Resume - Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Su...

Misco Jobs

Resume #82463

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION:
Date of Birth: February 19, 1955
Place of Birth: Benton Harbor Michigan
Citizenship: USA
Passport: Yes
Visa Status: None
Gender: Male
Marital Status: Married

EXPERIENCE SUMMARY:
Over thirty three years of diversified experience as Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector. Maintenance Planning Software includes PIMS, Ventyx/INDUS (Passport Portal G and J), Primavera P3, Word, and MS Project.

ACCOMPLISHMENTS:
Senior Planner:
- Member of organization (Work Control) that led DC Cook Nuclear Plant in obtaining an INPO 1 rating in one fuel cycle (from an INPO 3 rating - an industry first)

Environmental & Safety Manager:
- Inherited Clean Air Act compliance issues resolved without litigation or fines
- Developed an environmental program that was recognized as a leader in Pollution Prevention efforts by the Michigan Environmental Council, Michigan Department of Environmental Quality, and the Print Industries of Michigan
- Registered (and sold) VOC Emission Reductions Credits in the Michigan Open Market Trading Program
- Charter member of the Michigan Great Printer's Project
- Developed many close working partnerships with State of Michigan MIOSHA and DEQ representatives
- Initiated and led strategies that resulted in reductions of direct medical costs by 50%, Medical
(OSHA Recordable) rates by 30% and Lost Time rates by 41%
- Developed Environmental and safety program of company with 1100 employees from non-existent to one that was recognized for its accomplishments by the State regulators and National Environmental Groups
- Developed and led Pollution Prevention initiatives that reduced VOC emissions by 60 tons annually

Procedure Writer
- Developed all initial installation and modification procedures (where none existed) for all new construction and modification activities at the DC Cook Nuclear plant for the civil, electrical, mechanical/piping, welding from "tribal knowledge", codes, site specifications etc.

LANGUAGES
English (US) – Fluent
Italian - Beginner

EMPLOYMENT HISTORY:

March 2005 to Present: SUN Technical Services, Inc.
Lead Electrical Outage/Project Planner * DC Cook Nuclear Plant
Using INDUS (Passport J), VENTYX and MS Word planned electrical, I&C and HVAC preventative maintenance, corrective maintenance and design changes. Performed field walk downs to identify and resolve job hazards, installation problems and to identify support work such as temporary power, scaffolding, etc. Interfaced with design engineering, procurement engineering and system engineers to resolve installation issues. Researched drawings, specifications, vendor manuals, maintenance history and change documents to ensure work was planned and performed per codes and plant requirements. Ordered equipment, materials and parts as needed and initiated required BOM requests, Engineering Evaluations and work permits. Wrote detailed job sequences identifying critical parameters to ensure the successful execution of the task or project. As a Lead and Senior Planner other Planner's work was reviewed for completeness, accuracy and that the task could be successfully performed as planned. Trained planners on INDUS and the DC Cook work control process.

February 2005: Babcock & Wilcox
Modification Project Electrical Planner * Quad Cities Station
Using Passport J, planned outage corrective maintenance and design change electrical work activities through field walk downs, researching one-line, elementary drawings and wiring diagrams, ordering materials and interfacing with the design group and engineering organizations as needed. Using Word wrote detailed job sequences identifying critical parameters that ensured successful execution of the task or project.

July 2004 to December 2004: SUN Technical Services, Inc.
Senior Electrical Planner * DC Cook Nuclear Plant
Using PIMS (NPM) and Word, planned electrical and HVAC preventative maintenance, corrective maintenance and design changes. Performed field walk downs to identify and resolve job hazards, installation problems and to identify needs such as temporary power, scaffolding, permits, etc. Interfaced with design engineering, procurement engineering and system engineers to resolve installation issues. Researched drawings, specifications, vendor manuals, maintenance history and change documents to ensure work was planned and performed per codes and plant requirements. Ordered equipment, materials and parts as needed. Wrote detailed job sequences identifying critical parameters to ensure the successful execution of the task or project.

