Resume - Senior Geotechnical / Civil Engoneer

Misco Jobs

Resume #81569

CONTACT INFORMATION:
View contact information...

EDUCATION
October 2006 – October 2007 University of Birmingham Edgbaston, Birmingham, UK
Department of Civil Engineering
Degree: MSc in Geotechnical Engineering and Management
Course included: Ground Engineering (land contamination and remediation, ground improvement, soil reinforcement, tunneling design, dewatering and sustainability);
Foundation Engineering Design (Euro-code 8, pile and foundation design, bearing capacity of soil, earthquake);
Slope Stability and Retaining Structure (included studying the method of analyzing the stability of the slope and finding the reason of the landslide, giving a good remediation for stopping the landslide and creep, designing the retaining structure (Gabion wall, concrete wall) and designing the Sheet-pile));
Soil Mechanics (understanding the properties of the soil and the method of the test for finding the properties, analysis of the seepage, and knowledge about the consolidation of the soil);
Engineering Geology (geology of the ground, rock mechanics, and hazardous areas for construction);
Site Investigation; and
Construction Management
Dissertation research project: Effect of the fine under behavior of ballast under cyclic and static load with different moisture content
1997 – 2002 Tehran University Teheran, Iran
Department of Civil Engineering
Degree: Bachelor of Civil Engineering
Course included: Static, Dynamic, and Fluid Mechanics; Concrete Structures Design; Steel Structures Design; Structure Analysis; Foundation Engineering Design; Concrete Mix Design; Earthquake; Hydrology; Aggregates and Building Materials; Surveying; Mechanics of Rigid Body; Soil Mechanics; and Road Design.
Research projects: Concrete structure design; Steel structure design; Road designing; and Waste water management.

PROFESSIONAL CERTIFICATES
Track Accustomed Fire safety in London Underground (LUL)
Highways Safety Traffic management (Red book)
FWD Santos Card (Australia) CDM 2007

MEMBERSHIP IN THE INTERNATIONAL ORGANIZATIONS
August 2006 – present time The Midlands Geotechnical Society UK
2008 – Present time ICE UK
2006 – Present time American Civil Engineering Society USA

COMPUTER SKILLS
AutoCAD: drawing maps, detail design, 3D modeling, Sap2000: analysis of the structures,
Primavera: project planning and budgeting, Slope W: Slope stability analyzing,
Plaxis: Geotechnical Finite Element, Seep W: Analyzing of seepage.
LANGUAGES
Farsi (native speaker); English (fluent oral & written); Arabic (fluent); Turkish (fluent)

WORK EXPERIENCE
Jan 2009 - currently URS Australia
Senior Civil/Geotechnical Design Engineer/ Project Manager
* Designing Earth Dams for Santos mine projects (slope stability, seepage, construction materials, site investigation and split-way);
* Designing a reinforced soil retaining wall for Australian government (site investigation, internal stability and external stability);
* Managing Projects for Earth Dams;
* Running the tenders for the projects;
* Monitoring and training the junior Engineers in the office;
* Teaching Project Management course and Primavera software for junior Engineers in the office
June 2008- Jan 2009 Atkins London
Geotechnical Design Engineer
* Designing the retaining walls for LUL;
* Assessing the contaminated areas in the London Underground;
* Assessing the old retaining walls and structures in the London underground for BTR;
* Running the tenders and organizing the project management for the above projects
Sep 2007- June 2008 Highway Agency (InterRoute) England-Kent
Geotechnical Design Engineer
* Writing the desk study reports, Site investigation general reports, IRF210 (Design Geotechnical reports) for parts of A21 and M23;
* Designing several remediation for defects (landslide, crack on the carriageway) for the above roads using the best traffic management;
* Designing the pile foundations and assessing the foundation settlement under the bridges in the carriageway.
2004 – 2006 Maroon Consulting Company Iran
Site Manager: In the Project of the longest railway track from south of the Iran to the North.
Construction Manager: Construction of the Kerman-shah Petrochemical Factory.
I was a member of the Pile designing team in the offshore and inshore project for Asalouyeh port.
I was working as a member of Concrete structure Designing team – The job included the design of the foundation, pipe rack, and drainage system for Kerman-shah Petrochemical Project.
2001 – 2004 Payavar Engineering Company Iran and Syria
Site engineer inspector: Earthwork project of the new cement factory in Syria.
For the Site Investigation in the Crude Oil Store Concrete Tank Project
A member of team for designing the retaining structures of the Petrochemical Phase 4&5.
A member of team for designing & constructing the Dynamic Compaction in Olephin 10th Project.
A member of team for designing the roads in the Omidiyeh Way Project.
AWARDS
2003 The Iranian Concrete Institute: Prize-winner certificate for the best durable concrete design Teheran, Iran
SPORTS Black belt in karate (Three Dans)

REFEREES Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 4798)

Go to Search Parameters...

Brief Description

As a residential developer and general contractor I am committed to the principles of construction. I am prepared to advise and assist in making decisions with regards to land development, commercial & residential building and construction project management with cost effectiveness and proficiency

24 years experience in the Quality Control, inspection, supervision of pressure vessel, piping, pipeline and structural steel work. Certificated NDT level II in the UT/RT/MT/PT. Performed WPS/WQT and inclusive of Mechanical Testing witness. I have knowledge of ASME, ANSI, AWS and API code.

