas experience in China. Experienced in construction, commissioning and field engineering, mainly in the pharmaceutical, semiconductor, film manufacturing and food & beverage industries.

OBJECTIVE To obtain a Full Time Position as a Project Manager, Construction Project Manager, Site Manager, or Site Superintendent in the Wireless Industry.

Respected sir, this is an reference I read it in google.com. Sir, this is to just let know about the vacancy details in your esteemed organisation as I am a BE(Mechanical).

Have 4 years of experience in design and construction of Highways, Pre-Stressed concrete bridges and residential and industrial buildings.

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

Completed 1st Year MBA from SV University, Tirupati (Distance Mode) Pursuing 2nd Year MBA-HR.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Where my experience, Education,training and good work habits will be an asset to your company.

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

Plant Inspector or Quality Assurance/Control Inspector API 510/ AWS CWI

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

Senior piping designer

Twenty plus years managing large scale telecom and construction projects

Construction managemnt, contract managment, quantity surveying, planning, schduling, cost analysis and control, finance managment, resource managment, computer maintinance,

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

A suitable position in the area of electrical schematic drawings and designing of electrical panel boards, cable layouts, etc. and/or designing of electronic circuit layout and PCB by using CAD software .

Mechanical Engineer

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

I know I could be a good asset to your company. I have 9 years of experience working in commercial, industrial. I have skills in various fields such as electronics, PLC work, carpentry, masonary, concrete work, mechanics, welding, and fabrication.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Experice engineer with project engineering and project managemnt

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

Electrician who posseses a wide variety of electrical knowledge

19 years of International Project Management experience, excellent communication skills at all levels. Highly organized dedicated and reliable employee, thrives under pressure. Very good computer skills, user of Microsoft Office and various accounting software SAGE, JDE, Tally & Enterprise

Work in construction warehouse , Construction on construction site , Forklift and other heawy machine operator , Supervising of building site , Control and checking construction material ( strickt and sawing construction material spendind ) etc.

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Transmission Engineer- power system circuit and substation design & planning

Masters in Business Administration (with specialization in Finance and Human resources) Hyderabad, A.P, India.

First Prev 51 52 53 [ 54 ] 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out