Resume - Level II certificate in PT,RT,MT and UT..Confident to take up any job in oil fie...

Misco Jobs

Resume #82336

CONTACT INFORMATION:
View contact information...

Objectives:

A carrier in a reputed organization with challenging opportunities for growth and shouldering responsibilities in any suitable position where I can use my technical and leadership skill to grow up in the organization with intent to serve the company in an upgrading manner.

Educational Qualification:

* Graduation
B Tech (Mechanical Engineering) from LBS College of Engineering (University of Kannur)
Aggregate Percentage: 61%

* ASNT Level II Certificate in
RT(Radiographic Test)
UT(Ultrasonic Test)
MT(Magnetic Particle Test)
PT(Penetrant Test)

* Plus Two
Institution: Rehmania HSS,Calicut, Kerala
Marks Obtained: 78.16%

* SSLC
Institution: Silver Hills High School, Calicut, Kerala
Marks Obtained: 78.5%

Specialization:

Certificate in Post Diploma Specialization Course of Oil Field Engineering & Quality Control from Induscan Petroleum Institute, Nilambur, Kerala with the following subjects.

Construction Drawing Such as P & ID, Piping Isometrics, Equipment, Structural, GAD.

Familiar with Material Inspection, dimensional check and documentation as per Construction Material Standards such as ASTM/ASME SA 106,SA515,SA516,SA105,SA312,SA240,SA234etc and with ANSI standards of B36.10,B16.5,B16.9etc.

Thorough knowledge in Welding Standard of ASME Section IX and API 1104.Familiar with Welding Procedure Qualification, Welder Qualification, P numbers, selection of Electrodes, Weld Visual Inspection etc.

Good knowledge in Radiographic Interpretation of weld joints, Ultrasonic Inspection, Magnetic Particle Inspection and Penetrant Test, Reporting and Documentation.

Fabrication of Piping, Structure, pressure vessels and other Equipments, documentation of History Sheet, Test Pack Clearing etc.

Confident to handle the construction and quality control activities as specified in the Drawings and applicable standards and specifications.

Technical Skills:

* Programming Language: C, C++
* Operating System: Windows 98,2000,XP,Vista

Academic projects:

B Tech Main project
" Improvisation Of Dry Dock Frontage Dredging System"
We did our project at the harbour work shop of COCHIN PORT TRUST, Eranakulam,Kerala along with the Department of Mechanical enggineering of that firm. The objective of our project is to provide an improvised design for the dock frontage dredging system that can be used to remove the mud that gets deposited in the front portion of the dock.
B Tech mini project
"Implementation Of Hybrid Technology In Two Stroke Scooters For Improving Efficiency "
The mini project on the above topic intends to design a hybrid scooter and bring to notice the concepts associated with the hybrid technology through the following topics – components and constituents, need, efficiency, performance etc...

Electives taken and Seminar conducted:

Elective:
* Numerical Analysis
* Optimization Technique
* Entrepreneurship
* Tool Engineering & Design
Seminar
* Composite Noise Barriers
Strengths:

* Technically sound in fundamentals of Mechanical Engineering and proficiency in thorough understanding of Engineering Concepts and providing Effective Solutions.
* Possess Efficiency in Learning New Skills, acquiring knowledge quickly in other words short learning Curve.
* Goal oriented, Creative and resourceful.
* Able to deal with people diplomatically.
* Comprehensive problem solving ability.
* Determined & focused on end results

Personal Details:

Date of birth: 22-10-1985
Age: 24
Sex: Male
Nationality: Indian
Marital Status: Single
Hobbies: Reading books, Listening to music.
Languages Known: English,Hindi,Tamil and Malayalam

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 4805)

Go to Search Parameters...

Brief Description

Nuclear Operations Supervisor. Supervised operations ensuring safety of personnel and equipment. Supervised maintenance operations on I&C equipment.

Experience includes Cost Engineering, Electrical/Instrumentation Estimating, Construction Electrical Engineering and proprietary software support. Duties include reporting of various kinds, forecasting, change management, staffing plans, cash flows and more.

Project Management/Engineering/Construction, with over 25 years of professional experience in EPC projects, in Management, Engineering and Construction in oil and gas field, infrastructures, site development, roads, airstrips and buildings, Proven Project Management skills with post responsibility

qa/qc engineer (E&I),6years experienced

Please consider this letter as an application for employment within your company. I wish to apply for the position as HVAC ENGINEER /Design Drafter/Quantity surveyor that will give me an opportunity for growth and career challenges particularly in the areas of design engineering and technical drafti

Land Surveying, Setting Out, GIS, Cadastral, Photogrammetry, Remote Sensing, CAD

I'm 36 years old Mongolian man. looking for mining operations job. Such as mine foreman, mine planner, translator

Proficient use of Microsoft Office Applications, Operating Systems, SAP R3/R4, Graphical Applications, IE Browser, E-mails, EDMS System such as Livelink, E-Cabinet and MS Access, Equipment Communications, Programming Languages, and Computer Troubleshooting ,Typing speed of 50 W.P.M.

Estimation, Quantity survey, planning, design

Level II certificate in PT,RT,MT and UT..Confident to take up any job in oil field industry.Good knowledge in drawings,construction materials,welding standard,piping,test pack completion etc..

AT 44, I AM CERTAINLY NOT A NEWCOMER TO THE FIELD OF CONSTRUCTION, HAVING OWNED MY OWN FIRMS FOR OVER 15 YEARS.

Ability to learn new Languages, Technologies quickly Strong Knowledge in Civil Engineering Subjects Proficiency in Software Packages like Auto Cad, Auto Lisp, Staad-III Good Practical Knowledge in Civil Constructions „h Ability to learn new Languages, Technologies quickly

I am interested in a position within your company’s electrical installation or electrical service Departments.

