Resume - Forty+ years – Design of Piping Systems and Plant Layout for Nuclear and Convent...

Misco Jobs

Resume #81566

CONTACT INFORMATION:
View contact information...

EDUCATION:
Brooklyn Technical High School, Brooklyn, N. Y.
Indiana Institute of Technology and Columbia Basin College – one and one half (1½) years undergraduate study.

SUMMARY OF EXPERIENCE:
Forty+ years – Design of Piping Systems and Plant Layout for Nuclear and Conventional Power Stations and Petrochemical Facilities. Of that time, approximately, 10 years of this time was spent in developing 3D area models and system drawings for various companies and projects.
One and one half (1 ½) years – Craft Support for ASME I & C installations and inspection of non-ASME supports.
CAD OPERATIONS - 900 hours VersaCAD - 15000+ hours AutoCAD releases 9, 10, 11, 12 13, 14 (2D & 3D), 2000, 2004, and 2005 – Bentley/Rebis/Applications Development releases of ProPlant/ProPipe/AutoPlant (2D & 3D) and MicroStation95 & J and Bentley Plant Space Design Series (PSDS).

SIGNIFICANT EXPERIENCE:

NANA/WorleyParsons - November 2008 – February 2009
Anchorage, Alaska
SENIOR PIPING DESIGNER on contract
In-House design of piping packages for estimates and modifications for Fuel Gas Distribution for pad Building Heating using AutoCAD 2005.

NANA/Colt - November 2007 – October 2008
North Slope, Prudhoe Bay, Alaska
SENIOR PIPING DESIGNER on contract to BP
On-site design of Operations & Maintenance packages for pipe sleeve fabrication and installation and modifications to Flow Station, Gathering Center and Drill Site piping using AutoCAD 2005 and some Bentley/Rebis AutoPlant.

Bechtel National - October 2006 – October 2007
Richland, Washington
SENIOR PIPING DESIGNER on contract
Provided checking support for the Hanford Waste Treatment Plant (glassification) Some 3D modeling of piping system layouts, extracting piping isometrics, and P&ID's using Microstation J and Bentley Plant Space Design Series (PSDS)

VECO USA, Incorporated - March 2006 – October 2006
Bellingham, Washington
SENIOR PIPING DESIGNER on contract
Provided design for the general arrangements, piping layouts, piping isometrics and p&id's for the Waste Water Treatment Expansion Project at the ConocoPhillips refinery in Ferndale, Washington using AutoCAD2006, CAD Overlay and Bentley AutoPlant. On-site preparation of Turn-Around work packages for the Shell PSR in Anacortes, Washington

COLT ENGINEERING CORPORATION January 2005 – March 2006
Edmonton, Alberta, Canada
SENIOR PIPING DESIGNER – Designer/Checker on contract
Provided design and checking support for the general arrangements, piping layouts, piping isometrics and p&id's for the addition of an auxiliary VHP Boiler to an existing facility [ATCO Power] using AutoCAD 2004 and Bentley/Rebis AutoPlant. In addition, provided checking support for Colt/Core projects including BP Chemicals and Shell Chemicals using PDS and SmartPlant Review as a checking tool.

FLUOR DANIEL January 2001 – August 2002
Richland, Washington
SENIOR PIPING/MECHANICAL DESIGN ENGINEER on contract
Using AutoCAD 2D and 3D, provided construction piping design and mechanical support for the Spent Nuclear Fuel Project, DOE, Hanford (100K Area) facility. Some use of MicroStation95.

MIDDOUGH ASSOCIATES January 2001
Ashland, Kentucky
SENIOR PIPING DESIGNER on contract
Provided walk-down support of as-built systems at the Marathon Ashland Refinery.

RESOURCES CONSERVATION COMPANY August 2000 – September 2000
Bellevue, Washington
SENIOR DESIGNER on contract
Using Auto CAD and Rebis Autoplant97 provided piping design, plant layout and checking for Wastewater processing projects.

FLUOR DANIEL April 1999 – May 25 2000
Richland, Washington
SENIOR PIPING DESIGNER – temporary employee
Using AutoCAD 2D and 3D provided design support for the Spent Nuclear Fuel Project, DOE, Hanford (100K Area) facility, walked down As-Built systems and upgraded essential drawings. (Hanford Radiation Worker II trained and Initial 24 Hour Hazardous Material training)

SVERDRUP ENGINEERS June 1998 – January 1999
Tullahoma, Tennessee
SENIOR PIPING DESIGNER on contract
Performed in the design of vacuum jacketed Hydrogen and Oxygen supply and systems for a NASA rocket test stand in AutoCAD 2D and 3D.

