Resume - Presently I am working in Wade Adams Dubai As a Health&Safety Officer

Misco Jobs

Resume #81260

CONTACT INFORMATION:
View contact information...

Experience: 5 Yrs
Post: HEALTH&SAFETY OFFICER

OBJECTIVE
To seek a challenging position of strategic importance, by making contributions to the organization, by best of my abilities and developing my own skills during interaction. My Motto in life is "Problems are opportunities and never accept defeat in life".

WORK EXPERIENCE (Total Experience: around 5 years):

1) Currently Working as a "Health&Safety Officer" in "Wade Adams Contracting LLC. Dubai (UAE)" From 20th November 2007 to till date.

2) Worked as a "Health&Safety Officer" in "USHA MARTINE LIMITED.
Jharkhand (India)"since 25th Aug 2004 to till 4th November 2007.

Strenths:-

* Develop, monitor and evaluate occupational health, safety and environment plans/programs for the project activities to ensure compliance with applicable regulation, client requirement and international best practices; evaluate, modify and implement alternative methods for achieving desired goals.
* Provide technical support in annual audits and periodic evaluation of work environment as per requirement of OHSAS 18001:1999, ISO 14001:2004 & ISO 9001-2000.
* Management of subcontractor, vendors and supplier with respect to HSE issues.
* Reviewing subcontractor documents for assessing their HSE capability.
* Coordinate and supervise assigned programs including but not limited to occupational safety and hygiene, fire safety, radiation safety environmental issues etc.
* Serve as technical consultant to faculty in health safety & environment management issues and liaisoning with client, consultant and other agencies in HSE issues.
* Ensure and document company's compliance with mandatory HSE requirements and bring to management's attention areas of deficiency Develop and implement HSE training and educational programs, safety meeting, workshops etc.
* Assists top management in planning and setting goals for effective control over occupational hazards, loss management etc.
* Doing Risk assessment, identification and locating hazards, recommendation of corrective and preventive measures, Hazard and Effect Management Plan (HEMP).
* Preparing and implementing Contingency Plan (Fire, Spill etc), conducting Mock drill (Dry and Wet)
* Accident / Incident investigation and analysis, recommendation of corrective and preventive measures.
* Safety Presentation, Reports to Management, HSE Statistics and analysis of data.
* Safety Walk about, inspection of workplace and facilities, safety survey.
* Safety Performance monitoring and appraisal of employees.
* Environmental inspection, audit and waste management.

Summary: 5 years of Experience in Construction Field as Health&Safety Officer.

1) Organization: Wade Adams Contracting LLC, Dubai
EXPERIENCE: Currently working as "Health&Safety Officer"
from 20th November 2007 to till date.
Project Details:

Sir Baniyas Hotel Development Internal & External Work(Abudhabi)

Client: - Tourism Development Investment Company(TDIC)
Project management Team: - i) Leighton Asia Contracting LLC
ii) Turner & Tounsend(T&T)

Consultant: - NORR

Mirdiff Villas & Building (Roads & Infrastructure works)(Dubai)

Client: - Dubai Properties
Project Management Team: - Mace International
Consultant: - Cansult Maunsel /AECOM

Duties: -

ƒæ Provides safety information, support and mentorship to operation personnel and other internal clients to ensure the conduct of safe and hygienic work practices.

ƒæ To comply work the safety law, norms and standards.
ƒæ To collect and maintain data information regarding frequency and severity of accident.

ƒæ To formulate suitable safety policies and programmers.

ƒæ Prepare HSE Objectives and Programe for project specific Identify Competence

ƒæ To report regularly on safety performance as well as accident trends.

ƒæ To ensure that personal protective equipments are in working conditions and being use by workers in hazardous situations.

ƒæ Assists with development and implementation of safe operating and emergency procedures, manuals bulletins and other safety publications.

ƒæ Takes an active role in the development and implementation of the permit to work system and provides independent oversight by reviewing selected permits issued by operations personnel's.

ƒæ Assist with the development and conduct of safety training course.

ƒæ To include the spirit of safety among workers by launching safety campaigns in the form of observing safety weeks and through other audio-visual aids including arranging contests, talks and seminar on safety.

ƒæ To coordinate and motivate the safety educational and training programmers among workers.

ƒæ Conducts regular facility safety inspections of operating plant and equipment as well as new projects/ modification under construction, prior to mechanical acceptance start up.

ƒæ Participates in audits of safety program implementation.

ƒæ Participates in incident control during accident or emergencies.

ƒæ Leads and participates in incident investigations, including near misses property damage, injuries, occupational illness and spills/ loss of containment

ƒæ Assists with the development and maintenance of computer based incident records keeping system.

ƒæ Ensure that safety equipment and facilities are kept in best working condition by developing and implementing equipment inspection, and preventive maintenance program, setting up efficient record keeping systems of all equipments under his responsibilities and recommend the replacements of faulty equipments.

ƒæ Participates in safety reviews as required.

ƒæ Includes Hazop, what if, case and effects reviews

ƒæ To identify hazardous zones in the work places with suitable demarcation of such zones.

ƒæ Assists with industrial hygiene survey to identify and quantify occupational workplace stresses.

ƒæ Keep abreast if new developments safe working practices, government regulations and relevant international codes of practice.

ƒæ Participates in local industry associations committees or work group and liaises with counterparts at other to facilities identify areas where the company might benefit by adopting best practices.

2) Organization: USHA MARTINE LIMITED, Jharkhand

EXPERIENCE: Worked as a "Health&Safety Officer" Since 25th Aug 2004 to till
4th November 2007.