May 2004 to July 2004: NESTLE USA
Safety & Environmental Head (Manager)
Managed the safety, emergency plan, training and environmental programs of a half-million square foot facility with over 450 union associates with oversight over process safety management, ergonomics, Job Safety Analysis, control of hazardous energy, confined space, storm water, air emissions, hazardous waste, contractor safety, material handling, etc.

April 10-17 2004: NIC
Electrical Quality Inspector (ANSI N45.2.6 Level II) * Browns Ferry
QC Training

March 2004: Atlantic Group
Electrical / I&C Quality Assurance Inspector (ANSI N45.2.6 Level II) * St. Lucie Unit 1
QA Surveillance and oversight on modifications and updates to instrumentation systems in the control room (fiber optic Foxboro power supplies and input/output and communication modules).

October 2003 to December 2003: * SUN Technical Services, Inc.
Safety Root Cause Analyst * DC Cook Nuclear Plant
Safety expert on a team performing a PII root cause analysis of a commercial diving accident at the Donald C. Cook Nuclear Plant in Michigan. Responsible for assessing the client's safety program, culture and risk assessment process and providing recommendations for effective corrective actions.

December 1995 to July 2003: IPC Communication Services
Safety & Environmental Manager
Responsible for the safety, environmental and security programs of six facilities in four states (Michigan, California, Tennessee, and Texas). Developed company policies and written procedures to comply with government safety and environmental regulations (MI-OSHA/OSHA, NESHAP, AHERA, DOT, CWA, CAA, CERCLA, RCRA and EPA/Michigan DEQ). Monitored employee work practices and coached employees to recognize unsafe behaviors. Developed company-wide Business Continuity and Emergency Plans and managed the company's high tech OEM customer security programs for software products.
- Authorized OSHA Certified Instructor (General Industry Safety Standards - 29CFR1910)
- Authorized OSHA Certified Instructor (Construction Safety Standards - 29CFR1926).
- Performed Job Hazard Analyses of work sites and of monitored employee safe work practices.
- Maintained MSDS program.
- Negotiated service contracts (security, hearing exams, regulated hazardous waste, used oils, etc.)
- Performed "New Source Reviews". Prepared and submitted 'Air Permits to Install' for new equipment.
- Prepared and submitted EPCRA/SARA Toxic Chemical Release Reports and Tier II Reports
- Emergency Coordinator for Business Continuity Plan, Emergency Plan, and Fire Emergency Plan

February 1995 to June 1995: NISCO/AQA, Inc.
Mechanical Supervisor * DC Cook Nuclear Plant
Supervised union sheet metal workers, ironworkers, carpenters and laborers during refueling outage. Monitored activities in the field to keep projects on track. All work was finished ahead of or on schedule and per outage milestones. Ensured work was in accordance with applicable codes, customer procedures and specifications, per approved design documents and in the safest, most cost-effective manner. Completed work walked down for completeness and as-built documentation prior to obtaining quality inspections and acceptance.

December 92 to June 1995: NISCO/AQA, Inc.
QA & Safety Supervisor * DC Cook Nuclear Plant
Audited and performed surveillance of welder qualification and weld procedure qualification tests for compliance to AWS D1.1 and ASME Boiler & Pressure Vessel codes and reviewed welder qualifications and weld procedures qualifications for acceptance per AWS D1.1 and ASME B& PV codes. Managed OSHA Safety program, establishing policies and procedures along with conducting training as needed to ensure compliance with all OSHA and MIOSHA, NESHAP, AHERA, and EPA regulations.

January 1991 to October 1992: Raytheon/UE&C-Catalytic
Procedure Writer * DC Cook Nuclear Plant
Developed and maintained the AEP Construction Department's electrical, mechanical, ISI. ASME Section XI and civil/structural procedures. Performed 10CFR50.59.e reviews and co-chaired the Design Change Compliance and Design Change Close-Out task teams.

