Resume - Experience includes project management, construction management, geotechnical en...

Misco Jobs

Resume #82788

CONTACT INFORMATION:
View contact information...

Summary Experience includes geotechnical engineering, project management, engineering design and resident engineering construction observation. Relevant experience includes performing geotechnical investigations including preparing geotechnical engineering reports; preparing design packages consisting of engineering reports, construction plans, technical specifications, construction cost estimates, bid documents and permitting documents; significant resident engineering experience on a variety of mining, airport and general civil projects; and liaison with various State and Regulatory agencies for permitting and approval processes.

Additionally experienced with Eagle Point, AutoCAD, Land Development and XSTABL engineering software. Also have an intermediate knowledge of the Spanish language.

Education B.S., Civil Engineering, University of Wyoming, 1992
M.S., Civil Engineering, University of Wyoming, 1994

Registration/Certification/Training

Professional Engineer – Montana, License #12814

Professional Experience
Geotechnical Engineering
Responsibilities included directing geotechnical and foundation investigations and preparing geotechnical engineering reports for various types of projects. Experienced in engineering analysis for spread footings, drilled shafts, driven piles and floating raft foundations. Project list includes light to heavy commercial buildings, public and industrial buildings and structures, wind turbines, communications towers, water and fuel tanks, refinery facilities, residences, retaining walls, pavement thickness design, airport apron and runways. Also performed borrow source evaluation for small to large cut to fill earthworks projects, and slope stability studies for various types of structures.

Additional responsibilities included subgrade inspection, spread footing foundation form inspections, slope evaluation, concrete and asphalt inspection and testing, driven pile inspection, drilled shaft inspection and rebar inspection.
Mining
Design
Design engineer for more than 10 million square feet of synthetically lined heap leach pad and tailings facility expansions. Preliminary design work for these projects included performing geotechnical investigations, stability analysis and potential borrow area investigations. Final design work included preparation of construction drawings, engineering design reports and technical specifications. Generally, the entire design package was submitted to State and Regulatory agencies for permitting and approval.

Additional aspects of the design included preparation of an engineer's construction cost estimate and associated bid documents, conducting pre-bid meetings and liaison with State and Regulatory agencies through the permitting and approval process.

In addition to preparing designs for heap leach pads, other significant designs for mining facilities included geosynthetically lined stormwater/process ponds, gravity fed HDPE waste disposal pipelines, stormwater diversion channels and a rehabilitation of an existing asphalt surfaced reusable heap leach pad.

Construction
Resident engineer for more than 25 million square feet of synthetically lined heap leach pad and tailings facility construction, stormwater diversion and process water channel construction, HDPE pipeline construction as well as several other projects. Activities included all works related to construction, including earthworks, synthetic liner placement, concrete placement and HDPE piping systems. Responsibilities to the project included managing quality assurance/quality control activities for all aspects of construction, providing engineering design recommendations and interpretations, conducting weekly progress meetings and general construction observation to determine possible improvements to the design and cost or time savings. Upon completion of a project, a Record of Construction report was typically prepared documenting the construction activities and submitted to State and Regulatory agencies for approval.

Project/Construction Management
Project manager for a variety of mining projects including: tailings dam construction, crushing plant erection and flotation plant erection. Managed design engineers, earthworks contractors, mechanical contractors, EPCM contractors and QA/QC contractors. Prepared, submitted and reviewed bid packages and have awarded contracts. At the end of projects, have successfully negotiated contract closeout and administered proper turnover to operations personnel. Managed a project team which included construction managers, project superintendents, safety personnel, scheduling engineers and cost control personnel.

Airports
Resident engineer for airport improvement projects. General responsibilities included attending pre-bid and pre-construction meetings, reviewing submittals, preparing daily and weekly reports for submittal to the Federal Aviation Administration, managing quality assurance activities, specification interpretation, managing subcontractors, reviewing and preparing pay requests and performing final punch list inspections.

Work History
2002 – Present Consulting Engineer, NJL Consulting, LLC, Various Locations
2001 - 2002 Project Engineer, Maxim Technologies, Inc., Casper, Wyoming
1997 - 2001 Project Engineer, Knight Piesold and Co., Elko, Nevada
1995 – 1997 Project Engineer, Maxim Technologies, Inc., Billings, Montana
1993 - 1995 Staff Engineer, Huntingdon Engineering & Environmental, Inc., Billings, Montana

Project List

* Coeur d'Alene Mines, Kensington Project, Alaska. Project Manager/Construction Manager. Managed consultants in preparation of design drawings and project specifications for construction of a Tailings Treatment Facility, tailings delivery pipeline, reclaim water pipeline, water treatment plant, and all other appurtenances related to construction. Prepared bid packages for all aspects of project. Reviewed bid packages, negotiated contracts and awarded contracts for all aspects of the project. Managed a project team during design and construction which consisted of construction managers, project superintendents, safety supervisors and design engineers. Total project value ~$70 million USD.

