Resume - Piping Designer (HVAC Piping and Plumbing Systems)

Misco Jobs

Resume #81443

CONTACT INFORMATION:
View contact information...

Objective
To secure a position with a company that will utilize my skills in both the Mechanical Design Field and or the Information Systems/Technology field.

Experience

2001–Present U.S. Engineering Company Kansas City, MO

Information Systems Manager / Project Mechanical Detailer
(See descriptive Job summary below)

2000–2001 Joseph Davis Company Buffalo, New York

Project Mechanical Detailer / Project Engineer / Project Manager
- Detailed Mechanical Disciplines (Plumbing and HVAC Piping).
- Headed up the coordination process (all disciplines).
- Project Engineer / Manager duties while stationed at various job sites..

1996–2000 U.S. Engineering Company Kansas City, MO

Project Mechanical Detailer / Project Engineer
- Detailed Mechanical Disciplines (Plumbing and HVAC Piping)
- Headed up the coordination process (all disciplines).
- Project Engineer duties while stationed at various job sites (assisted Project Manager).

Education

1983- present Various Educational Seminars/Schools
1982 Defense Mapping School Fort Belvoir, VA
1981 Park Hill High School Kansas City, MO

Software AutoCAD 2007, QuickPen Piping CAD (I-draw), CadPipe, Pro-Pipe, Microsoft Server 2003, Microsoft Exchange 2003, Microsoft Office 2003, Microsoft Frontpage 2003, Microsoft Project 2003, Suretrak, Toolwatch, Act!, and others.

Project Mechanical Detailer / Project Engineer

Summary of Job:
To oversee the overall coordination process of a project as well as assist the Project Manager and Superintendants with needs they may have (submittals, RFI, SDI generation or any other assistance that may be required for a successful project).

Summary of Job responsibilities:
* Lead the overall coordination process of all trades / specialty contractors involved in a project
* Help generate fitting/pipe or fixture take-offs to insure a successful bulk buy.
* Detail and coordinate HVAC Piping and Plumbing accurately to insure the minimal amount of collisions during a project.
* Generate fabrication drawings to facilitate a quick and accurate installation of Mechanical Systems.
* Work with Project Manager to assist with submittals of Mechanical Equipment
* Generate RFI's, SDI or any other documentation addressing specific needs of a project to insure a successful project.
* Assist in any way needed as to insure a successful project

Summary of Job experience and knowledge:
* Strong Background in AutoCAD
* Good working knowledge of 3D software to help facilitate the coordination/fabrication process
* Strong understanding of project management/engineer duties
* Strong leadership skills.
* Excellent written and oral communication skills.
* Excellent interpersonal skills.
* Strong project drawing research skills all disciplines
* High level of self-motivation.
* Keen attention to detail.
* Proven analytical, evaluative and problem-solving abilities.
* Ability to effectively prioritize and execute tasks in a high-pressure environment.
* Exceptional customer service orientation.
* Extensive experience working in a team-oriented, collaborative environment.

Information Systems Manager

Summary of Job:
Responsible for the overall planning, organizing, and execution of all IT functions. This includes all information technology operations to meet customer requirements (end users) as well as the support and maintenance of existing applications and development of new technical solutions.

Summary of Job responsibilities:
* Lead the IT department's operational and strategic planning, including fostering innovation, planning projects and organizing and negotiating the allocation of resources.
* Manage the deployment, monitoring, maintenance, development, upgrade and support of all IT systems, including telecommunications, servers, PCs, operating systems, hardware, software, peripherals and Office Automation equipment.
* Benchmark, analyze, report on and make recommendations for the improvement and growth of the IT infrastructure and IT systems.
* Provide end-user services, including help desk and technical support services.
* Work with stakeholders to define business and systems requirements for new technology implementations.
* Keep current with the latest technologies.
* Assist in developing and implement all IT policies and procedures, including those for architecture, security, and disaster recovery.
* Develop requests for proposal.
* Manage asset management for IT hardware, software and equipment.
* Establish and maintain regular written and in-person communications with the organization's executives, department heads and end users regarding pertinent IT activities.
* Setup, maintain and monitor remote site to site VPN solutions to include implementing and managing an SSL appliance(s), hardware point to point solution(s) and also internet security appliance(s) (Firewalls).
* Setup, maintain, and monitor on site security/surveillance system (8 camera, Multi-plexing DVR solution)
* Maintain an IBM I-series as well as the X-series daily as well as disaster recovery backups

Summary of Job experience and knowledge:
* Seven years of related work experience.
* Strong technical knowledge of telecommunications, network and PC operating systems.
* Strong technical knowledge of current network hardware, protocols and standards.
* Extensive application support experience.
* Proven experience in IT infrastructure planning and development.
* In-depth knowledge of applicable data privacy practices and laws.
* Strong understanding of project management principles.
* Strong leadership skills.
* Excellent written and oral communication skills.
* Excellent interpersonal skills.
* Ability to conduct and direct research into IT issues and products as required.
* Ability to present ideas in business-friendly and user-friendly language.
* Ability to perform general mathematical calculations for the purpose of creating business cases, budgets and so on.
* High level of self-motivation.
* Keen attention to detail.
* Proven analytical, evaluative and problem-solving abilities.
* Ability to effectively prioritize and execute tasks in a high-pressure environment.
* Exceptional customer service orientation.
* Extensive experience working in a team-oriented, collaborative environment.