June 1987 to January 1991: Raytheon/UE&C-Catalytic
QC Inspector: Level III Electrical, Level II: I&C, Structural, Visual Weld * DC Cook Units 1 &2
Trained, tested and certified Level I/II electrical inspectors, inspected all phases of electrical work from embedded installations to equipment pre-operational testing. Reviewed completed Job Orders for final acceptance.

April 1987 to June 1987: Basin Engineering
QC Inspector: Level II Electrical/I&C * Trojan Nuclear Plant
Performed EQ inspections on MOVs. Inspected Raychem splices, cable pulls, control room panel and MOV wiring modifications. Witnessed MOVATS testing of MOVs.

October 1986 to March 1987: Nuclear Energy Services, Inc.
QC Inspector: Level II Electrical, I&C, Mechanical/Piping, Visual Weld * Three Mile Island Unit 1
QA oversight of motor operated damper functional testing and Start Up/Pre-Op tests of the ESF ventilation system. Performed inspections on Technical Specification Surveillance Tests and I&C calibrations (bench/loop) of Foxboro multiplier, summers & signal characterizer modules, effluent radiation monitors, transmitters, transmations, level and pressure indicators, flow meters, chlorine detectors, etc. Also inspected Appendix R work & TSI thermolag installations, flamastic coatings, etc..

July 1986 to August 1986: R. A. Weirich & Associates
QC Inspector: Level II Electrical * LaSalle County Station
Performed inspections on Raychem splices and Okonite taping on MOVS, solenoids and Conax ESCAs.

December 1984 to April 86: Butler Service Group, Inc.
QC Inspector: Level II Electrical, instrumentation &Control * Clinton Power Station
Performed surveillances and inspections on the calibration (bench/loop) and maintenance of transmitters, transmations, pressure and level indicators, optical isolator cards, PCBs, flow meters, radiation monitors and associated instrument lines (impulse, pneumatic, signal and ample). Performed inspections and surveillances on the maintenance and rework of Limitorque valve operators, Hydramotors, solenoid valves, switchgear/MCCs, diesel generators, electrical penetrations and various electrical components.

November 1982 to November 1984: Butler Service Group, Inc.
QC Inspector: Level II Electrical, Instrumentation & Control * Enrico Fermi Unit 2
Inspected Hangers, conduit, tray, cable installations and terminations. Inspected control rod drives and control rod position indicating probe work. Performed Quality Engineering reviews on electrical and I&C work packages prior to issuing for work to assign witness and hold points and to identify necessary inspection procedures and checklists to verify work. Reviewed 10% of all test packages assigning witness and hold points, reviewing the remaining 90% of test packages after testing for acceptance of test results.

April 1982 to November 1982: Henry J. Kaiser Co.
Lead Electrical Inspector: Level II Electrical, Visual Weld * Zimmer Nuclear Power Plant
Working Assistant Lead Electrical Inspector performing inspections on electrical installations; anchors, hangers and raceway. Welds inspected per ASME B&PV code, ANSI B31.1, AWS D1.1 and AISC. Provided direction to three electrical inspectors in the drywell/wetwell areas of the plant.

October 1981 to March 1982: Ebasco Services, Inc.
QC Inspector: Level II Electrical, Instrument & Control * WPS 3
Performed surveillance on several subcontractor electrical installation and inspection activities, assuring compliance to their procedures, specifications, codes and standards and acceptance reviews of installation, welding and inspections procedures to AWS D1.1, ANSI and IEEE. Reviewed completed inspection records and work packages for acceptance and close out.

September 1980 to September 1981: Lord Electric Co.
Lead Electrical Inspector: Level II Electrical * WPS 3 & 5
Supervised the inspection activities of five electrical inspectors, assuring in-process installations were inspected and documented in a timely manner. Assisted the QC Manager in initiating and revising installation and inspection procedures. Also, performed indoctrination and training of inspectors.

May 1978 to July 1980: Fischbach/Lord Electric Co.
QC Field Supervisor: Level II Electrical, Visual Weld * WPS 2
Supervised twenty five electrical and weld inspectors. Coordinated with Construction Management to provide QC coverage as required to support their activities and schedules. Interfaced with the Client and Construction Management to resolve any perceived quality program deficiencies and quality concerns.