* Coeur d'Alene Mines, Palmarejo Project, Mexico. Project Engineer. Designed mine haul roads, surface drainage controls and also created project schedules both for construction and for future planned work.

* Coeur d'Alene Mines, Mina Martha Project, Argentina. Construction Manager for Tailings Storage Facility, crushing and milling plant and flotation plant at the Mina Martha mine. Responsibilities included management of EPCM contractor, earthworks contractor, mechanical contractor, QA/QC contractor and design engineer. Successfully negotiated contract closeouts with all parties involved. Total project value ~$15 million USD.

* Confidential Client, Bolivia. Performed geotechnical and site investigation for proposed 25 M tonne tailings storage facility.

* Florida Power and Light, Abilene, Texas. Performed geotechnical site investigation for 150 wind turbines. Subsurface conditions consisted of caliche overlying weathered to durable limestone. Upon completion of the site investigation, monitored foundation excavation and construction, which included: placement of structural fill and backfill, rebar inspection, concrete placement and base grouting. Some voids were encountered in the limestone formation, which required pressure grouting prior to foundation construction.

* Various Tailings Storage Facility design projects - Accra, Ghana. Design services included water balance analysis, design drawing preparation, specification preparation, bid document preparation and design report preparation. Additional responsibilities included resident engineering services and dam safety inspections.

* Newmont Gold Company, Cerro Yanacocha Stage 5 Heap Leach Pad. Provided resident engineering, design engineering and construction management services for the 500,000 square meter, synthetic lined heap leach pad expansion. The leach pad construction involved removal of over 500,000 cubic meters of unsuitable material and placement of 300,000 cubic meters of controlled fill. The leach pad consisted of compacted subgrade overlain by a low permeability soil liner, covered with HDPE lining and a drainage system on the HDPE liner consisting of various sizes of underdrain pipes embedded within a permeable drainage blanket. Responsibilities on the project included preparing design changes in the field when necessary, general overall observation of the construction progress to determine potential methods for improved design and cost savings.

* Newmont Gold Company, South Area Operations, Phase V, Non-Property Heap Leach Pad, Construction. Provided resident engineering services for the 1.2 million square foot, synthetic lined heap leach pad expansion, 30 million gallon stormwater pond and diversion channels. The leach pad construction consisted of compacted subgrade overlain by a low permeability soil liner, covered with HDPE lining and a drainage system on the HDPE liner consisting of various sizes of underdrain pipes embedded within a permeable drainage blanket. The storm pond consisted of cut and fill operations to complete embankment and basin construction with an HDPE liner on the completed surface. Responsibilities on the project included managing quality assurance/quality control activities for the earthwork, the HDPE liner, geotextile and geonet installation and the placement of the HDPE and CPT piping. Additional responsibilities included preparation of design changes when necessary and preparation of a Record of Construction report for submittal to State and Regulatory agencies.

* Newmont Gold Company, North Area Operations, Phase VI Construction. Provided resident engineering services for the 4.5 million square foot, synthetic lined heap leach pad expansion and diversion channels. The leach pad construction consisted of compacted subgrade overlain by a low permeable soil liner, covered with HDPE lining and a drainage system on the HDPE liner consisting of various size underdrain pipes embedded within a permeable drainage blanket. As part of the expansion, one deep monitoring well was abandoned and a replacement installed. Three diversion channels were constructed to the south and east of the expansion to divert stormwater away from the leach pad. Responsibilities to the project included managing quality assurance/quality control activities for the earthwork, the HDPE liner, geotextile and geonet installation and the placement of the HDPE and CPT piping. Additional responsibilities included preparation of design changes when necessary and a Record of Construction report for submittal to State and Regulatory agencies.

* Round Mountain Gold Corporation, West Dedicated Leach Pad, Phase 2 Construction. Provided project engineering and resident engineering services for a 6 million square foot heap leach pad, two 20-million gallon solution storage ponds, a stormwater/sediment retention pond and a buried solution channel. Responsibilities to the design included assisting in the preparation of an engineer's construction cost estimate, bid documents, construction plans and specifications. Responsibilities to construction of the project included managing quality assurance/quality control activities for earthwork, concrete, HDPE liner, geotextile and geonet installation and placement of HDPE and CPT piping. Additional responsibilities included preparation of design changes when necessary and preparation of a Record of Construction report for submittal to State and Regulatory agencies.

