Resume - Safety Supervisor

Misco Jobs

Resume #79174

CONTACT INFORMATION:
View contact information...

EDUCATION & TRAINING

Lamar University, Beaumont
Bachelor of Science in Criminal Justice Graduated: December 1990
Minor: Business Administration
Associate of Science in Law Enforcement

Texas Southern University, Houston, Texas
Thurgood Marshall School of Law June 1992 – May 1993

EMPLOYMENT HISTORY

Jacobs Engineering Group, Inc. February 2008 - Present
Safety Supervisor
Exxon Mobil ESP Project - Torrance, CA
Longhorn II Project Total Petrochemical - La Porte, TX
* Safety Supervision for the 700 million dollar project providing safety of iron works, civil excavation, insulation, electrical and metal work.
* Responsible for assembling all hands for weekly meetings and creating the weekly meeting agenda.
* Worked as supervisor over seven sub-contractors to act as a go between when safety issues arised.
* Also responsible for conducting required orientation meetings.
* Investigation of on-site incidents and the performance of site safety checks and completion of Safety Reports.
* Conducted Safety Sampling and Audits to develop static's to pin point potential safety issues.
* Safe work for 1,490,000 man hours without an OSHA recordable or lost time injury.
* Reduced the number of first aids form a high of 146 in June of 2008 down to a year low of 3 for the months of September and October of 2008.
* Planned a safe perimeter for the move of two large units.
* Consulted with Exxon/Mobil Fire and Safety to execute a ventilation plan for the confined space work conducted inside the structures.
* Employed the Exxon/Mobil Lock Out Tag Out procedure to insure that proper containment of power was achived each project.
* Worked to provide a hydration plan for personell to avoid heat stress or heat stroke, which included water, cool down stations, and ice pops during afternoon breaks.
* Assisted with the Jacobs Orientation which was provided for contractors Longhorn II Project Total Petrochemical La Porte Texas.
* My responsibilities are performing daily Safe Plan of Action (SPA's) audits, recording safety observations, conducting daily safety meetings, and promoting/monitoring a behavioral safety process.
* I also investigated incidents and complete the investigation reports for the project.
* Project peak workforce of 900 employees on two shifts, I supported the dayshift totaling 700 employees.
* Project scope of work was to revamp 7 different units to increase efficiency and production for the facility.

Brock Services December 2006 – February 2008
Site Safety Coordinator - Beaumont, TX,
Chevron Project - Pascagoula, MS

* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* I also oversaw audits in order to proactively identify and resolve issues.
* Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training.
* I worked closely with a special safety alliance call Contractor Safety Team (CST).
* The emphasis was on unity among the safety personnel at this facility.
* All members were required to attend a plant sponsored training to be a part of the CST.
* Once accepted members were expected to attend a safety walk thru twice a week, and a full facility walk once a month.
* The team worked to proactively erase the unseen boundaries that exist between the craft personnel and the safety professionals.
* Theses efforts produced an atmosphere of cooperation and helped to increase overall safety while reducing incidents and injuries.
* Conducted monthly urinalysis and took personnel to clinic as needed.
* Provided safe evacuation practices and procedures as well as doing a head count to ensure all personnel were accounted for during this period.
* All efforts were given to ensure that the client and company relationship was whole because of a safe work environment.

Brock Services December 2006 –Nov 2007
Site Safety Coordinator - Beaumont, TX,
Huntsman Project - Port Arthur, TX
* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* I also oversaw audits in order to proactively identify and resolve issues. Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training.
* Under my, supervision the safety staff which included 8-10 technicians working two shifts was able to achieve the million hour plus mile stone of working without a loss time injury.
* This was a multi-phased project which started as a repair from storm damage due to hurricane Rita this took in the 5 units at this facility.
* The safety group took an active part to ensure that each employee was able to work in the safest environment that was available under the conditions that were at hand.
* Oversaw the lock out process for the cooling fans, this involved locking out both the MCC, and the actual fan.
* All of the work on these fans did involve confined space entry procedure along with these I also oversaw confined space entries for the super- heaters.
* Made the sure that all tower entries were NORM tested prior to entry and that all fresh air and breathing air requirements were adhered to.
* Responsible for the investigation of any incident, injury or conflict involving company personnel, also I was in charge of the monthly random urinalysis which would involve 150 samples.
* Transported personnel to and from the clinic as the situation dictated. Completed all required monthly reports, and I worked to ensure that company and client relations remained viable by providing a safe work record for both.

