Resume - More than 17 years experience in welding inspection and NDT testing. Main duties...

Misco Jobs

Resume #81107

CONTACT INFORMATION:
View contact information...

Professional Certification
: CSWIP Welding Inspector 3.1 TWI, UK.
Cert No: 30348
CSWIP Radiography Interpretation Level 2
Cert No: 32072
Ultrasonic Level 2 PCN -3.1,3.2,3.8,3.9
PCN No: 203430
ASNT Level 2 Radiography Interpretation.
ASNT Level 2 Magnetic Particle Testing.
ASNT Level 2 Dye Penetrant Testing.

Course Attended: CSWIP Welding Inspector 3.1 conducted by TWI
OIS Malaysia in-house course in UT, RT, MT,
PT and Eddy Current.
OIS Malaysia in-house course in Radiation
Safety.
Basic NDT Principles.
Malaysia AELB Level 2 Radiation Inspection.
Lost Prevention System (LPS) organized by
Exxonmobil Kuala Lumpur.
Offshore Safety, Sea Survival, Basic Fire
Fighting.
And Helicopter Underwater Escape Training
(HUET) at MAS/SEQU Training Center Kuala
Lumpur (expired).
H2S Basic Course.

Computer Literacy: Microsoft Word, Excel and Power Point.
Point of origin: Kuala Lumpur, Malaysia
Home Airport: Kuala Lumpur International Airport
Preferred work location: Malaysia
Salary: Neg.
Availability: One week notice

EXPERIENCE BACKGROUND

About 17 years been in the Oil and Gas Construction Industry for upstream and down stream works. Involved in erection, fabrication and testing of steel structural, piping (carbon steel and low alloy steel), pressure vessel, gas and oil pipeline, offshore laybarge, offshore platform upgrading work and new refinery plants.
Build up the career starting with Training QC Inspector for Structural, NDT and Piping works. Lately for the past 4 years been as General Inspector post for Petronas Carigali, Exxonmobil (EMDC), Reliance Industries of India and Murphy Oil of Malaysia. Mainly work scope are inspection, installation and erection, monitoring for steel structure/piping fabrication of topsides modules and jackets, refinery plants, vessel, pipelines, FSO and subsea structure, piping and pipelines.
Work Site – AY Engineering, Promet Fabricator, Sime Sembcorp Engineering and Malaysia Shipyard and Engineering all are located at Johore state. The other location were at Naval Dockyard and KHL Engineering at Lumut Perak, Geahin Engineering at Malacca, Kerteh Oil and Gas Terminal at Kerteh Terengganu, GPP 5 and 6 at Kerteh Terengganu, TNB Power Station at Kapar Selangor and LNG 1 at Bintulu Sarawak.
As a General Inspector, the work scope are depending on service contracts.
Scope of work briefly:
* Witnessed Welding Procedure Qualification Test and welder qualification test.
* Experience in welding inspection on piping materials such as Stainless Steel L316 and 304, Chrome-Moly and Incoloy.
* Reviewed all procedures including welding and NDT procedures.
* Able to read ISO, P&ID and GA drawings.
* Perform site quality activities in accordance with Project quality Plan.
* Work with QA/QC Lead to address Project Inspection requirements.
* Implement quality surveillance and inspection activities at construction site both for structure and piping.
* Undertake stage inspection and monitor production process for structure and piping.
* Review contractors and suppliers completion files for accuracy and adequacy.
* Attend and contribute to site and project technical meeting as necessary.
* Ensure materials (structure and piping) supplied meet the requirements of the project specifications.
* Follow the safety rules and practices and assist the site team in promoting site safety.
* Review factory acceptance test and on final quality check prior to shipment.
* Monitor and appraise suppliers and contractors Quality Assurance and Quality control activities.
* Provide early warning of potential quality problems.
* Set up personnel's for site team.
* Set up project QC work execution plan.
* Coordinate daily inspection activities for various discipline.
* Site QC surveillance during construction activity for quality control compliance verification.
Documents Review
Review the project documents such as Project Quality Plan (PQP), Inspection and Test Plan (ITP), QA documents procedure such as NDT procedures, welding procedures, welding consumables control, mechanical test, record of welder performance, IFC and as built drawings, flushing, hydrotest, reinstatement procedures, distortion control procedure, Arc burn control procedure and etc.

Management Involvement
Participated in weekly QA/QC meeting, monitor of NCRs and follow up the close out, keep the QC matters update to QA/QC Lead, give the QC input for progress report and update. Participated in Company/contractor internal audit programmed and problem solving on QC matters.

Code and Standard
Familiar with AWS D1.1, ASME 1X and V, API RP2X, API RP2W/2Z, API 1104 and ANSI B31.3.

