Resume - Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

Misco Jobs

Resume #80200

CONTACT INFORMATION:
View contact information...

Objective:

Seeking a position in the field of mechanical engineering to utilize my technical skills and knowledge for achieving organization goals.

Professional Summary:

* 2+ Year experience in EPC/ENC in Engineering & Design of Pressure Vessel & Piping Equipment.
* 2000+ hours in Compress, PV Elite, CAESAR, Nozzle Pro.
* Working knowledge of ASME Sec VIII Div 1, ASCE 7-05, ASME B16.5/47, B31.3, B31.1 and other applicable standards.
* Excellent Team Player and individual skills, self-motivated and quick learner with a good knack to learn new software and techniques.

Professional Experience:

Mechanical Design Technology Engineer/Pipe Stress Engineer, Foster Wheeler USA Corp., TX, USA
Jun 2007 – Feb 2009

* Design, Analysis and Verification of pressure vessels, including Coke Drums.
* Stress analysis of Critical Piping systems connected to static and rotary equipment (Hot Pumps, Heat Exchangers, Pressure Vessels (Columns / Drums), Tanks, and Heaters).
* Determining Pipe Support locations, Types of Support and Support Design (supports and spring hangars).
* Assess and Qualify equipment nozzles under high temperature critical conditions based on calculated loads on static equipment due to piping systems (piping and vessel side). Conduct flange leakage checks.
* Produce and check calculations of detailed piping stress analysis reports of corresponding site revisions.
* Conduct local stress checks and Flange Leakage checks.
* Work with P&IDs, Plant Layout and Plot Plans.
* Identifying & Preparing Critical line list P&ID and line list as per the Stress Specification.
* Preparing the Specification for the Allowable Nozzle Loads.
* Review General Arrangement and Drawings, Isometrics (ISOs).
* Coke Drum Vibration Analysis. Piping Vibration Analysis to determine frequency and modifying existing design to increase frequency to reduce vibration in lines and match that of Coke Drum as close as possible.
* Rigging and Lifting Analysis and Design of Lifting attachments and skirt bracing.
* Producing requisitions and job specifications.
* Internal and Vendor Design Review and Validation.

Client projects: BP OCC (IA), Valero PAR FCC Revamp(TX)

Design Engineer, Border Steel Inc., TX, USA.
May 2005 – Jan 2006

* Analyze tensile test models of rebar for stress distribution.
* Structural Analysis to ensure that new platform designs can withstand a load of 4.5 tons (for a suggested load increment from 2 to 4 tons).
* Daily interaction with the engineering team enabling them to achieve their strategic objectives.
* Check Design data.

Academic Experience:

Graduate Research Assistant, University of Texas at El Paso
Jan 2004 – May 2005

* Model and Analyze Shear Band Formation in Tensile Test specimen and Validate results with experimental values.
* Work in a distributed and parallel computing environment. Install Software, licenses, product configuration. Install hardware and provide support.

Graduate Assistant, University of Texas at El Paso
Jan 2006 – May 2007

* Tech Support for webCT, software and Video Conferencing equipment.
* Maximize resource utilization and simplify tasks, recommend new approaches to technical problems.
* Provide Training to a group of technicians.

Thesis:

* Smoothed particle hydrodynamics (SPH) modeling of Friction Stir Welding (FSW). – 2D and 3D FSW structural only model with SPH elements were modeled and a Finite Element Analysis (FEA) study was done to relate shear bands to formation of weld.

Finite Element Analysis (FEA) Academic Projects:

* 3D Extrusion – a 3D Model of extrusion of steel using Smoothed particle hydrodynamics elements.

Educational Qualifications:

Masters of Science in Mechanical Engineering, University of Texas at El Paso
Dec 2007

Bachelors of Engineering in Industrial Engineering, Nagpur University, India
May 2003

CAD / CAE and Computer skills:

* Engineering / CAD / FEA: COMPRESS, PV Elite / Coade Calc, CAESAR II, Nozzle Pro, AutoCAD, LS Dyna, HyperMesh, OptiStruct, SolidWorks, Algor FEA.
* Project & 3-D CAD: Smartplant Review, Projectwise
* Programming: C, C++, MATLAB.
* Operating Systems: Windows (3.1, 95/98/ME/XP/NT), Linux, DOS.
* Office Applications: MS Office (Word, Excel, PowerPoint, Access), MS Visio, MS Publisher, Adobe Acrobat Professional.

Memberships and Associations:

* Member of ASME from 2004.
* Vice President (Education) of FW Toastmasters from 2008. Charter Member since 2008.

References: Furnished upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2551 to 2600 of 4813)

Go to Search Parameters...

Brief Description

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Experienced frame and finish carpenter with cabinet experience and management experience

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

I am HSE professional having work experience of chemical industry and drilling , my education level is masters also completd courageous leadership course in health and safety,management of change, IOSH managing safely,ISO internal audit course,OSHA 18001 internal audit course.

Document Controller, Coordinator, Hr, Admin, IT

High-energy administrative, dependable professional with good judgment and wisdom. Excellent knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, HR information systems, human resources modeling, leadership technique,

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

Versed in Production and Manufacturing of MIG wire as well as hands on experience in Planning and Manufacturing for turnkey Projects.

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

Recruitment Specialist/HR Generalist

SDS2, Xsteel, AutoCAD Steel Detailer.

Telecommunication, Health, Safety, Environment and Security Coordinator

ITI in Draughtship

Create learning opportunity to work in architectural firm and deal with many graphic jobs.

ASE CERTIFICATIONS: Drive Train / Engine Repair / Manual Drive Train / Axles / Suspension / Steering / Brakes / Fuel Line Distribution / Heavy / Medium Truck Technician.

HVAC Skills

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Construction Electrical and Instrumentation Engineer

Qa/Qc Inspector

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

10 plus years in construction from heavy civil, to residential. MAinlt bridge and highway building

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

I have over ten years in the asphalt plant field. I am willing to relocate to just about anywhere in the world for the right job

Company Accountant with ten years experience including chartered accounting, manufacturing and construction including three years experience in Papua New Guinea. Looking for another "expatriate" company accountant position. Available March 2004.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

Results-oriented, Construction site Engineer with 7 years of experience in all facets of the Industry. Verifiable track record for successful completion of many projects.

Red Seal/Interprovincial Journeyman Welder with B-Pressure equivalent & CWB certification

First Prev 51 [ 52 ] 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out