Resume - I am an engineering graduate and i've been working as a material controller in a...

Misco Jobs

Resume #80451

CONTACT INFORMATION:
View contact information...

Objective: I am looking for a job which fits my qualifications and experience and I I can put my knowledge and skills into practice.

: Material Controller- Gulf Steel & Engineering (Salam Petroleum & Services)
Street 16, Gate 121, Industrial Area
Doha Qatar
P.O Box # 22028
August 6, 2007 – Present

- Responsible for receiving raw materials from suppliers and delivery of finished products to the costumers
- Ensure that materials received conforms with the required specifications and standards and have proper documentations
- Ensure that materials were approved by QA/QC prior to delivery
- Facilitate the loading and unloading of materials
- Making delivery notes, receipt vouchers, delivery reports and other documents pertaining to the incoming and outgoing materials
- Compile hard copies of all necessary documents including incoming and outgoing delivery notes, mill test certificates, purchase orders, receipt vouchers, material request forms and material stock updates
- Making monthly reports to the accounts department
- Issue materials for the fabrication upon request
- Conduct daily inspection on the workshop to ensure that all materials are in their proper places to optimize the use of space in the workshop
- Check if the excess materials in a job can be used in other drawings
- Communicate to the suppliers, site engineers, and production supervisors

: Full-time Lecturer/ Center Technician- Informatics Computer Institute
Consolacion, Cebu
January 26, 2006 – June 16, 2007

- Develop, plan and sustain the course assigned
- Design, plan and develop training and visual aids and other course related materials
- Develop and conduct student evaluations
- Attend to student's feedback and course related concerns
- Coordinate with the Services department concerning requisition of materials such as handouts, workbooks, test papers. Etc.
- Ensure good working condition of center laboratory equipments
- Ensure that only licensed software's are installed in all computers

: Part-Time Computer Instructor- Royal Christian College
Mandaue City, Cebu
June 6, 2005 –Nov 16, 2005

- To handle the subjects assigned by the department head
- To provide students quality teaching methods
- To make the lessons interesting and more interactive.
- To evaluate the learning progress of the students
-

: Enrollment Staff-Encoder
Cebu City
April 2002 –June 2004

- Assist in setting up the network and materials to be used for the entire enrollment period
- Provide technical support to other staff and to students
- Encode subjects enrolled by the students and address to their concerns
- Report to the enrollment head at the end of the day

College: University of San Carlos – Technological Center
Computer Engineering
March 2005
Nasipit, Talamban
Cebu City

High School: Masbate National Comprehensive High School
March 1999
Masbate City

Elementary: Liceo de Masbate
March 1995
Masbate City

: University of San Carlos Computer Society
Member
2002 –2005
: USC COMSOC Computer Hardware Assembly and Digital Design Training
Lecturer
August 23 - September 18, 2004

Seminars and Trainings Attended

: Machine Vision
University of San Carlos –Technological Center
July 19,2003
: PIC Controller
University of San Carlos –Technological Center
August 2, 2003
: Computer Science Opportunities for Philippine Students
University of San Carlos –Technological Center
January 11, 2004
: System Analysis and Design
University of San Carlos –Technological Center
February 7, 2004
: Software Design Engineering
University of San Carlos –Technological Center
February 21, 2004
: PCB Fabrication
University of San Carlos –Technological Center
January 2005

Gold Medallist - Palarong Bicol '98 - Karate Do
Masbate City (1998)

Gold Medallist- Regional Inter- School Tae Kwon Do Championships 2003
Cebu City (Region 7)

Silver Medallist- CAAA- Tae Kwon Do (Cebu City)
2001 and 2002

Silver Medallist- Batang Pinoy 2000 –Tae Kwon Do

Bronze Medallist- Palarong Bicol '99 –Tae Kwon Do

Bronze Medallist- LGU Olympics '97 – Tae Kwon Do

Software: Assembly Language, Turbo C, Very High
Speed Integrated Circuits Hardware Design Language (VHDL), Microcontrollers,
AutoCAD, Orcad, Proteus6, Eagle Layout and
Various CAD Software and Applications, MS Office and Operating Systems

Hardware: Digital Design, Computer Hardware and Software
Trouble Shooting and Repair, Computer Hardware
Assembly and Networking

Age: 26 years old
Place of Birth: Masbate City
Date of Birth: March 14, 1982
Height: 5 feet 6 inches
Weight: 67 kilograms
Religion: Roman Catholic
Civil Status: Single
Nationality: Filipino
Interests: Mountaineering, Cycling, Dogs, Robotics, Martial
Arts and Computers

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4251 to 4300 of 4766)

Go to Search Parameters...