ALLIED TECHNOLOGY GROUP October 1996 – March 1998
Richland, Washington
MECHANICAL DESIGNER/ CAD OPERATOR
Preliminary design of piping layout for a waste glassification facility, Using AutoCAD rel. 13 & 14 created 3D library of pipe fittings and equipment. Developed 3D model of glassification building, furnace, platforms and piping systems. Developed permit package drawings for a mixed waste disposal facility including 3D depiction of mixed waste vitrification building.

WASHINGTON PUBLIC POWER SUPPLY SYSTEM June 1989 – July 1995
Richland. Washington
SENIOR PIPING DESIGNER
On-site preparation and checking of drawings and sketches for BASIC DESIGN CHANGE PACKAGES using AutoCAD and Rebis/Pro- Series software in 2D and 3D in various areas of WNP-2.

WESTINGHOUSE HANFORD October 1988 – June 1989
Richland, Wa.
PIPING DESIGNER on contract
Preparation of drawings and sketches for N Reactor shut down and SAR requirements using AutoCAD.
Incorporation of documents to Essential Drawings

KEY TECHNOLOGY INC. May 1988 – October 1988
Milton-Freewater, Or.
CAD OPERATOR
Design and Drafting of Conveying Systems for the Food Industry using VersaCAD.

UNION CARBIDE CORP. February 1987 – December 1987
Moses Lake, Wa.
PIPING DESIGNER on contract
Design and Drafting of Piping and Plant Layout for new construction and modification of a Polysilicon Manufacturing Facility.

UNITED ENGINEERS and CONSTRUCTORS May 1979 – March 1986
Philadelphia, Pa.
LEAD PIPING DESIGNER
In-House – Preliminary design of the Boiler house for a Coal-fired Power Station.
Craft Support for the installation of ASME and B31.1 Piping, and Instrumentation at 2 Nuclear Power Station sites.
Initiation, Preparation and Resolution of Non-Conformance Reports and Design Change Packages. Supervision of a Design Document Incorporation Group.

WITCO CHEMICAL CORP. August 1978 – May 1979
Oakland. NJ
SENIOR PIPING DESIGNER
In-house and On-site Design of Piping Systems and Plant Layout for new construction and modification of existing Petrochemical Facilities.

AIR CORRECTION DIV, UOP INC. January 1978 – June 1978
Darien, Ct.
PIPING DESIGNER
Preparation of Flue Gas Desulfurization System Bid Packages and on-site start-up and craft support.

STONE and WEBSTER ENGINEERING CORP. September 1975 – December 1977
Boston, Ma.
PIPING DESIGNER
Piping Layout and Design both in-house and on-site for 2 Nuclear Power Stations.

M. W. KELLOGG July 1975 – September 1975
Houston, TX.
PIPING SENIOR DESIGNER
Preliminary design and checking for an Ammonia Generation Facility.

BECKER INDUSTRIES January 1975 – May 1975
Greenwich, Ct.
PIPING DESIGNER on contract
Piping layout for a Phosphoric Acid Generation Facility.

CRAWFORD and RUSSELL INC. June 1974 – December 1974
Stamford, Ct.
PIPING DESIGNER on contract
Layout and design of a Polymer Reactor area and Jacketed piping for Valox Conveyance.

CUNNINGHAM ENGINEERS INC. July 1973 – May 1974
Birmingham, Mi.
PIPING DESIGNER on contract
Piping layout for the trade sales section of a Paint Manufacturing Facility.

STONE and WEBSTER Engineering corp. December 1972 – July 1973
Boston, Ma.
PIPING DESIGNER on contract
Checking of ASME Pipe Spool Isometrics.

AMERICAN ELECTRIC POWER September 1972 – December 1972
New York, NY
PIPING DESIGNER on contract
Design and checking of Plant System Flow Diagrams.

GIBBS and HILL INC. August 1966 – September 1972
New York, NY
SENIOR PIPING DRAFTSMAN
Design, Layout and Drafting of Plant System Piping drawings, Composites, Flow Sheets and General Arrangements for various Fossil Fueled Power Stations.

TRAINING:
Columbia Basin College – VersaCAD (Certificate # 26150) 198 hours.
Columbia Basin College – AutoCAD 64 hours release 9.
Rebis/Applications Development Inc., Metaire, La – 160 hours Rebis/Pro-Series for Isometrics, Flow, Pipe, Plant, and Steel release 10, 10.2 & 10.3/11.
SpoCAD, Spokane, Wa. – 64 hours Advanced AutoCAD, AutoCAD rel. 11and AutoCAD rel. 12 upgrade

INDUSTRIES / TECHNOLOGIES EXPERIENCE:
AutoCAD Refinery Products & Gases Chemicals Revamp Coal Space & Defense
Commercial Facilities Start up Electronic Drawing Review Process Fossil
Plant Services Polymer Manufacturing Facilities Production/Pipelines Nuclear Petroleum Nuclear Plant Systems Plant Improvement Outage Petrochemicals

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 4758)

Go to Search Parameters...