February 1978 to May 1978: Bechtel Power Corporation
QC Inspector: Level II Electrical * Palo Verde Nuclear Generating Station
Performed inspection on embedded electrical installations.

January 1976 to February 1978: L. K. Comstock & Company, Inc.
QC Inspector: Level II Electrical, Visual Weld * Fermi Unit 2 & DC Cook Nuclear Plant
Performed inspections of welds per AWS D1.1 and on conduit and tray installations. Witnessed cable pulls and inspected cable terminations and splices. Worked with the Westinghouse representative verifying the installation of the full and part length coilstacks into the reactor head (DC Cook Unit 2).

EDUCATION:
1973 Graduate St. Joseph High School, St. Joseph, Michigan 49805
1981 Transformers and AC circuits – Ebasco Services, Inc.
1981 Welding Principles – Ebasco Services, Inc.
1986 MOVATS Signature Analysis Systems – MOVATS Inc.
1986 Thermal Lag Coatings – TSI, Inc.
1991 Leadership & Team building – AEP Electric Power Company
1993 Asbestos Abatement Contractor Supervisor – WMI Educational Services
1994 HUD Guidelines on Metallic Lead Abatement – WMI Educational Services
1994 Asbestos Abatement Supervisor Re-qualification – WMI Educational Services
1994 OSHA Certified Instructor Construction Industry Standards – Dept. of Labor OSHA Training Institute
1996 Air Permit to Install workshop - Michigan DEQ
1996 Hazard Waste Management - Environmental Resources
1999 OSHA Certified Instructor General Industry Standards – Eastern Michigan University
2001 Process Improvement – Southwestern Michigan College
2002 Ergonomics - University of Michigan
2002 Critical Materials & Wastewater Discharge Reports - Michigan DEQ
2003 ISO14001, Michigan DEQ and Honda Manufacturing
2004 OSHA 30 Hour Course "General Industry" – Nestle University
2005 Industrial Suite (Passport J) Training – DC Cook
2005 OSHA 10 Hour Course "Construction" – DC Cook
2006 Industrial Suite (Passport J) Training – DC Cook

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 4750)

Go to Search Parameters...

Brief Description

Certificate for draughting position. i have been working since 2004 till 2009. i can draw building plan example structural, architure etc. i also can dram 3D drawing using autocad.

Electrical / Instrumentation Controls Designer with Intools, Autocad, & Microstation

diesel equipment mechanic

Sr. E&I designer with over 20 years field engineering experience. US & Canadian citizen/

To be Draughtsman or ass architect. Highly self-motivated and goal-oriented professional committed to pursuing a long-term career in Architecture. Hardworking, able to work in a group of people and share ideas with colleagues, fast learner and willing to learn with positive attitude and has a good o

Major skills are in construction and people management

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

Free! crane driver, rigger,trades assistant,forklift driver , basic scaffolder

B.E Metallurgy & Materials Engineering . I am motivated with good interpersonal skills and communication skills. I try to give my best at what ever I do. I can be a good team member as well as a good team leader as per the requirement.

Certified NAHETS graduate. Completed level I & II and am certified to operate the following: skid steer, backhoe, wheel loader, all-terrain forklift, excavator, bulldozer, motor grader, water truck, and off-road rigid and articulating dump trucks. I hold a current Class B NV CDL and medical card.

I am a Diploma electrical engineer and diploma software engineer. I have also completed courses of PLC/SCADA and CAD/CAM . I have been working as a testing engineer of a Distribution and power transformer since last 7 years.