Brief Description

Pro Engineer 2+ years experience

Canadian Medic

I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.

Iinterested and would like to have an opportunity to work with your company, as Account Executive. I believe there would be a good fit between my skills and interests and your needs.

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

Senior administrative skills, leadership, international recruitment, training, generalist HR, education, liaison,

During my studies I worked in cooperation with the Egyptain Geological Survey in the Eastern and Western Desert of Egypt and in another project together with the University of El Jadida, Morocco. Main subjects were mapping and sampling as well as geomagnetic. Working experience is shown in my CV.

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

I am Construction Supervisor Who Worked under Dam, Channel, Roads, Mining many counties of the world - Around 17 years. My Area was Filling, Excavation Site Arrangements, People Controlling, Training etc.

To secure a position a Purchasing /Buyer In your company.

Master Mariner and have experience as Senior Officer on LPG Carriers

DRILLING FLUID ENGINEERING ( MUD ANALYSIS), SURVIVAL AT SEA AND HELICOPTER UNDERWATER ESCAPE TRAINING, M S SUITE

FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,

Auto CAD Operator & 1 Year Working Experience in Auto Plant (specialized software of piping)

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

B.Tech Engineer having 2+ years of experience presently working as a planning engineer with Reliance ,Jamnagar for JERP project. Can handle softwares required for job accomplishment.

Geotechnical, Geological Exploration, Resevoir geologist

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.

Im instrument Engineer ,experianced in controlling physical parameters(temp, press,flow) using microcontrollers,control aspects, designing new control systems,installation and maintainence

I have Masters Degree in Geology with experience in Coal Exploration.

CSWIP 3.1, ASNT level II in RT, UT, MT and PT, ISO 9000:2000 Lead Auditor

Construction Manager, Side Manager, Supervisor, Hydraulics Engenieer

My experience have given me a broad adaptation of works in various areas. I can and will succeed in almost every area of work as I am a practical and fast learner. I have sufficient knowledge in computer basics and literacy. I am a fast typist and can create text documents

I am an engineering graduate and i've been working as a material controller in a reputable company in qatar for two years. i am looking forward for a career growth and gain more experience. I am willing to accept any jobs which i am qualified of and my experience is necessary.

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Project Control (Cost & Planning) with +5 years of exp

This letter is to express my interest in applying for an oil rig job. I have an Irish national craft certificate and over 7 years experience as an electrician. Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up wi

Worked in oil and gas industries for over 6 years as Planning Engineer and Project Engineer. Advance in using Primavera Project Planner Ver. 3.1. Language skills including English, Chinese, Malay and Chinese dialects. Worked in China for the last 3 years. B. Eng. from Melbourne University.

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Survey Technician/Mapper/Drafter

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Supervise the execution of new 115/69/13.8kV projects (substations) from conception to completion.Design and development of all aspects of electrical system/facilities, substations and distribution

Seeking a position in Quality Control/Assurance Management where my extensive background, abilities and expertise will be used efficiently.

Instrument Technician with Overseas Russian Experience.

Demonstrated planner with diverse experience and knowledge in Airport project, Gas and Oil Projects and general MEP projects. Strong Engineering and Management background combined with certification in project management courses. Adept at learning new concepts quickly, works well under pressure

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

I am a Survey Engineer, experienced in multi disciplinary projects, with a good track record of world class projects. I am highly interested in any position with international or overseas exposures and possibility to maximize skills in Surveying, Management, acquire new ones and progress.

More than 8 Years experience in piping & Steel Structural pre-erection, post-construction engineering activities, and Oil Drilling Services on Land and Offshore Rigs; Worked in Middle East, Central Asia and India under international and well-known construction companies like Schlumberger Drillin

Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a

I am a professionally qualified Process Engineer with experience of process and product development, as well as quality control at Energy and Telecommunication Industries. I am accomplished to multinational environment, related to process modeling, project leadership, quality control and auditing.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 [ 86 ] 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out