* Round Mountain Gold Corporation, Reusable Leach Pad Design and Construction. The project consisted of repairing the pavement section on a portion of the reusable asphalt leach pad. Work included preparation of construction drawings and specifications, preparation of an engineer's construction cost estimate and quality assurance testing during placement of over 10,000 tons of bituminous mixture. Following construction, a Record of Construction report was prepared for submittal to State and Regulatory agencies.

* Round Mountain Gold Corporation, Tailings Impoundment Facility, Cell 1, Stage 1 Design and Construction. Provided engineering services for a 1.5 million square foot basin expansion. Responsibilities included preparing construction drawings and specifications, preparing an engineer's construction cost estimate, general oversight of quality assurance activities during construction and preparation of a Record of Construction report for submittal to State and Regulatory agencies.

* Newmont Gold Company, South Area Operations, ROTP Secondary Containment Redesign and Construction. The project involved replacing existing single wall piping within the ROTP facility with pre-fabricated double-wall HDPE piping. Work consisted of preparing construction drawings and specifications, bid documents and an engineer's construction cost estimate. Upon completion of construction, a Record of Construction report was prepared for submittal to State and Regulatory agencies.

* Round Mountain Gold Corporation, West Dedicated Leach Pad, Phase 3 Design. Project engineer in charge for design of a 5.5 million square foot synthetic lined heap leach pad and associated 20 million gallon event pond. Work on the project included performing stability analysis, performing a geotechnical investigation, identifying borrow sources of suitable material for construction, preparation of construction drawings and specifications and preparation of a final design report for submittal to State and Regulatory agencies for permitting. Additional responsibilities included preparation of an engineer's construction cost estimate and bid documents, conducting pre-bid meetings with contractors and liaison with State and Regulatory agencies.

* Round Mountain Gold Corporation, Tailings Impoundment Facility, Cell 1, Stage 2, Design and Construction. Design work on the project included performing a stability analysis, performing a hydrologic review for design of diversion channels, preparation of construction drawings and specifications, an engineer's construction cost estimate and bid documents as well as conducting pre-bid meetings with contractors. Work on construction consisted of providing resident engineering services, which included managing quality assurance/quality control activities for earthwork, HDPE liner installation, placement of HDPE and CPT piping and installation of piezometer cable and readout stands. Additional work included preparation of a Record of Construction report for submittal to State and Regulatory agencies.

* Round Mountain Gold Corporation, West Dedicated Leach Pad, Phase 3 Construction. Provided resident engineering services for construction of a 5.5 million square foot synthetic lined heap leach pad and associated 20 million gallon event pond. Responsibilities included managing quality assurance/quality control activities for earthwork, concrete, HDPE liner and geotextile installation and placement of HDPE and CPT piping. Additional responsibilities included preparation of design changes when necessary and the Record of Construction report for submittal to State and Regulatory agencies.

Airports

* Lander County, Nevada, Austin Airport, pavement investigation. Performed geotechnical investigation for apron and taxiway reconstruction. This work involved performing a field investigation, completing laboratory testing and preparing an engineering report with pavement recommendations based on guidelines presented in FAA Circular 150/5320-6D.

* Lander County, Nevada, Battle Mountain Airport. Performed geotechnical investigation for airport apron rehabilitation. Investigation involved performing a field investigation, completing laboratory testing and preparation of an engineering report with pavement recommendations based on guidelines presented by FAA Circular 150/5320-6D. Additional work at this airport included providing resident engineering services for rehabilitation of the apron. This work involved attending pre-bid and pre-construction meetings, reviewing submittals, preparing weekly and daily reports for submittal to the FAA, managing quality assurance activities, specification interpretation, managing subcontractors, reviewing and preparing pay requests and performing final punch list inspections.

* Stanford Airport, Stanford, Montana. Work on the project consisted of performing a geotechnical investigation on the main runway for rehabilitation/reconstruction. Alternatives investigated included 1) total reconstruction of the runway, 2) partial reconstruction of the runway, including milling off the existing asphalt and utilizing the material as base course overlain by asphalt surfacing, 3) asphalt overlay of the existing runway following extensive patch and seal repairs.

* Logan International Airport, Billings, Montana, Apron Reconstruction. Responsibilities on the project included performing quality assurance testing of concrete during reconstruction of a portion of the main apron. Work on the project consisted of casting concrete cylinders and beams for compressive and flexural strength testing as well as performing slump and air testing of concrete during placement.

Deep Foundations

* Saint Vincents Hospital Expansion, Billings, Montana. Provided geotechnical engineering analysis for the expansion. Bedrock in the expansion area ranged in depth from approximately 7 feet to 25 feet and the overburden soils consisted of soft clays and compressible sands. Steel H-piles were used to support the expansion. Pile driving was monitored to insure the steel piles were driven to the appropriate depth and that they were not overstressed during driving.