U.S. Army Veteran

June 1980 – April 1989 (Honorable Discharge)

Units
HHC 20th Engineer Brigade (Fort Bragg, North Carolina)
HHC 7th Engineer Brigade (Kornwestheim, Germany)
HHC 36th Engineer Group (Fort Benning, Georgia)

Primary MOS: 81BVP
Secondary MOS: 11BVP

Projects Overview

Large Jobs (3 years or greater, work performed on-site)

- Charles Evans Whittaker United States Federal Courthouse – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Metric job, generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space). Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- Children's Mercy Hospital In patient tower addition – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Medical Gases, Electrical and Fire Protection, Pneumatic Contractor) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- Sprint Campus – Overland Park, Kansas – Headed the coordination process (several buildings) for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades), various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space). Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- Kansas City International Airport Expansion/Remodel – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for Information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked with Project Management staff as well as Field personnel to insure that any needs were met to insure a safe successful project.

Medium Sized Jobs (2 years or greater, work performed on-site)

- University of Syracuse Boiler Room Expansion and Emergency Room Addition – Syracuse, New York – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Medical Gases, Electrical and Fire Protection, Pneumatic Contractor) to insure minimal conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

- Muelbach Hotel Remodel/Expansion – Kansas City, Missouri – Headed the coordination process (several buildings) for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal conflicts between the various disciplines (trades), various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space). Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- Hotel President Remodel – Kansas City, Missouri – Headed the coordination process (several buildings) for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades), various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space). Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- State Street Bank Data Center – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a part-time on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

- Attica School District Air Conditioning Addition – Attica, New York – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection, Pneumatic Contractor) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a part-time on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

Small Sized Jobs (1 year or greater, work performed on-site and in the office)

- Shawnee Mission West Air Conditioning Addition – Shawnee, Kansas – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a part-time on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

- St Joseph's Hospital Emergency Room Addition and area remodels (South) Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Medical Gases, Electrical and Fire Protection, Pneumatic Contractor) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- 909 Walnut Remodel – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a part-time on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

Industrial Jobs

- Marion Labs GLAT addition – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Worked as a on-site Project Engineer/Detailer and performed the day to day duties needed to insure a safe successful project.

- FMC conveyor addition – Lawrence, Kansas – Headed the coordination process for to insure minimal system installation conflicts between the various disciplines (trades). Worked as a on-site Project Engineer/Detailer and performed the day to day duties needed to insure a safe successful project.

- Pop Tart Plant – Muncy, Pennsylvania – Designed Pneumatic Conveying System and also headed the coordination process for to insure minimal system installation conflicts between the various disciplines (trades).

- Junior Mint Plant – Mexico – Designed Pneumatic Conveying System and also headed the coordination process for to insure minimal system installation conflicts between the various disciplines (trades).

- Ford Motor Company – Claycomo, Missouri – Various project layouts of several different types of systems, E-Coat, Air-Handler/ Unit Heater additions or area remodels, coordinated mechanical related systems around conveyors and other trades work.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 4806)

Go to Search Parameters...

Brief Description

A Senior Contract Specialist with 25 years international experience on most types of construction/engineering projects worldwide.

Climb and rescue certified Class II OSHA 30 hour construction C-Stop 10hr BOP-ARSC-OSHA-10hr. first aid certified CPR/AED adult certified Safety Inspections Quality Control NCCCO certification number: 070431577 Mobile Crane Operator Proficient on a computer (MS Word, Excel power point)

Over 13 years experience in positions including Project Engineer, Quality Control Engineer, Civil Engineer, Project Planner and Scheduler, Estimator, Crane Lift Supervisor, Welding Inspector, Land Surveyor and Draftsman. Nine years performance on U.S. Military Construction Programs

Piping Designer (HVAC Piping and Plumbing Systems)

Electrical Superintendent

More than 26 years of experience in this feild and capable of handling induvidual stores

Plumbing contractor and general contractor.

15- Years experience of selling Trucks, Construction, material handling and Agricultural tractors of Saudi Arabia

Bitumen storage terminal construction and all bitumen products manufacturing expereince

Mechanical building services design engineer. Experience in design HVAC, Plumbing & Fire Fighting along with site supervision and project management activities.