CAM Environmental Health and Safety June 2003 – November 2006
Safety Technician - Nederland, TX

* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* Oversaw audits in order to proactively identify and resolve issues.
* Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training.
* The bulk of my duties involved hands on approach to providing a secure working area for the personnel working in the areas there was heavy emphasis given to respiratory PPE and additional outer garments to maximize the effectiveness of the safety process.
* Goals set were to help the staff maintain peak health.
* This involved the daily inspection of the equipment used by the workers to ensure all safety procedures were followed properly for both cleaning and storage

Evans Environmental and Geological January 2002 – June 2003
* Field Safety Tech Asbestos Supervisor and Inspector – Port St. Luci, FL; Gulf Port, MS; New Orleans and Lake Charles, LA; Pascagoula, MS Field Safety Tech Asbestos Supervisor and Inspector.
* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* Oversaw audits in order to proactively identify and resolve issues.
* Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training.
Envirotest April 2001 – December 2001
Environmental Consultant and Remediation Demolition and Rebuild Supervisor - Houston, TX

* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* Oversaw audits in order to proactively identify and resolve issues.
* Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training

Restored Living Consultants January 2000 – February 2001
Remediation Sales Consultant Estimator and Project Supervisor - Houston, TX

* Formed a remediation business and set company objectives, made projections for expected receivables.
* Developed business plan to meet objectives of the mold extraction industry.
* Identified target through the business to business relationship adjusters insurance.
* Establish a certified vendor relationship with major insurance carriers.
* Conducted home inspections for clients and explained the growth process of mold.
* Consulted with clients by aiding them in the homeowners insurance claims process for a water loss.
* Wrote remediation proposals and presented them to clients and insurance adjusters.
* Developed project plan that would achieve proper abatement and successful air clearance results.
* Daily assignment dispatch of work crews and on site walk through with foreman for new projects
* Provide cleaning and climate controlled for storage of personal property of residents.
* Conducted pre and final inspections of containments and prior to air post air test.
* Completed 'financial transactions with homeowners by collecting payment for services preformed.

EMPLOYMENT HISTORY (con't)

Advanced Remediation Services February 1999 – December 1999
Partner Senior Remediation Sales Consultant, Estimator and Project Supervisor - Houston, TX

* Formed a remediation business and set company objectives, made projections for expected receivables.
* Developed business plan to meet objectives of the mold extraction industry.
* Identified target through the business to business relationship adjusters insurance.
* Establish a certified vendor relationship with major insurance carriers.
* Conducted home inspections for clients and explained the growth process of mold.
* Consulted with clients by aiding them in the homeowners insurance claims process for a water loss.
* Wrote remediation proposals and presented them to clients and insurance adjusters.
* Developed project plan that would achieve proper abatement and successful air clearance results.
* Daily assignment dispatch of work crews and on site walk through with foreman for new projects
* Provide cleaning and climate controlled for storage of personal property of residents.
* Conducted pre and final inspections of containments and prior to air post air test.
* Completed 'financial transactions with homeowners by collecting payment for services preformed.

CONSTRUCTION MANAGEMENT
* Safety supervision of iron works, civil excavation, insulation and metal work.
* Conducted orientation meetings, and weekly all-hands and safety meetings for each trade under Brock Services at the plant.
* Investigated on-site incidents, recorded the performance of site safety checks and completed safety reports for the projects. Responsibilities include performing daily Safe Plan of Action (SPA's) audits, recording safety observations, conducting daily safety meetings, and promoting/monitoring a behavioral safety process.
* Project peak workforce of 900 employees on two shifts; supported 700 dayshift employees.
* Revamped 7 units to increase efficiency and production for the site facility.
* Site Safety Coordinator on site with a safety staff of eight to provide services to all Brock personnel and helped foster good relationships with the client Huntsman and other sub-contractors on the site
* Responsible for the safe work practices of 500 Brock Services employees on the Huntsman Rebuild and Shut-Down project. Worked with project manager, and two superintendents and 20 plus foremen in four trades consisting of scaffolding, insulation, painting, and maintenance trades. Provided safety tracking and developed static's relating first aid and recordable injuries. Developed plan to achieve VPP Star status for Brock at the Huntsman facility.
* Walked the property 5 – 6 times daily to insure the workers were using all required PPE properly
* Conducted oversaw the random drug screen process and transport of the employees to the screening clinic
* Acted as cooperate representative to conduct the orientation of new employees and escort terminated employees from the property

CONSULTANT
* Provided safety for those working in the field by inspecting the structure of storm damaged homes and buildings. Hurricane Rita relief for Orleans, Cameron, and Vermillion Parishes conducted 500 home inspections for asbestos containing materials. Worked in the capacity of team leader and senior inspector. Over 2,000 homes inspected between the four parishes.
* Environmental consultant working Hurricane Rita Relief, Plaquemines Parish, LA conducted asbestos, inspection and bulk sampling for 500 storm damaged homes and businesses along with hazardous material inspection and inventory.
* Conducted air monitoring for ACM crews and on the sites for electronic waste and house hold hazardous waste. Environmental consultant working Hurricane Katrina Relief, on United States Naval Bases in Gulf Port, and Pascagoula, Mississippi (Mississippi Gulf coast) with main focus on the assessment and the remediation of all storm impacted commercial and residential building on the bases as well as an off base military hotel.
* Created and provided scope of work, recommendations for remediation conducted over site, air monitoring visual clearances and conducted air sampling for air clearances.
* Environmental Health and Safety consultant working in hurricane damaged schools in St. Lucie, and Ft. Pierce, Florida. Providing remediation services for St. Lucie County School District. Provided professional opinion for the fungal extraction process and the safety of the process, and provided Safety Over Site for by and gave directives for PPE to be used in the project. Responsible for the demolition and construction of 10 schools during the remediation process.
* Supervised Safety for crews of 25 to 100 workers with multiple trades involved on the projects, and provided professional expertise in the area of duct cleaning and insulation of commercial HVAC units.
* Supervised crews on HVAC services for 4 major projects. Produced punch list form and coordinated punch list project for 35 of the 42 schools. Produced Book survey form and removal process for contaminated books at all school libraries. Helped to maintain good client relations with the school district and the vendor.

