Resume - 1st class Mechanical Engineer from reputed Institution, preferably specializatio...

Misco Jobs

Resume #79418

CONTACT INFORMATION:
View contact information...

Gender: Male

Date of Birth: 06-05-1968

Languages Known: English, Hindi, Arabic, Tamil, Telugu and Kannada

Nationality: Indian

Marital Status: Married, having one son and one daughter

E D U C A T I O N A L Q U A L I F I C A T I O N:

Level Full Time Qualification University / Board State Year of passing % or GPA
X yes Ten standard State Board (SSLC) TamilNadu 1983 81.40
XII yes Twelve standard
(School First) State Board (Higher Secondary) TamilNadu 1985 85.92
Graduate yes Bachelor of Mechanical Engg Madurai Kamaraj University TamilNadu 1989 70.35
PG Diploma yes PG Diploma in Thermal Power Plant Engg National Power Training Institute (NPTI), Neyveli TamilNadu 2001 65.17
PG Diploma Part time PG Diploma in Human Resources Development National Institute of Human Resources Development (NIHRD), Madras University TamilNadu 1992 61.00

JOB DESCRIPTION
To plan, monitor, review & implement all jobs related to the project of Mechanical system for Thermal Power Plant. Project planning, scheduling, contract finalization, execution, monitoring, coordination and timely completion of project.

19 yrs experience in the field of power plant – construction/commissioning with High pressure Boilers, Steam Turbines, Electrical Generators, Technical specification preparation and study of power projects. Ability to solve technical problems related to design, project execution on site and preparation of technical reports. Experience of mechanical maintenance of power plant equipments. Experience in Steam Turbines, Boilers and Heat exchanger units and auxiliary station of steam power station.

Will be responsible for the project from concept-to-commission. Work with the EPC contractor to ensure all designs are available and translated to a work plan and ensure the contractor adheres to timelines, budgets, and quality. Ensure all regulatory approvals are finalized and registrations/certifications are in place. Work with finance and engineering to make all the necessary resources (financial and technical) available to the project. Once construction is underway, will work with HR to develop the operations organisation to take-over the project once it is completed and design all necessary training and orientation. Will finally ensure the commissioning and operation-date are adhered to.

KEY QUALIFICATIONS

Job Profile 1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu.

19 years thorough exposure in Mechanical System of Thermal Power Projects - Engg, Procurement, Execution & Commissioning. Team leader having good projects management exposure in erection of various plants like steam turbine generator, ash handling, coal handling, extraction & separation plants, mill rejecting systems,FOPh, DM/RO Plants,PTP, ESP, BOP – Electrical, etc.

Project Engineering, Project Management & Execution of Cogeneration Power Plant Projects from concept stage to commissioning which involves Strategic planning, Cash Management, Techno Commercial interaction with various suppliers of Equipments, Review of drawings, Technical discussions with Designers & Consultants, Co-ordination of site activities, Pooling manpower resources, Project follow up, etc.,
Preparation of project schedules in Microsoft Projects 2007 and good working knowledge of Microsoft Office 2007.

Special Training Undergone BHEL Training program on Industrial Steam Turbines.

Holding a valid license from National Power Training Institute, Government of India, Ministry of Power, to under take Operation & Maintenance works of minimum 100 MW Power Plants along with its associated sub station.

Operation & Maintenance Training in 210 MW Lignite Based Thermal Power Plant, Neyveli Lignite Corporation, Tamilnadu, India for a period of 1 year (2000-2001).

DCS (Distributed Control System) operation training in Tata Honey Well Ltd, Pune, India.

Job Experience Implementing safety functions to achieve accident free environment, Implementing & upgrading technology to improve Plant performance & execution of trouble free operation, Planning Preventive, Predictive & Shutdown Maintenance, Preparation of Technical specifications, Design standards & analyzing Suppliers manuals for indenting Equipments & Spares, Online trouble shooting & Maintenance of Equipments by taking care of all measures of safety analysis, Inventory control & Budgeting, Making projection of site progress and give any necessary recommendations, Drawing submission for approval in relation to site progress, materials / equipment delivery in conformity with the site progress, Studying about required documentations / data and notify actions in advance to test / commissioning, Attending the Monthly Meeting, Reviewing ITP, MOM, and correspondences for verify design change, Scheduling and Monitoring
- To update every month in the Monthly Report
- To coordinate and to confirm key milestones and explain the progress status during Monthly Meeting.
- To coordinate with subcontractor for attending weekly or by weekly progress meeting.
- To develop the new detail schedule at specific system, areas, and / or key targets meet the Owner's requirements.