Personal Touch
Strength - Teamwork, good communication and ability to analyze.
Expectation - Construction Supervisor and QA Engineer.
Hobby - Soccer and badminton.

Job Attachment Currently
March 2008 – Present
* Fabrication of Murphy Sabah Oil Company Kikeh Subsea Gas Pipeline End Termination (PLET) at Aker Kvaerner Yard Pulau Indah, Pelabuhan Klang, Malaysia.
Appointed as Senior Fabrication Inspector seconded to Murphy Sabah Oil Co.

Work Scope
Reports to Company Site Representative for job progress updating.
Close monitoring on construction and NDT progress base on client and project procedures.
Familiarize with applicable Codes, Standards and Client Specification and also reviewed the approved drawing for the project.
Monitor the QC matter accordingly as per ITP/PQP.
Close monitoring on construction progress structure and piping duplex stainless steel base on client and project procedures.
Coordinate work of the site inspectors.
Issuance of CAR/NCR and follow-up until close-up.
Keep CSR updated with actions and quality issues.
Highlight the issue on upfront stage.
Reviewed all welding certificates including WPS, PQR and welder certificates and also all welding equipments calibration certificates such as welding machine, backing and holding oven and also the PWHT machine.
Carried-out material receiving inspection both structure and piping duplex stainless steel (checked size, type and condition of the materials) and make sure received a copy of genuine Mill Certificates.
Checked the consumables size, type and condition. Incase Basic Electrodes make sure the electrodes were baked as per manufacture recommended. And also check batch certificate for TIG filler wire.
Monitor and carried-out fit-up inspection both structure and piping duplex stainless steel.
Monitor the pre-heating and checked the pre-heat temperature prior welding.
Checked the welding position, weaving size and welding parameter such as current, voltage and travel speed as per approved WPS both structure and piping stainless steel. For piping duplex stainless steel need to check also purging gas.
Checked the consumables and filler wire condition and storage.
Checked the inter pass temperature and make sure the inter pass temperature as per recommended WPS.
Checked safety during welding.
Monitored construction punchlist and line check, outstanding work to carry over and monitor close up.
Checked the cleanliness of the joints must free from spatter, oil or grease and checked the welder and joint identification prior to visual inspection and NDT.
Carried-out visual inspection on both structure and piping, witnessed NDT activities and reviewed RT films.
Monitor compiling of final documentations.

WORKING HISTORY BRIEFLY

May2007 – Feb2008 Fabrication of Reliance KG-D6 Subsea Structure and Piping for Reliance Industries of India at KHL yard, Lumut, Malaysia.
Appointed as NDT/Welding Inspector seconded to Bechtel PMC as a representative to Reliance Industries of India.

2006 –2007 Installation of Sumandak B Pipeline.
Baram pipeline replacement (Baram-A to Baram-G)
10km offshore pipeline replacement from MCOT to West Lutong platform at Sarawak Water Malaysia.
Installation of Sumandak-A platform and 10 km offshore pipe laying at Labuan, Malaysia.
Installation of Abu Cluster A jacket, topside and for Petronas Carigali Sdn. Bhd (Abu Cluster Project) at Terengganu water, Malaysia.
All of the above project were appointed as NDT/General
Inspector represented Petronas Carigali Sdn Bhd.

2005 - 2006 Fabrication of Jacket and Topside for Petronas Carigali Sdn. Bhd (Abu Cluster Project) at Ramunia Fabricator Bhd, Teluk Ramunia Johore, Malaysia.
Appointed as NDT supervisor represented Ramunia Fabricator Bhd Johor Malaysia.

2004 – 2005 Exxonmobil (EMDC) Producing Nigeria Oil (YOHO Topside Modules). Fabrication at Sime Sembcorp Engineering Pasir Gudang, Johore. Saipem.Sa as a main contractor (EPC-2)
Appointed as General Inspector represented Exxonmobil.

2003 – 2004 Exxonmobil (EMDC) Producing Angola Oil (Kizomba-B DrillingRig). Fabrication at Malaysia Shipyard and Engineering Pasir Gudang, Johore.Daewoo of South Korea as a main contractor (EPC-1).
Appointed as a General Inspector represented Exxonmobil.