INDUSTRIAL HYGIENIST
Consulting on shut down project at Huntsman Chemical Plant Port Arthur, TX

* Monitoring Benzene, LEL, VOC, O2, H2S,
* Determining proper PPE for job tasks for confined space entry, line breaks and containment for abatement
* Monitoring NORM levels in towers and vessels on and in refining and production unit
* Asbestos Supervision and Inspection throughout the storm damaged regions of LA
* Mold Consulting in storm damaged areas of FL and MS
*
CERTIFICATIONS

* OSHA November 2008 (30-hr. course)
* Certified Asbestos Contractor Supervisor June 2006 (40-hr. course)
* Certified Asbestos Inspector December 2005 (40-hr. course)
* Certified Mold Consultant August 2005 (40-hr. course)
* Level III Security License August 2004 (40-hr. course)
* Certified Bio-Recovery Technician August 2003 (40-hr. course)
* Certified Mold Remediation July 2002 (40-hr. course)
* Certified Mold Remediation June 2001 (40-hr. course)
* Certified Defensive Driving Instructor May 1998
* Certified Parole Officer February 1998

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 4813)

Go to Search Parameters...

Brief Description

Administrative, Sales, Strong Customer Service

15 years Accounting / Administrative experience in Australia. Currently visiting South Africa but ready to move on and explore more of the world.

Extensive management, administrative, financial and contractual experience.

To secure a position with a progressive firm utilizing my diversified material management capabilities.

Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

Fifteen years experience in Process Plant Construction in the UK, Europe, Middle and Far East with regards to QS duties and Contract Administration on behalf of the Contractor.

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

Pre-casting, Installation, Cast in situ (Wing walls, sleepers, equipment & pipe support, cathodic protection foundations, sub-station & control buildings, RCC pipes for storm water culverts, Right of way, Sectionalizing valve stations

Mechanical Design Engineer with 3 years experience in sheet metal and plastic designs.

Diploma in industrial automation

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

I am 56 years old married with a 32 year old step-son. Originally from California and settled here in 1984. I hold a valid La Drivers License # 006074258 and a current TWIC card. I will provide a Basic OSHA card if required for employment

Service Technician/Welder

RED SEAL certificate and CVIP endorsement HEAVY DUTY MECHANIC

Pipe Welder

Electrical Engineering Manager/ Project Manager

I am willing to relocate my current company is closing. I love working on construction sites and prefer to stay in the mining or construction field

Civil engineer with more than five years combined experience in Civil Design, Engineering and Project Management

More than 10 years practical experience in the technical side of the risks of the Oil&Gas business

Seeking Project Engineer or Sr Process Engineer position worldwide based out of Houston Texas

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Construction Project Manager

I have around 15 years experience as a machine operator on 180 360 degree machines also dozers and dumptrucks. Also as foreman with a groundworks contractor and two years as assistant plant manager with a plant rental company. I am looking for similar work at home or abroad.

An energetic individual with an MBA and construction experience seeking for a challenging job with an institution in the Middle East that rewards creativity and hard work and helps me grow and contribute to the overall success of the firm.

This resume is a compilation of my past and present working experience. I feel that I am qualified for many positions and I believe that my resume is proof of that.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Geotechnical Engineer working in design, planning, technical follow, contract administration, reporting, financial studies and cost control of underground works such as DW, Piles, Grouting, Tunnelling, Dewatering.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

Working HSE Engineer with 7 years of experience and 2 years in Oil and Gas field in UAE

EPCM Project Manager, Design Manager, Contract Administrator, Construction Manager, 10 years experinece, Bachelor of Civil Engineering

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

Properly carry out construction wok including supervision of projects as directed by project or Design Engineer. College Diploma in Construction Trade, National Technical Certificate, Federal Trade Test Certificate, National Diploma in Building Technology

Camp Boss

Worked with BOROUGE as MECHANICAL SUPERVISOR through TECNIMONT from 11th MAY 2008 to 11th JAN 2009.

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

Looking for a bright career in the field of Supply chain Management.

I completed my Diploma in Electrical from MS University in year 2007 after that to at present I always working on AutoCAD for different Companies jobs as per them requirement.

I am qualified in operating, pipefitting, welder's helping, laboring, parts, and mechanic helping.

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu., 19 years thorough exposure in Mechanical System of Thermal P

Operations manager with 30 years experience in the mining industry.

Project Manager / Engineer, Private & Public Sector Experienced

Safety Supervisor

Skills: Architectural/Engineering: Well trained and experienced using AutoCAD 2000LT to AutoCAD 2009, PLS-CADD, Microstation V8, Artist Rendering, Illustrations, Freehand Sketches, 2D Modeling, CAD Presentations

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out