Job Skills Experience in Project Management from Power sector. Have handled projects worth $ 300 million. Have exposure of working on a project of 100 MWe.

Key Responsibilities Responsible for planning, organizing & directing the team of engineers and professionals, adhering to Contractual Obligations.

PROFESSIONAL EXPERIENCE

Last Four Full Time Employment Details (Begin with latest)

Sl.No Company Name Last Designation held From To Major Responsibilities Nature Of Work
1 M/S. Anama Energies Pvt Ltd, Pune, India - An ISO 9001:2000 Company - EPC Contractor, BOOT (Build Own Operate Transfer) business and Energy Auditors for Thermal power plants, Steam Turbine based power plants, Cogeneration projects and Natural gas based cogeneration projects in form of Gas engines coupled with Waste Heat Recovery system at exhaust offering Electrical power and thermal savings. Senior Manager (Projects, Services & Commissioning) 8th Feb 2008 Still in service Heading Thermal and gas power plant projects.

Responsible for the successful completion of all the projects to the entire satisfaction of various Customers, meeting the commercial and quality targets through a team of Project Engineers.

Strategies procurement plan to ensure cost effective procurement, Ensure compliance of all the commercial aspects of all the projects, including preparation of the budget and monitoring, Allocation of a job to a Project Engineer keeping in view his management skills, work load and job understanding.
Involves himself in the initial and detailed planning and preparation of procurement, cash flow and execution plans of all the projects.
Responsible for continuous enhancement of management skills of Project Engineers with introduction of statistical techniques, project control and monitoring tools.
Ensure the monthly cash inflow targets, by getting the different milestones, achieved on all the running projects, Aims for the highest levels of excellence in the execution of projects.
Supports team members by developing their knowledge and expertise and motivate them from time to time.
Identify new techniques and tools to tackle the core issues of a project at any time of its stage, Identify and share knowledge on best practices gained from past projects with team members to promote the quality of product / project.
Continuously monitors projects, schedule & cost through IT based project managements system and ensure timely action in case of any delay or suspected cost over-run, Demonstrates good communication and decision making skills, while interacting freely with the customer, Assists in making the bids competitive, by providing all the technical and commercial support to marketing, Exercises pro-active role within the manufacturing business to ensure continuity and expansion of business.
Handling Turn Key Power Projects for Apollo Tyres Limited – Chennai (2 X 25 MWe) coal based, Apollo Tyres Limited – Baroda (1 X 50 MWe) coal based, Deepak Fertilisers & Chemicals Limited, Mumbai (1 X 50 MWe) coal based, right from concept to commissioning and handing over the power plant to client in safe custody.
Completion of project within stipulated time schedule as per PERT or MS Project chart.
Nature of work involves heat, mass and power balance study, Design and Detailed Engg, Procurement as per planned budget, Techno commercial interaction with vendors and client, Dispatching the items to site, completion of civil work, erection, testing and commissioning including PG Test.
2 M/S. J.P. Mukherji & Associates Pvt. Ltd (Cogeneration Power Plant Consultants, Pune, India) Site Manager for 100 MW Cogeneration Thermal Power Plants June 2004 7th Feb 2008 Worked as Senior Power Plant Engineer in J.P. Mukherji & Associates Pvt. Ltd (Cogeneration Thermal Power Plant Consultants), Pune.

Abroad Assignment

Deputed to Sudan in March 2005 as Site Manager to look after Erection, Commissioning, Testing & Performance Trials of 100 MW Cogeneration Thermal Power Plants.
Cogeneration Project successfully commissioned & our team returned back to Pune home office in August 2007.

