Resume - Commissioning Engineer with substantial experience as Commissioning Process Supe...

Misco Jobs

Resume #82736

CONTACT INFORMATION:
View contact information...

Job Experience
AUGUST 2008 – PRESENT SNAMPROGETTI Saudi Arabia – Pre-Commissioning and Commissioning Activities for Gas Oil Separator Plant in Khurais (Saudi Arabia)
Type of business or sector Chemical and Petrol-Chemical Engineering, Plant design – Pre-Commissioning and Commissioning activities
Occupation or Position held Commissioning Process Supervisor
Main activities and responsibilities * Site Office Pre-Commissioning and Commissioning activities: preparation of system procedure, final issue of System Dossier, Plant System Component List Database. As Built P&ID systemization. Preparation of closed circuit to clean. Updating of Pre-Commissioning schedule. Meetings with services and equipments suppliers
* Field Pre-Commissioning and Commissioning Activities: Blowing / Flushing / Chemical Cleaning; Leak test coordinator; motor solo run; functional test.

AUGUST 2006 – AUGUST 2008 ESI – Commissioning activities for SNAMPROGETTI in San Donato Milanese – Milano – Italy
Type of business or sector Chemical and Petrol-Chemical Engineering, Plant design – Pre-Commissioning, Commissioning and Start-Up activities
Occupation or Position held Commissioning Engineer
Main activities and responsibilities * Home office Pre-Commissioning, Commissioning and Start-Up activities: preparation of System Dossier and Plant System Component List Database. Systemization of first revision of P&ID. Client: SAUDI ARAMCO - Khurais Project - Gas Oil Separator Plant (Saudi Arabia)
* Home office Pre-Commissioning, Commissioning and Start-Up activities: preparation of System Dossier and Plant System Component List Database. Systemization of first revision of P&ID. Client: GASCO Ruwais – NGL Plant (Arab Emirates)
* Preparation of bidding documents for GOSP Plant – Khursaniyah (Saudi Arabia).

JANUARY 2002 – MAY 2005 Sarda Liquidi, Strada 14 Predda Niedda, 07100 in Sassari (Italy)
Type of business or sector Industrial garbage de-silverization and management
Occupation or Position held Process Operator
Main activities and responsibilities * Specification and selection of solutions for the control of pressurized fluids. Equipment monitoring.

FEBRUARY 2000 – MAY 2000 Kosovo Force (KFOR) in Pristina (Kosovo)
Type of business or sector Peacekeeping and population's defense from UCK attacks.
Occupation or Position held Greater Lance-Corporal
Main activities and responsibilities * Power Diesel Generator operator.

JUNE 1998 TO JUNE 2001 152 Regiment of Brigata Sassari, Transmission Dpt. in Sassari (Italy)
Type of business or sector With the purpose to allow an unitary management of the communications of the Army, in this command all the departments of the Brigade Transmissions have been assembled of armed with Rapid Reaction, of the Companies Transmissions of Brigade and direct support
Occupation or Position held
Main activities and responsibilities Greater Lance-Corporal
* Power Diesel Generator operator.

EDUCATION
Technical High School G.M. Angioy (Italy)
Computer Science Diploma
TRAINING
October 2008 – October 2008 Riyadh (Saudi Arabia)
Saudi ARAMCO Work Permit Receiver Course
Course Available for all Disciplines Supervisors/engineers

September 1999 – January 2000 Rome (Italy)
Computer Science Course
Course attendance for Computer Science

February 1999 – April 1999 Rome (Italy)
English Language Course
Course attendance for English Language skills improvement with "Modern English School"

September 1998 – January 1999 Rome (Italy)
Course for Conductor of Power Diesel Generator at the Engineer Military Center.

June 1998 – September 1998 Barletta (Italy)
Voluntary Course in the Italian Army (Infantry Corp.)

LANGUAGES
Mother tongue ITALIAN
ENGLISH FRENCH
Fluency Competent (User)

COMPUTER SKILLS AND COMPETENCIES

Windows; Vista; Unix; Office Package; Oracle; SmartPlant MarkUp; SmartPlant P&ID; AIM; Naviswork, Primavera.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4151 to 4200 of 4806)

Go to Search Parameters...

