Resume - Project Engineer/ Program Manager/ Controls Engineer

Misco Jobs

Resume #82242

CONTACT INFORMATION:
View contact information...

Summary of Qualifications
Senior controls professional with over 12 years in automotive and general industries, proficient in engineering projects with leadership in implementation with attention to detail of plant floor to system server level. I have coached interns and project engineers. I have also developed a reputation of consistently exceeding internal and external customer requirements.

Capabilities
* Controls Specifications
* Scope of work
* Budgets & Schedules
* Error proofing
* Power Circuits
* Machine Build
* Supplier Evaluations
* Machining Equipment
* Assembly Equipment
* FIS/QIS/SCADA
* Latin American Projects/Spanish Language knowledge
* Experience with DeviceNet, ControlNet, EtherNet IP

EXPERIENCE
Electronic Data Systems
Troy, MI
Project Engineer/ Program Manager/ Sr.Controls Engineer, December 1997 – Present
American Axle Manufacturing
* Lead IT/Controls Engineering for Driveshaft Manufacturing corporate wide in US & Mexico.
* Managed Project teams in implementation & Error Proofing Systems on Drive shaft machining and assembly Lines at Mexico & US plants resulting in cost savings of Millions.
* Review Control Drawings Power Circuit to ensure company standards, codes and safety.
* Supported machine build, testing and installation activities including systems run-off & Validation.
* Developed machine and system scope of work and specifications; enhancing controls capabilities resulting in reduced machine down time.
* Corporate lead engineer for capital equipment transfer and controls reconfiguration resulting in reduced cycle time and energy savings.
* Reviewed quotations, supplier solutions and provided technical evaluations to the team and provided capital equipment cost savings on NVH Testers and Systems Balancers.
* Managed suppliers development activities; and established corporate standards for controls.
* Full responsibility of budgets and schedules; provided senior management with project updates.
* Traveled internationally for machine design, run-off/validation and implementation.
* Supported lean manufacturing group.
* Experience with numerous Allen Bradley platforms and Siemens Step 7.
* Integrated a Parts Marking System on two assembly lines.
* Modified the sequence of operations for the affected assembly stations resulting in 5% to 15% in down time reduction; this was subsequently implemented in plants in Michigan, New York, Ohio and Mexico.

General Motors North American Produce Product
* Lead controls development activities for the GM Common Systems of Option Data
Delivery (ODD) and Quality Andon System (QAS) on the ControlLogix
* Took lead in the development activities of FIS (Factory Information System).
* Project engineer for design and documentation efforts for other GM Common Systems.
* Setup lab environment and conducted testing of the GM Common System templates resulting in cost saving and reduced problems during implementations.
General Motors Metal Fabricating Division
* Installed C-MORE (Throughput Analysis) on the Aluminum Cradle line at the Flint Metal Center.
* Project Planner for the MFDY2K group. Facilitated the Y2K assessment, remediation, and testing of Systems across several plants in US.
General Motors Orion Assembly
* Lead engineer for SFE/FLEX system interface with the plant floor equipment, by creating a PLC database for vehicle build information.
Dow Chemicals (DowNET Project)
* Worked as a Network and System Administrator.
* Installed routers, switches and servers for supporting the IP Phones infrastructure in numerous plants across Canada and Houston, TX areas.

Ford Motor Company
Rawsonville, MI
Controls Engineer, May 1997 - November 1997
* Supported Manufacturing Engineers to improve the cycle time of assembly operations.
* Cross functional team member for Quality and Lean Manufacturing Processes in assembly and machining operations.
* Trouble shoot machinery during downtime.
* Conducted preventive maintenance.

The Aarell Company
Troy, MI
Controls Engineer, August 1996 - May 1997
* Developed windows-based Panelview software for process control.
* Developed and conducted start-up of Building Facility Controls. Air Handling Houses for general temperature control in plant, Supply & Exhaust fans for circulation and building pressurization and Hot & Chilled Water loops for Paint Shop.
* Facilitated training for maintenance and operation of Air Supply Houses.
* Revised electrical prints and ordered equipment that met customer's specifications.
* Worked on and installed Smart Motor Controls and Variable Frequency Drives.
* Developed controls systems on various Allen Bradley PLC platforms.

EDUCATION
University of Michigan
Dearborn, MI
* B.S.E.E., August 1996

ADDITIONAL INFORMATION
Fluent in Arabic and advanced comprehension in Spanish.

Firas Shamoun
39850 Coalport
Clinton Township, MI 48038
PH: (586) 260-0022 E-mail: firas586@yahoo.com

Career Summary
Project Engineering Support
* Designed Error Proofing System for Driveshaft Assembly. This reduced miss builds cut down on miss builds
* Working with Manufacturing and Quality Engineers for Project Scope definition and requirements.
* Working with Industrial Engineers for Process Flow and equipment layouts as well as machine level device mountings.
* Review Machine Controls Drawings for mark-up and approvals. Ensuring they meet the company approved components list.
* Reviewed Machine Controls Drawings to ensure they meet industry and company power and safety standards.
* Review and evaluate Supplier Quotations.
* Supporting machine run-offs and installations from the IT and Controls perspective.
* Traveled Internationally to Mexico, England and Germany.
* Developed supporting documentation and training manuals.