Construction Manager Construction Project Manager Project Manager Civil Engineer Construction Engineer Structural Engineer Estimator

With an impressive diversity of significant experiences, I have developed a familiarity with several field of work such as petrochemical refinement, water treatment, environmental protection and various power generation systems

Structural inspector, Diploma in civil engineer

Engineer having 10 years of experience in Foundation,Erection,Stringing from 110 kv to 400 kv lines and also having exp in OPGW overhead installation

Plant Maint Engg

I am presently working VOLTAGE ENGINEERS LTD AT DOHA QATAR) as plant engineers / Automobiles maintenance engineers .managing a of workshop Transports in charge ( Company- Oil , Gas / power, infrastructure/ Energy/ Constriction. automobiles )

Survey Party Chief / Technician with experience with all phases of boundary,constructionand topographic surveys

Electrical Engineering diploma holder with more than 14 years experience in electrical oil and gas onshore construction field.

Graduate having experience of more than 14 yrs. in Secretarial and Administration

Factory Manager, Technical Manager

-Has wide working knowledge and experience on automotive production line.

My education background was Architecture but I have experiences in various multi cultural work environment, specially in multi national Engineering Company. Project execution on fabrication and construction for Civil and Mechanical according applicable international code/ standard.

Looking to join a progressive construction organization that needs an expert in planning & Cost control follow up engineer for senior position. my experience incorporates all types of construction projects - high-rise multi-dicipline buildings, touristic villages, etc.

Over 9 years UAE experience as CADD Operator in Khatib & Alami (CEC). Responsible in preparation of Design drawings and final drafting stages of Mechanical drawings.

Expereince in Total Station surveying

learner, can work under pressure, Good in oral and written communication, perceptive details, Friendly and approachable but firm when needed, Patient and dedicated to work.

A seasoned, highly organized construction professional with over 38 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in the Pulp & Paper, Petro-Chemical, Government, Hydro Electric, Institutional, Mining, Nuclear and Wind Power

As a person who has worked as a factory trained technician on erecting and lifting equipment and is a certified crane inspector I am currently seeking employment that will further advance my knowledge in this rapidly changing industry. I am looking forward to discussing any potential opportunities.

I am presently a Commissioning Turnover/Interface Lead at an oil sand plant constructing Hydrogen/hydrotreaters. Looking for ne international projesct with 28/28 rotation.

see below for cover letter breifling describing my 20 years in the civil construction industry

Welding Certificates

Materials and Warehouse Manager with over fifteen years experience in materials handling, logistics, warehouse, recycling and transportation industries. Proven success in improving productivity and service, while reducing costs through total quality management, goal setting and a participatory man

Heavy equipment operator

Uncommon ability to manage multiple tasks, meets deadline, and work overtime

Diploma in instrumentation eng ,15 years experiance in oil & gas field

More than 16 years in the field of Secretarial job, 4 years in the field of Accounting and Credit & Collection & 2 years in Office Clerical jobs. Expert in computer program applications like MS Word, Excel, Access, Outlook, PowerPoint, Mind Manager, CRM. Also, PC assembly and trouble shooting.

Mining 20 years South Florida dig wet or dry prossess every type of material. Experence with Hoe,Loaders,Buldozers,Pumps, Screeners,Stackers, Crushers, Machanic, People, Customers, Bidding, Truck Broker 20 years to move material, IMSHA,Permits, South Florida Water Management .

Constructions, Erections, Installation, Maintenance, Inspection of Static& Rotating Equipment Piping Acessories and Structural steel and Computerized Maintenance Planning’s System ,Familirize with API , ASME and ASTM standard . Understand to read P&ID, Hyd/Pneum Circuit, Isometric Drawings.

Senior Geotechnical / Civil Engoneer

Heavy equipment - mining

■ Quality-driven professional with over 25 years of experience■ Verifiable track record for successful completion of projects in EUROPA ,SOUTH- AFRICA.RUSSIA and QATAR. ■ Business oriented; able to understand and execute broad corporate policy. ■ Implementatio

Good interpersonal and communication skills. Able to work in a team as an individual. Various working experiences and willing to learn for a new things. Interested with a new experience and computer software. Discipline and be able to lead a group. Appreciation of outdoors and the e

Design Coordination, CAD Drafting , Site Supervision

Quality Assurance/Control * Inspection & Project Engineering * Welding * NDT * Coating * Fabrication * Construction * Offshore and Onshore Gas / Oil / Gas Plants*Jackets / Topsides / Well sites / Pipelines / Piping / Structural / Pressure Vessels / Tanks /

Efficient planning for execution of project

Ph.D. materials engineer with 23 years of R&D experience in: a) Program management; b) Measurement of material properties Test method development and fixture design; c) Polymers, composites and their processing; d) Laboratory supervision and management of technical personnel.

13+ Years of Experience in Overhead Power Transmission Line Projects/Construction

Senior Geotechnical engineer with 7 Years of experience and having Masters Degree in Geotechnical engineering

Thirteen (13) years Experienced as Procurement Administrator with a Swedish Company in Riyadh Saudi Arabia

computer skilled--ms word/excel/autocad, hardworking and honest

Document Controller - A professional who values integrity, quality and accomplishment. Proven ability to adjust well in a challenging environment. Demonstrates strong organizational skills. Quick to adapt to new situations and processes

Geotechnical Engineer

Over 20 years operating track hoes, dozers, loaders, rock trucks, etc., in construction of water treatment, sewer plants, and road construction.

27 Years of Indian and abroad experience as a worker, Foreman and as a Supervisor in Aluminium fabrication, Aluminium Cutting, Site fitting, Glazing, Glass, Silicon works and Site maintenance

Civil and Structure AutoCAD Draughtman with 17 years experiance

OBJECTIVE: To be a Resident Engineer or a Project Manager.

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out