Resume - Bachelor in Engineering - Metallurgical Engineering.

Misco Jobs

Resume #81421

CONTACT INFORMATION:
View contact information...

Objective:
To obtain a position in the Engineering Service Industry, where I can utilize my previous work experience and expertise to advance in to upper level management.

Education:
Degree: Bachelor of Engineering (B.E.)
Branch: Metallurgy
College: Faculty Of Technology & Engineering
University: Maharaja Sayajirao University, Vadodara, Gujarat, India.

Work Experience:

Name of the company: Elecon Engineering Company Limited,
Location: Vallabh Vidyanagar, State: Gujarat, Country: India.
Company is engaged in Heavy Engineering Equipment Manufacturing i.e. Material Handling Equipments like stacker reclaimer, loader – unloader, long material conveying systems and Industrial Power Reduction Gear Boxes.

Positions & Working duration:

Senior Manager:
2004 Onwards.
Along with above responsibilities added responsibilities given were over all In-charge of Heat Treatment Shop, Metallurgical Quality Control & Material Testing Laboratory i.e. Metallography, Mechanical testing of Metallic material & Chemical analysis of Metallic Material.
Deputed as Coordinator to Management Representative for ISO 9001 implementation and Maintenance in the entire organization. Document preparation and implementation at all stages.
Deputed as Technical Manager & Quality Manager to implement & maintain the accreditation of Material Testing Laboratory according to ISO / IEC 17025. Document preparation, authorization, distribution & implementation within the laboratory.
Vendor development, educating them for QMS & TQM etc.

Manager:
1998 to 2004.
Along with above said responsibilities the added responsibilities for Quality Control at Inward stage, Process stage and final stage added for Metallurgical and Dimensional. Here also take care of Hardness & Dimension measuring instruments and metallurgical microscope with image analyzer. Process improvement, validation etc. to achieve & fulfill customer requirement. Write down the SOP and implement in the routine work..

Deputy Manager:
1988 to 1998.
During this period along with above said responsibilities worked for process improvement and establishment. Here I have change the process parameters, accessories etc. to achieve consistent quality with minimum cost & rejection or rework. This effort produces effective process cost reduction to the 30% i.e. saving in electricity and consumables and reduction in process cycle time i.e. productivity increased by 12%. Process improvement with process cost reduction.

Technical Executive:
1984 to 1988.
During this period along with Junior Engineer responsibilities worked for fixture selection (here I have recommend to change the material of fixture from Mild steel to Heat Resisting steel) which gave maximum utilization, improved output, improved life of fixture, minimum distortion, reduction in process cost and reduction in rejection cost etc. Planning & Production responsibilities.

Junior Engineer:
1980 to 1984.
During this period I have to look after the day to day working of Heat Treatment shop. Maintaining and updating log book with day to day working. Supervising the workmen and routine work and controlling various processes like Carburising, Hardening, Tempering, Annealing, Isothermal Annealing Pearlitizing, Normalizing, Stress Relieving etc. Here worked in all the three shifts.

Technical Apprentice:
1979 to 1980.
During this period I have been trained to work on shop floor in Heat Treatment shop.

Additional Responsibilities:

Assisting / helping / guiding in vendor development for bought out items for the organization.

Educating, developing and helping in upgrading the subcontractors to comply with the specified requirements.

Helping for establish TQM / QMS at vendor end.

Assisting / guiding Design & Development Department for selection of material & heat treatment according to the application.

Carry out metallurgical failure investigations and suggest remedies / changes in process sequence / material condition etc. to relevant department.

Maintaining all relevant documents for process, quality records and all test data in a proper manner that can be retrieve by all relevant easily as and when required.

Initiating budget proposals for testing equipments and other resources according to expansion plan, modernization, testing reliability improvement and effectiveness.

Managing fabrication of steel to steel, steel to alloy steel, steel / cast iron to non ferrous, steel to stainless steel.
Preparing, implementing & maintaining WPS, WPQ & PQR for various welding processes according to ASME SEC IX.

Personal: Marital status: Married
Children: One daughter & one son
US residential status: Green card holder, can work for any employer in United States.

References:

* Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 4805)

Go to Search Parameters...

Brief Description

Customer support , service engineer, bio medical engineer

Quantity Surveyor able to takeoff, variation claims, valuation, computers,caddrawing

Civil engineer

Architectural draughtsman, my experance is 8 yeairs completed and hands-on training with Architectural, Mechanical, Civil and Structural DraftingƒnExperienced with AutoCAD 2004 - 2009,Proficient with Windows: MS Word, MS Excel, MS Works, MS Outlook, MSƒnPowerPoint,

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

Phisicyst with Power Electronics specialization

Diploma civil engineer from Mumbai(1st class with distinction)have 23 years of actual field experience of executing various types of civil works in & around Mumbai & pune.I hereby attach my C.V.along with this letter for your consideration & evalution.

