Resume - I'm a Canadian citizen with a Master of Science in Civil Engineering, specializi...

Misco Jobs

Resume #800

CONTACT INFORMATION:
View contact information...

Objective    Find a middle level management position requiring application of Construction and Project Management (CM/PM) knowledge areas, specifically in project controls. I have a special interest in claims, International CM/PM, and Dispute Resolution.

Education    Master of Science (M.S.), Civil Engineering, specializing in Construction Engr. & Management
Virginia Tech., Blacksburg, Virginia, USA    Dec 1992
Main Courses: Construction Control Techniques (including CPM, primarily P3), Project & Company Management, Contract Administration and Claims Avoidance, Estimating & Cost Engineering, Mgt. Lessons from Construction Failures, Occupational Safety and Hazard Control.

Work History    Director, Construction Management International, Inc.             Dec 1995 - Present
Project and Construction Management consultant on following projects with a Total Installed Cost (TIC) of up to C$3.2 Billion.

JDE Construction Management, Canada: Prepared scheduling section of an Expert Report on a C$30 Million claim. Evaluated and compared contractor’s as-built CPM schedule to the as-planned CPM schedule in P3 on a 160 MW generating station built in Nova Scotia in 1994. Also reviewed documents such as meeting minutes, weekly and monthly progress reports, depositions, correspondence and monthly invoices. Also worked on other claims, mainly dealing with schedule issues on industrial construction projects.

Bantrel, Inc. (a Bechtel subsidiary), Canada: Senior Project Controls Specialist for Bantrel, a multi-disciplinary engineering company dealing mainly in petrochemical projects. Project Controls lead for Co-Op refinery (detailed engineering) and Petro Canada Athabasca Terminal (DBM and detailed engineering). Responsibilities include schedule preparation, updating and monitoring in P3 (v3.0) and MS Project, preparing Engineering Progress & Performance Reports (EPPR) for progress and earned value analysis, participating in weekly progress meetings, trend preparation & monitoring.

Suncor’s Millennium Oil Sands Project, Canada: Project control and contract administration for pipe fabrication, module assembly and vessel dressing contracts as a part of Millennium Construction Contractor’s (MCC) Modules and Off-Site Fabrication (MOSF) Group in Edmonton. Within the Project Controls group, responsible for forecasts, trends, contract preparation, contract modifications, checking contractor invoices and preparing invoice approvals, participating in project progress meetings, negotiating and closing out contracts with the contractor.

AMEC, U.S.: Commercial/Risk management assignments in NY City, Chicago & San Francisco. Participated in Risk Management meetings and workshops for proposals and projects in NYC, Chicago and San Francisco including Bronx Paper Mill and SF Jail #3. Responsible for preparing a Risk Management Plan, monitoring and controlling the progress of the plan, keeping the Commercial Director and AMEC’s Risk Manager in London upto date on the progress of the plan.

Maple Leaf Processing Facility (C$112 Million), Canada: Various Construction Management functions on a new pork processing plant with a TIC of C$112 Million. Responsible for quantity take-offs, estimating, subcontractor bid analysis and recommendation to the client, schedule preparation and monitoring, client meetings, field inspections when needed.

Kusumkant & Company, Bombay, India: Delivering lectures and seminars on Construction Management for educational institutions and private companies, marketing and promoting construction management concepts, safety and schedule consultant on residential and industrial projects.

Field Engineer/Estimator, CRSS Constructors, Inc.    Dec 1994 - Jul 1995
Federal Correctional Institution (FCIL), Yazoo City, MS Const Cost - US$55 Million

Estimated time and cost impact of change orders, prepared project policies and procedures manual for Federal Bureau of Prisons (FBOP), negotiated subcontractor change orders, conducted field inspections, prepared weekly reports of problems and solutions, assisted project manager in daily operations, analyzed contractor’s CPM schedule and provided recommendations for improvement, and performed contract administration functions using Primavera Expedition when required.