Instrumentation technician with 20+ years of experience

Mechanical Designer with over 20 years experience preparing process piping layouts, hydraulic and pneumatic schematics, isometrics, assembly, P&ID’s, and detail drawings, as well as laying out the placement of mechanical equipment. Adept at performing field walkdowns, surveys, and meeting with clie

Primavera Scheduler P3 to P6 and certified in P6

Electrical Engineer

To obtain a full or part time position as an Estimator with a growing company where my years of experience and professional skills will be utilized

Qualified applicant with years of experience in the material handling related to Oil & gas construction project. I have good knowledge of the methods, materials, equipments and tools used in the petrochemicals projects. Also conversant with ASTM and API specifications

Qualified Experienced Senior Construction Inspector

Qualifications include over 25 years experience in management/supervision positions on various domestic projects and various international projects in countries such as Iraq, China, United Arab Emirates, India, Saudi Arabia, Bahrain and in other locations such as Puerto Rico, US Virgin Islands etc

Project managemet, construction management

Professionally qualified and highly experienced Electromechanical Design/Senior Project Engineer offering over 26 years experience in the design, project management, installation, commissioning and maintenance of HVAC systems and associated electrical and control equipments.

15 years of working exp. looking for a change, having expertise in HVAC (chillers and chilled water system) and other mechanical system installation and commissioning, presently working in nigeria as a project manager.

Electrical Engineering. Hardware Design. Hardware/Software Testing. Hardware/Software Troubleshooting.

I have experience in procurement of contractors and consultants, contract administration using FIDIC conditions of contracts and highway designs. I have more than 15 years total experience in above fields.I can therefore engage as a project manager of a road and bridge project.

Senior Designer (Architectural)

I have more than 13 years Experience in Construction& Supervision of Highway& Road way

Thirteen years of problem solving, decision making, upward career progression and increasing responsibility. Extensive hands-on experience administering, planning and managing operations in the following functional areas: facilities management, project supervision, procurement, staff development, bu

Interested in moving back to Texas as a Quality Manager

Experienced Project Manager and proficient with AutoCAD, MS Word, MS Project, MS Excel, MS Powerpoint. Familiar and follow industry standards of the FDA, USDA, PHARMACEUTICAL and OSHA requirements. Experienced with real-time PMP methods.

TURRET PRESS AMADA EXPERT,ARIES,COMA,VELLA,PEGA,VIPROS,2510

Construction management/estimating/field supervision

I am currently employed within local goverment as a Roads Inspector. I have been employed in this position for nearly 5 years. I worked my way up from a maintenance road worker and have many years of skills and expertise in this field.

skilled tradesman. Mobile/Tower crane operator, Heavy duty equipment mechanic, Rigger, Inspector, Apprentice Millwright

An extensive career having an experienced blend of commercial and construction credentials in the engineering/infrastructure field including civil and mechanical engineering works involving co-ordination of consultants, contractors & public utilities, managing deadlines and optimising costs

A professional with 24 years of multi-functional & multi-ethnic/culture experience in Technical and Project Management areas. Experienced in handling multi projects, excellent communication skills & man management capabilities, team building, business road mapping, problem solving abilities

Masters degree management. 20+ years commercial/ heavy industrial construction. Carpenter based w/15 years management

Contracts Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience

Registered Mechanical engineer with heavy industrial, mining and USACE construction experience.

Detailed Structural designs of Civil Structures(RCC structure i,e, Buildings(Multi-storied office and residential), Roads, Bridges, Culverts, earth retaining structures(Retaining wall), Dams, rig & machinery foundations for Gas exploration

Presently working as Site Supt. Civil here in the construction of Khursaniyah Gas Plant (KGP) at NGL Trains 1 & 2, Saudi Arabia with Saudi ARAMCO. Representing the client in all civil works aspect of the work, I supervise two (2) major contractors-Bechtel/Technip Joint Venture.

I am confident and Expert; I am having 14 years experience with FIDIC contracts Worked on projects of Infrastructure Projects, Highway Roads, Bridges, Underpasses, Mechanical, Electrical, Water Work, Strom Water, Sub base Drainage, and Irrigation system, Construction of soft and hard Landscaping

Over 9+ years of experience in Portfolio management, Start stream TLM, Accounts, Operations & system automation.

Structural design of Post Tensioned Concrete Bridge, RCC High Rise Building, Tunnel, Highway Interchange Structure. Familiar with AASHTO LRFD, BS, ACI. Skilled in finite element softwares (MidasCIVIL, SAP, STAADPro, SAM-LEAP5 and AutoCAD). Specification, Report, AIP writing.

Free! Dear Sir untill now I have more than 9 years experience in construction, conversion & repair of the Supply Vessels, ULCC tankers, Tug Boats & Jack Up Drilling Rigs. 6 years experience as Project Engineer. Currently I work at the position of the Project Coordinator in ship repair.

Three years diploma in Civil Engineering (Technical Education Board of Punjab Pakistan)

13 years in quantity surveying

Dependable, motivated and organized hard worker who learns new procedures quickly, and meet schedules

Electrical estimator in industrial and commercial construction. Proficient in WinEst and Excel.

23 Years hands on construction/on site experience.MDP Project Management, Employed by EPCM company for 14 years prior to retrenchment, then focussed my attention on positions abroad.

Results-driven project and program management professional with first-rate skills in directing full cycles for complex, multi-site programs and initiatives. Proven ability to deliver substantial revenue, productivity, and quality improvements through well-managed, on-time projects.Particulary strong

30 plus years experience with heavy equipment both as an operator and supervisor.

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out