Brief Description

I have 20+ years of experience in the EPC arena, specializing in Project Controls. I have extensive experience in CPM , EVM & ERP. I have 14 years of experience with Primavera Software (administrator & superuser with Primavera P3, P3c, P3e & Teamplay).

OBJECTIVE: To secure a position with a company, long term, that will allow me to use my over 24 years of experience in construction to benefit the company fully.

I am a fully qualified and experienced Project Mechanical / Piping Designer capable of handling a project from initial concept to final handover utilizing current software, design codes and procedures being used in the Pharmaceutical / Chemical Industry.

Over 25 years of successful industrial construction management experience including projects exceeding $100M. Expertise and solid record of accomplishments in jump-starting stalled developments.

Summary of qualifications * Over thirty years of experience in design, engineering, and manufacturing of aerospace, military, marine, and commercial equipment with emphases on robotics and automation.

36 plus years as pipeline construction inspection/consultant.

25+ Years Experience, from managing to "hands-on". Commercial, industrial, institutional, manufacturing, health care, data centers, and petro-chemical installations, ranging in size from small $100m tent finish to $10MM prison, are all included in my past experience/projects.

INTERNATIONAL EXPERIENCE IN AFRICA,LATIN AMERICA AND RUSSIA-Experienced professional with above average communication and technical skills seeks mechanical maintenance position. Available now-single status.

Geotechnical or Port and Coastal engineering

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

Instrumentation Engineer with 3 years experience

B.Tech Petro chemical Engineering and Diploma in Industrial safety with 3 years Experience

Electrician

Materials expertise, inventory,issue and received handler

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

Architecture CAD Drafter

Experienced project manager in landscape sectors, 25 years practical management experience in commercial and residential fields including high-end, M.Sc. and B.Sc. horticulture, M.B.A. pending

Quantity Surveyor

Land Surveyor

Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha, South Africa doing Hydraulic maintenance. Have been doing all buying and selling and sourcing of goods over internet. Also went to site to do job estimations and Representative work. Did Offshore Survival course

Diploma in Civil Engineering,Civil QA/QC inspector

Mechanical engineer, qa qc engineer, construction engineer

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

In the last 18 years, I have directed activities and managed more than 36 long-and short-term projects valued at $200,000 to $20 million. My range of activities have spanned from staffing to contract negotiations to OSHA inspections to client interaction to project turnover and completion.

All phases of I&E project design, construction, commisioning and start-up with experience spanning 20+ years

I have over 13 years experience within various safety environments with varying responsibilities.

FABRICATION MANAGER with 34 years’ experience in Heavy Engineering Manufacture/Construction for the Oil&Gas/Petrochemical/Desalination/Power Generation industries (both onshore and off-shore markets in the UK/France/Italy/Poland/Netherlands/Mid-East/West Africa

Forty+ years – Design of Piping Systems and Plant Layout for Nuclear and Conventional Power Stations and Petrochemical Facilities. Of that time, approximately, 10 years of this time was spent in developing 3D area models and system drawings for various companies and projects.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Graduate With @.5 Yrs of Sales Experience

Electrical design engineer, lighting designer, single line diagram, fire alarm systems, cctv, site engineer, mep coordinator

Estimator in Interior Fit Out/ Buidling Construction

Resident technical officer

Wth 3 yrs of experience in HVAC and completed B.Tech.

PLC HMI Programmer

A Site Area Manager presently on an overseas assignment with over 25 years of experience, a broad background in site construction, project management and contract administration. Highly developed people skills, interfacing with vendors, clients, owners and virtually all project stake-holders.

project management\coordination-planner in primavera concepts

Completed bachelor of engineering in electrical and electronics from V.T.U,Belgaum.India.presently working as installation testing and commisioning engineer for ADWEAs DMS project with siemens ag from 25-02-07.before i was worked as a operation and maintenance engr for 110substain for K.S.E.B.

1+ years of experience in Ideas NX as a design Engineer

Subject : Applying for the Land Surveyor post

Safety Officer, Mechenical / Electrical, 10 years exp

I recently qualified as an architect from Robert Gordon University, and am keen to join your highly reputed and internationally successful organization. It has always been my interest to be a member of a highly motivated team engaged in the design processes of medium to large scale projects.

Autocad operator (HVAC)

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

ERP, Consultancy, Movex, HumanResources Implementation, Payroll Implementation, Managment, Consulting Services, Independent

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

Construction Manager / Superintendent /Commercial

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out