Alex is a Licensed Civil Engineer by the Philippine Regulation Commission. He graduated Bachelor of Science in Civil Engineering as Cum Laude (Academic Honors) at Central Luzon State University. He is knowledgeable in AutoCAD and STAAD and also on all Microsoft Office Applications.

i am,Graduate in electrical & electronics engg.,having 1year gulf experience as planner/auantity surveyor in various saudi aramco and saudi electicity co. projects

Mechanical Engineer, Autocad, Pro/Engineer, Six Sigma, Planner, Supervisor, Microsoft Office, FE / EIT Exam, Primavera, Thermal-Fluids, Dynamics, Energy, Mechanical, Electrical, Materials

Survey Engineer 10 Years Experience in Land Surevy

Commissioning of Electrical, Electronic control, Instrument and Safety System

Develops schemes and prepares engineering plans for the Fiber In The Loop Networks (FITL) of various key business clients using SDH transmission solutions.

Educational Details: Diploma in Civil Engineering-1999 (Part time)

My experience in construction 6 years with contactor company.

experience in electrician and maintenance and mechanic

I'm an ambitious self-motivated professional,I'm well motivated, I've got a strong desire to succeed, and I'm always ready and willing to learn new information and skills.

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor

I have 34 years experience in my trade. I completed Ordinance Maintenance Course, Advanced Maintenance Course, Advanced Diesel Course, then went on to teach Advanced Diesel Courses while I was in the military.

Logistics 10+ years experience including: Commercial (Mining) project logistics; Humanitarian aid ; and, Military. Transportation & Distribution management; Warehousing; Purchasing. Fluent in both English and French; and computer literate.

Eleven years in various industries enables me to bring a vast knowledge base to any employer. Recent challenges included working in construction with HVAC, fire sprinkler and electrical installations. I use AutoCAD and interpret blueprints. Willing to relocate.

I am a graduate (M.S - Civil Engineering, EIT certified), aspiring to serve the construction industry with a vision to innovate new techniques in my field. The Masters Degree with Structural emphasis, the experience in Geotechnical field and my achievements may be of interest to you.

Seeking a position where I can apply technical and management skills in a dynamic environment and continually face new challenges.

11 years experience in the construction industry Interested in international Opportunities

I am pursuing a position as a Civil Engineer involving design and/or project management. I am seeking to develop my Civil Engineering career and obtain a Professional Engineer license.

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering

Structural design engineer

To seek a challenging position of strategic importance, by making contributions to the organization, by best of my abilities and developing my own skills during interaction. My Motto in life is "Problems are opportunities and never accept defeat in life".

Favourite Subjects: Manufacturing processes and Strength of Materials, Ansys, Autu CAD, Basics of C

Project Management / Construction Management / EPC / EPCM / PMC

Construction Administration/Project Controls

I am looking job in instrumentation field as instrument SUPERVISOR/INSPECTOR/SR.TECH

Contracts Engineer

Analytical, Numerical, Organizational, Computer skills.

Mechanical Draughtsman / Cadd Technitian. / Mep Draftsman / Mep Co-ordinator.

Personable, work hard, and fast learner

Class a CDL, Ecavator operator, Concrete Foreman,

Senior CMMS Engineer and Business Process Engineer with expertise in Oil & Gas plant Enterprise Asset Management with extensive experience in Maintenance, Material Management and Procurement; plant data collection and quality check.

Looking for a challenging position in the field of Civil Engineering, Construction Utilities.

Energy (coal/gas/nuclear) -- ISO 9001 -- ISO 14001 -- Published -- International

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

10 years experience in engineering & design of material handling equipments like coal handling, MSW handling etc.

• 16years of work experience in India/Indonesia in Welding, QC and Site/Construction management in EPC turn key projects (Polymer, CTA, PTA, and Steel). • CSWIP 3.2 Senior Welding Inspector •ASNT NDT Level III in RT, PT & MT •Computer literate in Project Management tools.

Experienced health and Safety professional, excellent Computer Skill, knowledge of H&S MS (OHSAS 18001); EMS (ISO 14001) and QMS (ISO 9000:2000; Qualified Auditor, Training Instructor.

Successfully completed the Final Bill of Saudi Riyal 120 million Steel Plant project (Civil Works) with the Main Contractor Awabeded Ssang Yang- Korea and successfully completed the Internal Audit before the External Audit to obtain ISO 9002 Certification for Company's Quality System.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out