Duties and Responsibilities:

* Responsible for Conceptual Planning of the Project.
* Responsible for Planning and Estimation of Site Infrastructure
* Responsible for Resource Mobilization
* Responsible for overall administration of the Project.
* Responsible for M.I.S. (Management Information System)
* Responsible for timely submission of monthly RA bills, labour bills, purchase bills. Also responsible for preparation and certification of Final Bills and reconciliation of material.
* Responsible to minimize wastage of Construction Material.

1. Assist Project Manager (Project Sector) in all aspects of project planning and implementation management and work in close liaison with General Manager, Site Manager (Sudanese Counterpart), Factory Manager, Finance Manager of Assalaya, New Halfa, Genuid and Sennar Power Plants and fully responsible for all project activities at site.
2. Ensuring compliance with quality and specifications as per contract. Verify and control the technical documentation which includes proper approvals, makes as per vendor list, standards prior to start of erection work.
3. Technical co-ordination between contractors especially with regard to exchange of engineering data at site.
4. Monitor progress of erection work and identify delays. Define remedial steps needed to accelerate the progress of the project work.
5. Communicate regularly with all the parties concerned regarding the status/progress of work, constraints, etc and ensure work progress as per time schedules.
6. Co-ordinate post-shipment inspection, receipt of goods at project site, site storage, etc.,
7. Co-ordinate all mechanical & electrical jobs concerned to installation of John Thompson Boilers, SKODA TG Set and Auxiliaries, SULZER Cooling tower, KSB Pumps, Screw & Reciprocating Compressors, FENNER Material handling system, EUROWATER DM Water treatment plant, PGBI 11/33 kV Substation & Transmission lines, etc.,
8. Co-ordinate all mechanical & electrical interfacing jobs with respect to existing factory equipment / processes and systems.
9. Periodical work progress reports on technical aspects of the project in consultation with various parties involved.
10. Scheduling sharing of factory's site facilities between different contractors.
11. Verification of contractor's progressive payment requisitions against actual work completed.
12. Verification of contractors claims for extra payments and extension of time for completion.
13. Contractors compliance with safety regulations.
14. Monitor commissioning and performance trails.

3 25MW Cogeneration Thermal Power Plant,
GEM Sugars Limited,
Karnataka, India. Senior Power Plant Engineer January 1995 May 2004 Responsible for Operation & Maintenance of 25 MW Cogeneration Power Plant. 1. Operation & Maintenance of 140 TPH, 66 Bar IJT make Water Tube Boiler & its Auxiliaries, ABB E.S.P (Micro Processor based Rapping Mechanism), 25 MW BHEL Double Extraction Condensing Turbine & its Auxiliaries, Centrifugal Pumps, Screw & Reciprocating Compressors, 100 TPH FENNER Material Handling System, Paharpur make Fully RCC constructed Induced Draft Cooling Tower, 40 TPH Reverse Osmosis Water Treatment Plant, 11/110 kV Electrical Sub Station.
2. Total Control System of Boiler & Turbine through DCS (Tata Honeywell's TPS 3000 release 530)
3. Project involvement in Boiler & Turbine since erection.

4 36.5MW Cogeneration Power Plant,
Bannari Amman
Sugars Limited,
Karnataka, India. Power Plant Engineer January 1990 December 1994 Responsible for Operation & Maintenance of 36.5 MW Cogeneration Power Plant. 1. Operation & Maintenance of 200 TPH (120 TPH, 80 TPH) 86 Bar / 66 Bar, Super heat temperature - Coal, agro based BHEL Boiler & its Auxiliaries, Thermax Boiler & its Auxiliaries, ABB E.S.P (Micro Processor based Rapping Mechanism), 20 MW + 16.5 MW, 11 kV BHEL Turbo Generator & its Auxiliaries, 100 TPH FENNER Material Handling System, Paharpur make Fully RCC constructed Induced Draft Cooling Tower, 87 TPH DM Plant, 36 TPH RO Plant, 11/66 kV Sub Station.
2. Operation of Equipments through DCS (Tata Honeywell's TPS 3000 release 530).
3. Project involvement in the above areas since erection.
4. Commissioning activities of 120 TPH, 86 Bar BHEL Boiler & its Auxiliaries, Operation of above Equipments through DCS (Yokogawa's CS – 3000) at BASL Unit-I).