Assistant Project Manager, The Haskell Company        Feb 1993 - Nov 1994
Jacksonville, FL, USA
Major Projects: Palmetto General Hospital (US$18M - including Psychiatric facility, Oncology center, Radiology addition, and renovations) and ALLTEL Stadium for NFLs’ Jaguars (US$125M).

Quantity takeoffs and cost estimating, prepared bid packages, evaluated and awarded subcontracts and purchase orders, managed subcontractor performance, prepared and updated project schedules including resource loading, prepared weekly & monthly progress reports, prepared RFPs and RFQs, coordinated work between field & home office, performed document management and control, performed safety and quality control functions for the stadium project including preparing project safety and quality control manuals and holding weekly subcontractor safety meetings, and managed change order process.

Skills    Excellent computer & communication skills, highly adaptable and analytical

Computer Skills    Scheduling: Primavera Project Planner (P3), Microsoft Project, and SureTrack
General: Microsoft Office Professional, Primavera Expedition, WordPerfect, and Lotus
Diploma in Computer Studies, Aptech, India (affiliated to NCC, UK)    Dec 1989

Certification    Project Management Professional (PMP), PMI
        Project Management using Primavera Project Planner (P3)
        Canadian Risk Management (CRM) certification

Other    Expected completion of Certified Construction Manager (CCM)-end of 2002
    Expected completion of Professional Quantity Surveyor (PQS)-end of 2002

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 4460)

Go to Search Parameters...

Brief Description

-Master Of Business Administration (MBA -Finance) -Comprehensive Knowledge Of Accounting And Finance Concepts And Principles -Implementing And Supervision Of Cost, Budgeting, Scheduling, Cash Flow, Estimating -Work Experience More Than 9 Years In U.S. Based Companies

I'm a Canadian citizen with a Master of Science in Civil Engineering, specializing in Const. Engr. and Mgt. from Virginia Tech. I have nine years experience working on prestigious construction projects - in EPC, CM-GMP, CM Agency, Design Build, and lumpsum environments.

Objective A position as Designer/Draughtsman/Estimator/Coordinator

20 year Army Veteran with Fleet Management, Logistics, supply and accountability experience.

Being in the field of engineering for more than 5 years, experienced in various jobs like HVAC systems, MEP, Air pollution Control Systems, Water Treatment Plants Fabrication & erection

I have master degree in architectural engennering, good experiences in construction and architecture designe, I have realized industeriel and reidentiel projects and I have good computer background

Twenty-eight years of multi-disciplined EPC/EPCM Project Management experience. Successfully leading major heavy civil, mining, water resource, transportation and environmental projects and administering numerous multi-discipline design, procurement and construction programs.

Very dedicated, Hardworking, energetic, creative Tunnelling Operator/Engineer have 11 years experienced in Micro Tunneling. Presently working in Kuwait and willing to relocate anywhere in the world.

Twenty-five years of experience; recently as Principal/Lead Mechanical Engineer. 5 years in middle/senior management. Specialist of rotating equipments in EPC of pumps, compressors and turbines. Oil & Gas experience includes Refinery, Upstream, Arctic modular plant, Pipeline pump & compressor

i'm chemical engineer working presently with TOYO ENGG. INDIA LTD. attached pls. find my resume.

I am Quality Control Engineer with Seventeen years experience in Oil&Gas and Power sectors.

piping engineer , pipeline engineer , mechanical engineer, construction manager

HR management, including: recruitment, adaptation, certification, talent management, event management.

Planning Engineer with more than 5 years local and international experience in the field of mechanical / planner engineering from construction of Industrial, Building and Domestic Residential onshore project acquired extensively with past position handled on the above qualification.

Has an extensive experience of 4 years & 10 months in this trade of discipline from design to implementation of projects both Civil and MEP Works, wide scope of planning, quantity surveying, estimating, cost engineering, cost controlling and project management skills.