Project Management Support
* Leading all IT and Controls activities from cradle to grave for Driveshaft Manufacturing.
* Have sourced and managed suppliers for development and installation activities.
* Have networked with local distributors and worked with Plant and Corporate personnel for business evaluations.
* Working with Buyers in Quoting, Requisition entry and Purchase Orders for obtaining hardware and software items.
* Assist in writing the Request For Quote documents for Machine and System Level.
* Tracking machine build and implementation status and reporting to management.
* Attended numerous Workshops for Manufacturing Planning with Plants.
* Attend weekly status meetings with program launch teams.
* Worked with Logistics personnel with shipping requirements for machinery and other hardware.

Development
Developed the following Controls Systems:
* Developed Error Proofing Systems.
* Developed Manufacturing Supervisory Systems.
* Developed Manufacturing Build Systems.
* Experience with numerous Allen Bradley platforms for 12 years.
* Development and troubleshooting experience with Siemens Step 7 (6 months).

Leadership
* Lead and design innovative and complex projects.
* Effectively train associates.
* Direct plant teams to implement action items.
* Provide guidance for less experienced peers.
* Drive project design that benefit customers and increase profits.
* Roll model, a strong work ethic and customer driven focus.

Accomplishments
* Lead numerous successful installations.
* All performance review feedback from peers and customers are above average.
* Always utilized for project work (no bench time).
* Promoted based on job performance and leadership qualities.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3401 to 3450 of 4806)

Go to Search Parameters...

Brief Description

Specialized in electrical commissioning engineering substation and protection, protective relay co-ordination power system study, Electrical engineering Diploma

Marine + International Projects Oil & Gas

High Skills in Plant Management, Maintenance, Engineering, Training &Technical Support.

I am a qualifies Inter provincial (red Seal) Industrial Mechanic (millwright), as well as a Interprovincial (red seal) welder certificate, with a all psition SMAW CWB and a 2 position GMAW CWB ticket.

Technical Project Manager

Project Engineer/ Program Manager/ Controls Engineer

Graduate Mining Engineer, Colorado School of Mines (First in Class 1998), 4 years military experience, US Army Corps of Engineers Alaska District. Looking for a developmental position within a growing mining company. Will relocate anywhere.

To obtain a career in the construction/mining related fields

PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Project Management, Oil & Gas Industry, Civil Costing, Planing and Estimation

Piping/Mechanical Draughtsman (sewerage plant/Oil & gas)

Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party

Thorough knowledge in Primavera, MS Project and MS Office

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Surgical Emergencies :- Road Traffic accident, crush injuries, blunt trauma abdomen,Head injury, liver tear, gunshot, spleen rupture, face injuries, stab injuries, spinal cord compression, assult injuries, burn injuries etc.n Medical Emergencies :Myocardial Infraction, COPD, sun stroke, snake etc.

Corporate Executive in Information Technology with extensive international experience in Systems/Product Architecture (Analysis & Design), Program/Project Management, Business Continuity Disaster/Recovery Planning, Technical Service Delivery & Support, Technical/Operations Management

Contract data analyst specializing in data extraction, conversion and reporting for over seven years.

As you will see from the enclosed details I am a qualified and highly experienced hands-on Corrosion, Coating and Insulation Professional with + 20 years extensive onshore and offshore experience within the construction, oil & gas and petrochemical industries in both the Netherlands and abroad.

I want a job in Madagascar or Mayetta or Mascareignes Islands.

Designer or draftman

Engineer & Lawyer – Significant industrial commercial experience with an international dimension including Contracts, Claims, Bids, Fluent in English, good command of Greek and French.

my jobs

Mechanical Technician for oil and gas rotating equipment Electro Mechanic Technician for Domestic and Industrial HVAC Equipment.,NDT UTI and MTI LEVEL – II (Welding non destructive testing),

Apprenticed rigger with vast skills gained over 28 years,qualifications = resin socketing,crane/winch operator deck foreman,lifting gear coding,inspection ,certification.rig mechanic,rigging instructor

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

Post Graduate Diploma in Indstrial Engineering, INDIA with past 4+ years exp. in Oil & Gas Industry

Geologist mining, environmental company

Powerbuilder, Sybase, Oracle, Informatica, UNIX Shell Script & Perl technical skills as Analyst Programmer.

Civil Engineer with wide and solid experience in planning and execution of remodeling projects and construction of gas station in multinational company dedicated to the commercialization of fuel and lubricant. Skilled making decisions lowers pressure. With easiness to manage teams of high acting and

To apply a position as an Electrical Engineer

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Authomotive technology major in hydraulic machineries and heavy equiptment

Power Plants Commissioning , Operation, HRSG Commissioning

over 11 years of heavy equipment operation experience in multiple industries.

I am a Diploma in Electrical and Eletronics Engineer with 3years experience in the field of Electrical Cad Designing and Electrical Control Panel Wiring, i do have knowledge in system administration and Primavera Project Planner.

Have a working knowlege of setting up total stations, performing traverses, level loops, topos, and drafting with Land Development Desktop

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Miner

National coordinator of Biokinetics at ESKOM (Electricity Supply Commision of South Africa). I hold a DPhil degree in Biokinetics, specializing in Work Simulation assessment and taks-specific job accommodation. I`ve been national coordinator for 4 years and I coordinate several other health projects

Cost Estimating, Project and Contract Management, Planning/Scheduling, Project Controls and Finance

Surveyor with diploma and 3 years of wide range of professional experience

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

Workshop / Fleet manager over 20 years experience

Technical Summary: More than twelve years of High-Tech manufacturing procurement under Department of Defense Contracts in compliance with C.C.A.S., FAR / DFAR Regulations and I.T.A.R.

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 [ 69 ] 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out