QA/QC/NDT inspector, trainer, or manager - structural steel, power piping, transmission pipelines and nuclear - AWS D1.1 QC-1 CWI, and level II in RT, UT, MT and PT per SNT-TC-1A - Computer literate -

University degree in Logistic's & Economics, 13 years hands on Middle East experience in all Procurement matters of small to huge EPC (design & built) Construction projects in public, defense & petrochemical works in both managerial & operational positions.

* Construction Project Manager * Engineering Design Manager * Civil/Structural Engineer

Diploma mechanical eng.

EHS Management Expert with 14+ years of Experience

I am 42 years old and Master Degree, currently I am still working for Valeinco as Logistic Manager and I ahave many experiences in Project Management such as Contract Services Manager, Project Manager and Project Coordinator and with my experiences I am confidence to be one of your candidate/staff.

Primavera P6/P3, MS Project, MS Office

NDT level II, piping fabrication and errection, welding inspection etc.

20 years of HR experience in recruitment, remuneration, pay structure development, performance management, job evaluation, benefits, organizational design, employee relations, database management, leadership, management, facilitation, coordination

Bachelor in Engineering - Metallurgical Engineering.

Preparation of Techno-Commercial Proposal for various LSTK Projects like, Refineries, Petro-Chemical Companies, Steel Plants, Power Plants, Oil Bulk Plants, Gas Plants, Substations, Cable Laying, Plant Utilities and Various Industrial Projects.

Developing logic’s with RSLogix 5, 500, 5000 For AB Controllers, Simatic Manager for Siemens and Unity Pro for Schneider.

Mechanical Engineer with 4 years experience

CA State Certified General Electrician(Journeyman) with some Instrumentation training in Process Controls

4 years working as storekeeper in Gulf countries. I am now currently employed in Butec- Qatar as storekeeper. I handled 5 sites in the project. I usually maintain and monitor of stocks, making receiving and purchase request in the system and issuing materials.

I am having more than 3 years experience in the field of construction ,troubleshooting and commissioning in istrumentation field.

F.S.C+Diploma in Refrageration And Air Conditioning 3years+autocad course

Registered Professional Engineer Experienced in Project Management and Construction

i am certificate hlder majoring in land surveying seeking for vacancies. Experience in building construction and infrastructure work for 11 years. Very famliar with all kind of surveying instrument Total Station. I have knowledge in AutoCAD Land Development Desktop.

5 years cad customisation autolisp, visual lisp, vb.net, structural design software development, connection design

Hotel&Resteraunt Management Certification Thomson Education Direct

Objective: Joining Challenge job in a progressive organization in which I can be best utilized and developed according to my abilities and performance efficiency.

DETAIL qa / q WORK IN PIPING

Construction Superintendent

Piping Designer, MicroStation, Power (Nuclear, Fossil, etc.), Petrochemical, Chemical, Heavy Industrial.

Construction Laborer Expert 0-2 years Customer Service Face-to-Face Support Expert 10+ years Engineering Applications / Technical Support Strong 5-10 years Engineering Electrical Strong 5-10 years Engineering Field Service Expert 10+ years Engineering Maintenance Expert 5-10 years

I am mechanical engineer having 17 years of experience in oil and gas construction industry both onshore and offshore. Currently located in Tunisia with petrofac for their onshore gas development project. I am well familiar in all standards and codes applicable for industry,

Accounts upto finalisation,Tally 7.2, MS Office ,Administration& Logistic , B Com

Extensive hands-on experience in construction project administration & accounting

Over 40 Years Quantity Surveying/Cost Estimating experience on projects in Ireland, England, Australia, Greece, Middle East and the USA. Largest project: Headed the US office working on King Khalid Military City , North Eastern Saudi Arabia ($6 Billion for the US Army Corps of Engineers)

Construction Manager/Superintendent in Design Build

20 years overseas experience

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

Qualified and experienced in the construction/engineering and agricultural sectors - seeking position in the Middle East in one of the above areas. British Passport holder.

I am a 58 year old Vietnam Veteran. I believe that safety comes first on the job-site, and it is of the utmost importance to do the job correctly the first time in a professional manner. I do not believe in problems only solutions.

I am a SHE Manager with 20 + years experience in the diverse aspects of Safety, having developed and implimented programmes on large construction sites Qualification wise I have completed my indentures a Plater welder and a 4 year Higher National Diploma in Safety Management

Seeking an Interesting and challenging position in Safety

Objective A challenging position with the opportunity for advancement in the field of Logistics, Warehousing and Distribution, utilizing extensive, practical skills and training gathered over 25 years experience in a logistics-based background.

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

I am a multi field Estimator, Designer and Project manager, Electrical and Mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

27 years experience in integration of controls, electrical construction and service. Management and installations of electrical systems including but not limited to: industrial & commercial installations, networking including fibre, power quality mediation, controls, S.C.A.D.A., …

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out