Planner & Contract engineer

Senior HSE Manager

Experience CNC Maintenance engineer including installation and troubleshooting. Familiar with Fanuc and Mitsubishi CNC control

Document Control & IT / IS Support Services. Defining and implementing the strategy for the Documentation Management System during the project phase up to the hand-over to Operation.

I work almost 15 years and I can Repair the following Equipment in my CV

A motivated, dedicated and technical expert in mechnical and electrical system

I am lead field engineer in Jubail 2 project, AVS with good managerial skills

Drafter

Electrical foreman, superintendent, master electrician. Very familiar with NEC

During 19 years, I have gained some practical field experiences & knowledge as a construction civil engineer/ manager which includes, projects construction supervision, project management, quality control, coordination & liaison in the project team, field survey

qualified to CSWIP 3.1 and AWS CWI, Knowledge of welding Inspection, piping and mechanical inspection.

I am seeking employment on construction/shutdown projects as a QA/QC inspector or planner.

Mechanical Cement & Power plant Projects Installation, Commissioning & Maintenance

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Senior Construction/ Field Engineer/Superintendent with HND Mechanical Engineering and a member of the institute of incorporated engineers. I have 15 years of experience in Construction management in various roles and locations around the world, working for major EPC contractors.

5 Yrs plus experience in overseas construction project in Singapore

Computer Knowledge: AutoCAD, Power Point, Windows. Bilingual fluent English and Spanish, scale models confection, field inspection. Willing to offer a high quality work, very responsible. Professional license # 3435

Basic Knowledge in Auto Cad , Microsoft word &Microsoft excel

Electical, plumbing, carpentry, building and ground maintenance as well as hvac experience

Degree qualified Construction Manager with experience of working in wastewater treatment industry. I possess both Management and Design capabilities.

Extensive knowledge of structural design of boats and barges as well as general steel and aluminum construction, machinery, propulsion systems both conventional and water jet. Extremely knowledgeable in AutoCAD and Microsoft Office programs. Well versed in A.B.S., D.N.V., USCG rules

Mine Electricain

mig, 035 wire to 055 wire; fluxcore. 035 to 1/16 wire; stick. 7018 & 6011

Fiber Optic Technician, Troubleshooter of terminal equipments and links.

Hardware, Windows, Office-2007, Word, Adobe Acrobat Reader, Autodesk DWF Viewer, Internet Explorer, AutoCAD-2008, 3ds Max-9, Architectural CAD, Smart Draw & Photoshop

AutoCAD, Autodesk LandDesktop, Drafter, Designer, Architecture, Residential, Commerical, Building, Structure, House

i am a civil and water engineer by profession and i have a master's degree in water resources engineering

I am a licensed civil engineer with 5 years experience in Piping works using AutoCAD (2D & 3D)

Fabrication of structures,piping,ducting,pressure vessels,heat exchangers,storage tankages etc,Drawing interpretation,P &ID,Process development,Cost controll,QA,QC,Engineering coordination,Preparation of factory,tool room layouts,Client,Supplier negotion,Preparaion of BOQ

Senior Welding Inspector

Camp Boss/Driver/Roust about

Recent MBA Graduate looking for entry level positions in finance and general business management – Financial, Commercial/Marketing and Project Controls Associate/Analyst. Excellent communicator with fluency in English and Russian. Solid academic credentials in business, economics, analytical finance

Experience with instrumentation, controllers, and computers, in the power, semiconductor, food, paper, petroleum, and chemical industries.

I'm available for sea service already now. I'm appreciating greatly my experience under different flags, the perfect engineer's level with chief engineer licence, good seamanship and real engine room team

Knowlegeable on 2D&3D AutoCAD Drafting, ArchiCAD, Vectorworks, Photoshop, Office Apllication, - Word and Excel, Outlook , Internet, Manual and Computerized Rendering, Mechanical/ Conveyor Technology (as per ASTM, ISO, JIS, and Other Drawing Standards), well versed on the English System Units.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out