REFERENCE LIST
Will be provided

Notice Period: 2 months

Current CTC drawn/annum (in India): Indian Rupees. 7, 20,000/- + Incentive of Rs. 3 Lacs + Bonus + Site allowance

Tax free CTC expected (in India): Indian Rupees. 15, 00,000.00 per annum excluding Bonus and Site allowance

Tax free CTC expected (in Abroad): Indian Rupees. 24,00,000.00 ( US Dollars 60,000.00 ) per annum with free boarding, lodging, telephone and transportation along with 15 days paid leave once in 5 months (To & Fro air fare by company)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 4798)

Go to Search Parameters...

Brief Description

Fifteen years experience in Process Plant Construction in the UK, Europe, Middle and Far East with regards to QS duties and Contract Administration on behalf of the Contractor.

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

Pre-casting, Installation, Cast in situ (Wing walls, sleepers, equipment & pipe support, cathodic protection foundations, sub-station & control buildings, RCC pipes for storm water culverts, Right of way, Sectionalizing valve stations

Mechanical Design Engineer with 3 years experience in sheet metal and plastic designs.

Diploma in industrial automation

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

I am 56 years old married with a 32 year old step-son. Originally from California and settled here in 1984. I hold a valid La Drivers License # 006074258 and a current TWIC card. I will provide a Basic OSHA card if required for employment

Service Technician/Welder

RED SEAL certificate and CVIP endorsement HEAVY DUTY MECHANIC

Pipe Welder

Electrical Engineering Manager/ Project Manager

I am willing to relocate my current company is closing. I love working on construction sites and prefer to stay in the mining or construction field

Civil engineer with more than five years combined experience in Civil Design, Engineering and Project Management

More than 10 years practical experience in the technical side of the risks of the Oil&Gas business

Seeking Project Engineer or Sr Process Engineer position worldwide based out of Houston Texas

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Construction Project Manager

I have around 15 years experience as a machine operator on 180 360 degree machines also dozers and dumptrucks. Also as foreman with a groundworks contractor and two years as assistant plant manager with a plant rental company. I am looking for similar work at home or abroad.

An energetic individual with an MBA and construction experience seeking for a challenging job with an institution in the Middle East that rewards creativity and hard work and helps me grow and contribute to the overall success of the firm.

This resume is a compilation of my past and present working experience. I feel that I am qualified for many positions and I believe that my resume is proof of that.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Geotechnical Engineer working in design, planning, technical follow, contract administration, reporting, financial studies and cost control of underground works such as DW, Piles, Grouting, Tunnelling, Dewatering.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

Working HSE Engineer with 7 years of experience and 2 years in Oil and Gas field in UAE

EPCM Project Manager, Design Manager, Contract Administrator, Construction Manager, 10 years experinece, Bachelor of Civil Engineering

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

Properly carry out construction wok including supervision of projects as directed by project or Design Engineer. College Diploma in Construction Trade, National Technical Certificate, Federal Trade Test Certificate, National Diploma in Building Technology

Camp Boss

Worked with BOROUGE as MECHANICAL SUPERVISOR through TECNIMONT from 11th MAY 2008 to 11th JAN 2009.

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

Looking for a bright career in the field of Supply chain Management.

I completed my Diploma in Electrical from MS University in year 2007 after that to at present I always working on AutoCAD for different Companies jobs as per them requirement.

I am qualified in operating, pipefitting, welder's helping, laboring, parts, and mechanic helping.

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu., 19 years thorough exposure in Mechanical System of Thermal P

Operations manager with 30 years experience in the mining industry.

Project Manager / Engineer, Private & Public Sector Experienced

Safety Supervisor

Skills: Architectural/Engineering: Well trained and experienced using AutoCAD 2000LT to AutoCAD 2009, PLS-CADD, Microstation V8, Artist Rendering, Illustrations, Freehand Sketches, 2D Modeling, CAD Presentations

Proficient in Document Management System & Secretarial Functions

Mechanical Engineer with 3 years of experience in electrical instalations

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out