7 years of experience in the field of design, development, analysis. Design and modeling of Special Purpose Machine, Machine tools & accessories, Dies, Cams, jigs and fixtures etc.

Safety and Health Manager with international experience seeks a challenging and fulfilling position with a company that encourages and rewards ideas, initiative, perseverance, and accomplishment.

I am looking for a position of Field Engineer, Office Engineer or Quantity Surveyor. I worked with the JBC for a little over a year. I am a very hard worker. I am very proficient at reading spec books and engineering drawings.

Civil Construction Engineer, Construction Superintendent Lead Civil Engineer

proficient in using MS-Office ,Word Excel & Expedition,and i did my B.tech in Computres science and engg

I am Civil Engineer having 9 years experiance in marine works. construction of breakwater, Quawalls installation, boat ramps, shore protection, reclamation and dredging with multinational construction company and consultants. presently working with reputed consutlant in maritime field.

Over 20 years of Electronic, Electrical and Mechanical experience. 10 years of Field Service in both domestic and international travel.

I am lead piping engineer ,supervised 6 engineer ,6 autocad drafter and 7 PDMS staff.I am familiar with all international stds related to oil&gas ,petroleum and power plant.

17 years of legal work experience as DA, Chief Judge, Legal Advisor and part time professor

HSE Manager in major energy, power generation, oil and gas sectors covering technical and commercial requirements. With professional experience in directing and mananing health, safety and the environment protection & sustainability development aspects as per OSHA framwork and guidelines. Strong abi

NCCO/NAHETS Certified operator. Northern California College of Construction Grad

Document Controllre with 3 years work experience in Qatar

18 Years including 10 years in oil & Gas - Construction experienced Safety Specialist , having Mechanical engineering Degree from Bangalore University and Diploma in Industrial Safety From RLI Chennai, India & OSHA 30 Hours Trained - Key skills : Construction Safety Mangement, Auditing, Trainer

Educational Qualifications: Master of Engineering in Mechanical Engineering specializing in Welding Engineering from Indian Institute of Technology, Roorkee, Uttar Pradesh, India in April 1996 with 74.40%, American Welding Society (AWS) Certified Welding Inspector (CWI) -AWS-CWI Certificate

3 yrs diploma in mechanical engineering with 1st class from bset, bhubaneswer (india) in April-2002 professional qualification: -• cswip 3.1 (twi) certification for welding inspector, cert. no- 36291 •surface preparations & paint application techniques (certification from jotun paint school)

Senior Primavera 6.2 Planner / Scheduler or Management Skills

Experience as Piping Designer, in performing Pipe Modeling, Piping Arrangement Drawings, Checking & Extraction of Isometrics from 3D Model. ƒá Hands on Experience in Piping Software¡¦s ¡V Bentley¡¦s PlantSpace Design series, Microstation, PDMS & TRIBON M3. Knowledge of Piping Stress Analysis.

I have done degree in mechanical engineering. I am having AWS-CWI certification. And I am also having approval of Saudi Aramco as a Welding Inspector. I have also done ASNT level-II in UT, MT, RT, and PT. I am having more than 5 years and 8 months experience in oil and gas field.

Materials Coordinator on oil/gas, and construction industry. 12yrs experience onshore and offshore.

Highly skilled graduate Project Manager/Civil Engineer and Project Controls Lead with more than 25 years related domestic and international experience in project and construction management.

Result oriented Geotechnical/ Engineering Geologist with 2-3 years onshore experience in ground engineering with keen interest to develope further expertise in the field. Strong analytical and personal ability to problem solving solutions with Civil Engineering Geology knowledge of Construction

I have 15 years experience in the electrical field, with journeyman and interprovincial qualifications, also a Class A ticket. I have training in iIndustrial, commercial and residential electrical installations, also, telephone and data networks, with Nordex certification.

With twelve years of varied experience and proven competence in the electrical field and two years experience as a Process operator, I'm looking for an employment setting offering challenging employment with a supportive team environment.

Experience in control Automation system ,contruction and oil and gas

PLANNING/SCHEDULING ENGINEER & BACHELOR OF ENGINEERING (CIVIL)

I have 30+years in the heavy equipment field service. I work on all parts of any machine diesel or gas that is construction or mining related. Don't let the years fool you. I can work circles around the younger guys and teach them more than they have ever learned.

Qualified diesel mechanic with 12 years experience in a commercial and mining environment and 3 years Maintenance supervisor experience.

Autocad & Inventor Draftsman

Survey Technician/Instrument Man

I have 12 years work experience in Civil Engineering Constructions and 4 years experience in Environmental Remediation project for Brunei Shell Petroleum. My Supervisor experience includes execution of structures as per drawings and specifications with skilled group of trade persons and subcontracto

A multi-skilled mechanical/piping, Construction Superintendent/manager, QA/QC Engineer, with over 20 years international experience in the oil, gas, petro-chemical and power generation industries

It is with great interest that I am forwarding my resume for your consideration. My record of academic achievements and professional career history, demonstrates attributes that make me a valuable employee.

Industrial Electrical, Instrumentation, Power Generation Systems, PLC and Scada design and programming, Construction and Maint.

•Over 9 years experience preparing detailed estimates for Capital Projects involving all engineering disciplines including process design, civil, structural, mechanical, piping, electrical, instrumentation, and process control for Mining and Heavy industrial Projects.

Sr. Piping Design, Lead Des, ACAD 3D, Microstation 3D

Estimating

Qualified and well experienced Piping Engineer; availing in excess of 25 years of experience in the full spectrum of engineering, design, detailing, fabrication, erection, retrofitting, testing, QC, commissioning, maintenance and demolition of Process/Power Plant and Piping.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out