Brief Description

I have a methodical and well organized approach to work environment and have excellent interpersonal and communication skills. I can very well interface with colleagues at all levels. I have an experience with working in an integrated team environment and can deal with short time frames

Electrical engineer, Matlab, PLC, Labview

Chemical or Laboratory Technician in Edmonton Alberta

Twenty nine years experience in Project Management, Quality Control, Quality Assurance, Engineering, Technical Research and Development, Auditing, Vender Surveillance, Metallurgy, Welding, and Inspection.

I'm specialized in developing new water based decorative paints and in modifying existing decorative paint formulations.

B.Tech in Chemical Technology with Experience in Technical Sales and Services

Qualified Quantity Surveyor with experienced in Cost Planning, Estimating, Budget Control and Monitoring in building, construction and semicoductor industries.

construction/process plant cost estimator, certified project scheduling, projects control

I have gained in excess of twenty five years experience in the construction petrochemical industry which includes offshore and onshore oil & gas projects for such companies as Shell, Arco, McDermott, Hyundai, ConocoPhillips, Premier Oil, Saipem, Unocal and Statoil

Instrument and Electrical Technician/System Integrator with over 10 years of experience in Control Systems, MS SQL and Microsoft Office. Proficient in troubleshooting VFD’s, Process Control, HMI design, construction and troubleshooting of industrial servers and workstations/communications.

Dual Post Graduate Mechanical Engineer with 10 years of experience

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

Experienced Offshore Plater - Coded Welder. Norwegian Survival Certificate, European Survival Certificate, Mexican Work Visa

In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.

Mechanical Engineer with 4+ years of experince in construction of power and oil & gas sector

Perform other work as required. Excellent team worker, function well under pressure, highly motivated toward goal achievement, self motivated, eager to learn, honest and hardworking.

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Degree in Geological Sciences. Experience in laboratory of total and clay mineralogy analysis, sedimentology and petrography. Use of stereomicroscope and polarizing microscopy. Good knowledge of Office programs and basic AutoCAD and ArcGIS program.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

Commissioning Engineer with substantial experience as Commissioning Process Supervisor. Proven ability to provide the highest level of corporate services while consistently reducing time of work. Fully knowledgeable in all aspects of Computer Science, planning, activities coordination. ITA-ENG.

Over 16 years of installation and troubleshooting experience within the instrumentation field in various chemical plants. Also have four years of process chemical operating, troubleshooting, and making recommendations for plant safety, quality and quantity of plant production.

Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.

Network Engineer

Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS

Have 12years of experience in foods, cleaning, warehouse etc.

Deployed as Armed Response Vehicle crew to incidents which require firearms support, including dedicated armed patrols to specific areas of London.

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

Lead Planner, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

SKILLS - HSE issues, mechanical engineering, fluid metering, instrumentation, ability to work and learn fast. QUALIFICATIONS - B.Eng. (Mechanical Engineering) , PGD (Mechanical Engineering)

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc..

I am an American, with over 27 years of experience in the Oil & Gas Industry, with 11 of those years worked internationally. Qualifications include postings at various organizations as Head of Field Operations, Construction Superintendent, Operations Specialist, and AWS Certified Welding Inspector.

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,

I have four years of hands-on benchwork experience in chemistry labs in University of Houston as a research assistant.

Technical, Managment, communication. Skills

Field/Kind/Skill: Accounting, Financ Statement, Tax, Information Manufacture System; Microsoft Word, Excel, Power Point, Access:Visio, Adobe Photoshop, Web Design, SPSS; SAP Business One, Daceasy Accounting & Payroll: Internet

maintaining and operating various types of heavy equipment in the forest industry, building industrial roads, road deactivation

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

Currently working as a procurement engineer in an Engineering Firm in Tokyo Japan engaged in EPC contract works for Petrochemical Plants with minimum 3 years experience

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

Eight (8) years experience as heavy equipment operator local and overseas

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 [ 84 ] 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out