2002-2003 Fabrication of Bintang-A and B Tripod Jackets and Topsides for EPMI at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of B11DR-A 6 Legs Jacket for Sarawak Shell Bhd at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of JNDR-A 6 Legs Jacket for Sarawak Shell Bhd at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of Tapis-F Tripod Jacket and Topside for aEPMI at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of B11P-A Topside, Modules, Living Quartes, Bridge and Flare Tower for Sarawak Shell Bhd at Sime Sembcorp PAsir Gudang Johore.
Fabrication of ANDP-C and E Tripod Jackets and Topsides for Petronas Carigali at Sime Sembcorp Pasir Gudang Johore.
Fabrication of YOHO Topside Development Project for Exxonmobil (EMDC) at Sime Sembcorp Engineering Pasir Gudang Johore.
All the above projects work as Ultrasonic Inspector
Represented Sime Sembcorp Engineering Pasir Gudang
Johor, Malaysia.

2001-2001 MTBE Propylene Plant at Kuantan, Pahang. Work as Ultrasonic Inspector on the Annual Shutdown represented MTBE Kuantan Pahang, Malaysia.

2001-2001 Installation of South Furious Barton Compression Module for Sarawak Shell Bhd at Sarawak offshore. Work as Structural QC Inspector represented GLOBAL/TL Offshore.

2000-2000 Fabrication of ANGSI-A Topside, Living Quarters and Modules for Petronas Carigali at Sime Sembcorp Pasir Gudang, Johore.
Work as NDT Coordinator represented Sime Sembcorp Pasir Gudang Johore, Malaysia.

2000-2000 Installation of ANDR-A Platform for Petronas Carigali at Terengganu offshore. Work as General inspector represented Petronas Carigali.

1999-2000 Fabrication of Resak Onshore Gas Terminal for Petronas Carigali at Kerteh Terengganu. Work as NDT Inspector represented Petronas Carigali.

1998-1999 Fabrication of Resak Branang Topside, MSF and Living Quarters for Petronas Carigali at Sime Sembawang Engineering Pasir Gudang, Johore. Work as UT Inspector represented Sime Sembawang Engineering Pasir Gudang Johore, Malaysia.

Fabrication of Anding-A Tripod Jacket and Topside for Petronas Carigali at Malaysia Shipyard and Engineering Pasir Gudang, Johore. Work as UT Inspector represented MSE Malaysia.

1998-1998 Fabrication of Hong Kong Airport Structure at Geahin Engineering Sdn Bhd Malacca. Work as Ultrasonic Inspector represented Geahin Engineering Sdn Bhd.

1996-1998 Fabrication of Container Cranes at Naval Dockyard Lumut, Perak. Work as a 3rd Party Surveyor for Bureau Veritas Kuala Lumpur.

1995-1996 Fabrication of ASME Code Pressure Vessel at Taylor Wharton, Shah Alam Selangor. Work as NDT Coordinator represented Taylor Wharton Shah Alam.

1995-1995 LNG 1 at Bintulu Sarawak Annual Shutdown. Work as Eddy
Current Technician testing Exchanger Tubing.

1994-1995 Fabrication of Seligi C and E Jackets for EPMI at Malaysia Shipyard and Engineering Pasir Gudang, Johore. Work as QC Inspector represented MSE Johore.

1993-1994 Fabrication of M1 Living Quarters for Sarawak Shell Bhd at Promet Fabricator Teluk Ramunia, Johore. Work as Structural QC Inspector represented Promet Fabricator, Malaysia.

1992-1993 Fabrication of Tembungo-A Jacket and Topside for Petronas
Carigali at AY Engineering Teluk Ramunia, Johore. Work as
Training Structural QC Inspector represented AY Engineering.

1991-1992 Fabrication of piping and structural work (spherical tanks) for
Mechmar Keppel Engineering Sdn Bhd at Klang Port Selangor. Work as NDT Trainee (UT,RT and MPI) represented Mechmar Keepel Engineering Sdn Bhd, Malaysia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 4812)

Go to Search Parameters...

Brief Description

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

I'm a metal fabricator/ Boilermaker/welder. My work consists mainly of reading and interpreting blueprints or welding process specification, operating manual semiautomatic welding equipment to fuse metal segments using processes such as MIG, TIG,MAG, ARC welding, resistance welding etc......

Heavy equipments mechanical engineer

Instrument supervisor / technician v exp construction commissioning start up HSE

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

JOHN MARDEN - MARKETING AND NEW BUSINESS DEVELOPMENT LEADER

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

Mechanical engineer striving for excellence and challenges

Primavera Project Planning Mining, Oil and Gas

Changing career to obtain a challenging acad drafter position in which creativity, technical skills, and educational preparation can be utilized and enhance.

I am very interested in obtaining a position with your organization. Enclosed please find my resume for your review.

Over 18 years' experience in design and construction of water & wastewater treatment projects - industrial & municipal

Highly organized, self-motivated individual with experience in the Automotive Electronic Equipments maintenance, repair and troubleshooting, Computer and Data/Voice Communication industry.