Trainings in: -
* Fire Fighting
* Confined Space
* Lock Out/ Tag Out
* Excavation
* First Aid Training

EDUCATIONAL QUALIFICATIONS

Name of Exam Board/University Year of passing Division
Matriculation B.S.E.B., Patna 1999 2nd Div
Diploma in Mechanical Engineering Ranchi University(Jharkhand) 2003 1st Class
Diploma in Safety Engineering University of Newcastle(Dubai) 2008 1st class
TECHNICAL SKILLS:
Successfully Completed One Year Diploma In Industrial Safety Management From Rashtrya Technical Institute (RTI) In The Year Of 2004.

Computer Skill: Windows 98/2000/XP/Vista, Auto CAD 2006,
MS Word,MS Excel, Ms PowerPoint

PERSONAL DETAILS: -
Date of Birth: 4th Jan 1984
Marital Status: Unmarried
Religion: Islam
Gender: Male
Language Proficiency: Hindi, English, Urdu
Hobbies: Travelling, Playing Cricket &
Making new friends.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 4814)

Go to Search Parameters...

Brief Description

3 years diploma in mechanical engineering

LAND SURVEYOR

MicroStation 3D Modeler

Knowlegeable on 2D&3D AutoCAD Drafting, ArchiCAD, Vectorworks, Photoshop, Office Apllication, - Word and Excel, Outlook , Internet, Manual and Computerized Rendering, Mechanical/ Conveyor Technology (as per ASTM, ISO, JIS, and Other Drawing Standards), well versed on the English System Units.

Electrical Project Manager 20+ years experience

Master Operator with exceptional work ethic.

MapInfo professional 6.0, 8.0, 8.5,,Schema BTS Ultima,TEMS investigation 3.1, 4.1, 5.1, 6.1.3 Agilent, Nemo for drive test (Data collecting tools

Bachelor of Science in Construction Management,National Certificate in Construction studie· Advanced in AutoCAD 2006. Broad knowledge of building trades. Carpentry, Plastering ,Tiling, Plumbing

NDT Level II Magnetic Inspection and Penetrant Inspection

To achieve a job as ¡§Safety Professional¡¨ in an augustive organization where I can deliver the best of my performance implementing managements safety policies and procedures

I am a certified lead auditor in ISO ¡V 9001, OHSAS 18001, ISO 14001 standards.

Have worked in all departments of construction project sites, well knowledge in computers

Licensed Civil Engineer, exposure to project / construction management for 8 years, assigned to do field and office engineering works like field inspection, work monitoring, and cost estimates for 3 years, familiar with basic forms of contracts-FIDIC, CIAP, computer literate - MS office application

I¡¦m a B.E.,(Mechanical Engineering) graduate, graduated from Bharathiar University, Coimbatore (South India) with First class during the year 1992. I have a rich 12+ years of experience in various fields mainly in the area of projects Execution.

I AM A MECHANICAL ENGINEER WITH 8 YRS EXP IN MANAGING PROJECTSITES AT BPCL,IPCL IN INDIA,FABRICATION AND ERECTION OF PIPELINE,MAITENANCE OF PIPELINE ERECTION OF EQUIPMENT PRESENTLY IN DUBAI ON VISIT VISA AND LOOKING FOR EMPLOYMENT IN UAE.CAN SPEAK BOTH ENGLISH AND RUSSIAN LANGUAGE.

Target oriented professional with excellent leadership skills, proactive attitude and mastering strong inter-personal relations with people of different cultures.

worked as junior engineer on various projects around the world. Adapt easily to harsh conditions.

I am searching for employment with a company that has satiability and longevity.

Total Experience is of twelve Years encompassing Senior Civil Engineer for Eight Years and Site Engineer for Five years and as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

Over Ten (10) Years of solid working experience in the sales and customer service environments for Radiology Equipment & Spare parts, Laboratories Equipment & Accessories, Nuclear Medicine, and QC/QA Test Tools. Maintain excellent customer service skills and a proven record as a top sales performer.

20 yrs exp residential contractor

Mechanical engineer with nearly 13 yrs experience in petrochemicals and power plants as project and maintanence engineer

MICROSTATION V8

Passed the licensure examination for Civil Engineers last May 2008. Have 1-yr experience in construction managament. Have knowledge on Excel and CAD Programs. Hard working. Good in oral and communications skill.

3 years working in the construction site with arabtec u.a.e. projects such as dubai airport, DIFC, and now in infinity tower

Skilled painter with experience in the industry.

ERECTION AND COMMISSIONING ACTIVITES

Senior Estimation Engineer for oil and gas construction projects

Circa 30 years work experience (10 years Middle-East / Africa)

25+ years Upstream Project Controls Management across all stages of Oil & Gas E&P Business Process Life Cycle:

Presently I am working in Wade Adams Dubai As a Health&Safety Officer

M.E. Civil in Transportation Engineer with I-Class

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.

Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT

Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.

Implementation Manager or Technical Project manager

Interprets plans, conducting quality control as inspector, preparing welding procedures as a welding engineer, and controlling/monitoring project activities/ preparing documents for the fabrication of boiler components shall hopefully contribute to your requirements.

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

for a vacancy in your organization for Quantity Surveyor / Civil Engineer.

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.

Contracts Engineer, Cost Engineer, Quantity Surveyor

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Graduate Civil Engineer working as Senior Quantity Surveyor with over 13 years of experience in construction industry ranging from Bridges, Highways and Building structures. I have also been designated as a Certified Cost Engineer by the AACEI in October 2008. Well versed with FIDIC, CESSM3 & POMI

I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out