Civil Engineer for Construction/Excution, Billing, Analysis of Rate, Quantity Survey

Creative and reliable engineering Personal with a strong technical backgrounds including data handling, maintenance and servicing of equipment and machines.

Seeking Construction employment opportunities.

Maintains books of accounts (Journals, Ledgers, Trial Balance and Balance Sheet etc.). Prepares all vouchers (payment, receipts and journal) and ensures proper charging and posting of expenses against appropriate budget lines. Supplier and sub-con (Local, Foreign) bills checking and payment.

can survey construction, road, site development, building, pipeline, airways and can established control.

B.Tech Engineer with an heavy equipment experience.

B. Sc. in Civil Engineering & MBA in Riyadh, Saudi Arabia

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Over 7 years of experiences in Project Planning, Project Control, Project Coordination for Oil and Gas Projects, Refinery and Gas Turbine Power Plant ,B.E in Civil Eng.,Certificate course in Primavera Ver . P3, Pe/c Ver.3.5 and Pe/c Ver 5.0,MS Project and MS office applications,AutoCAD 2000

Experience in software is the leading developer of computer-assisted thinking programs for businesses in the field of project planning, problem solving, and negotiating.

Maintenance mechanic

Diploma Information Technology-lay utp cable and fiber optics cable,terminate utp cable and splice fiber optics cable,install wireless

A Chemical Engineer with 10 years of experience in Procurement in Oil/Gas and Minerals Industry

I have Bachelors Degree in Mechanical Engineering with 18 years Experience India, Middle East and African countries in Oil, Gas sector both onshore and offshore fields.

Senior EPC/EPCM Manager with +30 years experience of successful multi-disciplined project & program management; successfully organizing, managing and directing large mining, heavy civil and infrastructure projects

Certificate in Project Management Course from IIT Delhi B.E (Mechanical) 2000, Diploma: D.M.E. 1997, Mumbai BoardPrimavera, CEASARII (Ver. 4.4)

BE electrical, Micro Station, AutoCAD and MS Office

Experienced oil/gas/mining/heavy civil project manager. Currently PMT Construction Manager on $8.5 billion dollar project.

Experience includes project management, construction management, geotechnical engineering, engineering design and resident engineering construction observation.

SUPERVISOR AUTOMOTIVE FACTORY, RESIDENTUAL / COMMERICAL SUPERINTENDENT

B.S. Mechanical Engineer. Member of Mechanical Engineer’s Chamber / TURKEY; Qualifications : Bachelor of Science in Mechanical Engineering (University of Anadolu / TURKEY 1980-1984) , Certified Welding Inspector ( CSWIP 3.1, Cert No: 37291, E

I am Rosalie A, Aguzar proficient in Architectural Plans using Autocad with basic knowledge on 3ds Max (Architectural Design), Revit 2009 & Sketchup.

Project Interface Manager, Stategy Planning, Engineering/Projects Development/Management/Controls

I am a diploma holder in mechanical engineering and more than 9years experiance inthe field of fabrication

Having worked in three countries in industries such as: Printing, Tourism, Piping Fabrication, Oil and Gas construction and erection projects

i am a new zealand registered electricain , my apprentiship was in substation construction and maintaince which i completed in 2006 .I currently live in london but will be moving to melbourne in the new year

Job Title : Service, Erection and Maintenance Engineer - Maintenance & Trouble shooting skills - Installation, Repair, commissioning and STart Up of Boilers. Stron Communication Skills. Training Courses

Continuous opportunity for professional development in the field of Manangement and Business Administration, Banking and Marketing as well as Procurement and Logistics.

I am working in oil, gas and offshore projects and plants from 14 yrs in india, middle east and europe for multinationals for erection, commissioing and projects.

I have a Masters degree in Civil Engineering. I am seeking a job in the industry to apply skills obtained throughout my training and thereby improve my own abilities and achieve better understanding of the diverse field of Civil Engineering.

Application of specialized softwares for engineering design with opportunities in project leadership

Looks forward to a challenging career as a Engineer in Oil, Gas, Petrochemical, Fertilizer, Power, Nuclear and Chemical related heavy process equipments fabrication, machining and Construction industries. In depth knowledge in Construction industries and process industries.

Civil engineer who is familiar with all aspects of concrete and steel structures, design and analysis , high rise building , finite-elements method and last software packages in structural analysis. Executive sector of the great projects for water distribution and its related pumping stations

Career Objective I am looking forward to develop my academic background and career related experience in Construction field.

Ingegnere Meccanico, laureato a Pisa con Master of Science in Metallurgical and Materials Engineering dalla Colorado School of Mines, Golden, CO USA. Italiano come madre lingua, ottimo Inglese, Francese, Tedesco e Spagnolo colloquial

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out