* Retail development, Billings, Montana. Provided geotechnical engineering analysis and construction monitoring for driven piles installed for a retail development constructed in Billings, Montana. The project was constructed on an abandoned gravel pit which had been backfilled with various types of construction debris, including concrete. The buildings structural loads as well as the floor system were supported by steel H-piles driven through the debris and into the underlying bedrock.

* Northern Rockies Cancer Center Expansion, Billings, Montana. Responsibilities on the project included inspection of the installation of drilled shafts. Specific tasks included inspection to insure that shafts were installed to their appropriate depth, on the appropriate bearing stratum in addition to control testing of concrete as it was placed into the drilled shaft.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 4757)

Go to Search Parameters...

Brief Description

B.Tech Engineer with an heavy equipment experience.

B. Sc. in Civil Engineering & MBA in Riyadh, Saudi Arabia

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Over 7 years of experiences in Project Planning, Project Control, Project Coordination for Oil and Gas Projects, Refinery and Gas Turbine Power Plant ,B.E in Civil Eng.,Certificate course in Primavera Ver . P3, Pe/c Ver.3.5 and Pe/c Ver 5.0,MS Project and MS office applications,AutoCAD 2000

Experience in software is the leading developer of computer-assisted thinking programs for businesses in the field of project planning, problem solving, and negotiating.

Maintenance mechanic

Diploma Information Technology-lay utp cable and fiber optics cable,terminate utp cable and splice fiber optics cable,install wireless

A Chemical Engineer with 10 years of experience in Procurement in Oil/Gas and Minerals Industry

I have Bachelors Degree in Mechanical Engineering with 18 years Experience India, Middle East and African countries in Oil, Gas sector both onshore and offshore fields.

Senior EPC/EPCM Manager with +30 years experience of successful multi-disciplined project & program management; successfully organizing, managing and directing large mining, heavy civil and infrastructure projects

Certificate in Project Management Course from IIT Delhi B.E (Mechanical) 2000, Diploma: D.M.E. 1997, Mumbai BoardPrimavera, CEASARII (Ver. 4.4)

BE electrical, Micro Station, AutoCAD and MS Office

Experienced oil/gas/mining/heavy civil project manager. Currently PMT Construction Manager on $8.5 billion dollar project.

Experience includes project management, construction management, geotechnical engineering, engineering design and resident engineering construction observation.

SUPERVISOR AUTOMOTIVE FACTORY, RESIDENTUAL / COMMERICAL SUPERINTENDENT

B.S. Mechanical Engineer. Member of Mechanical Engineer’s Chamber / TURKEY; Qualifications : Bachelor of Science in Mechanical Engineering (University of Anadolu / TURKEY 1980-1984) , Certified Welding Inspector ( CSWIP 3.1, Cert No: 37291, E

I am Rosalie A, Aguzar proficient in Architectural Plans using Autocad with basic knowledge on 3ds Max (Architectural Design), Revit 2009 & Sketchup.

Project Interface Manager, Stategy Planning, Engineering/Projects Development/Management/Controls

I am a diploma holder in mechanical engineering and more than 9years experiance inthe field of fabrication

Having worked in three countries in industries such as: Printing, Tourism, Piping Fabrication, Oil and Gas construction and erection projects

i am a new zealand registered electricain , my apprentiship was in substation construction and maintaince which i completed in 2006 .I currently live in london but will be moving to melbourne in the new year

Job Title : Service, Erection and Maintenance Engineer - Maintenance & Trouble shooting skills - Installation, Repair, commissioning and STart Up of Boilers. Stron Communication Skills. Training Courses

Continuous opportunity for professional development in the field of Manangement and Business Administration, Banking and Marketing as well as Procurement and Logistics.

I am working in oil, gas and offshore projects and plants from 14 yrs in india, middle east and europe for multinationals for erection, commissioing and projects.

I have a Masters degree in Civil Engineering. I am seeking a job in the industry to apply skills obtained throughout my training and thereby improve my own abilities and achieve better understanding of the diverse field of Civil Engineering.

Application of specialized softwares for engineering design with opportunities in project leadership

Looks forward to a challenging career as a Engineer in Oil, Gas, Petrochemical, Fertilizer, Power, Nuclear and Chemical related heavy process equipments fabrication, machining and Construction industries. In depth knowledge in Construction industries and process industries.

Civil engineer who is familiar with all aspects of concrete and steel structures, design and analysis , high rise building , finite-elements method and last software packages in structural analysis. Executive sector of the great projects for water distribution and its related pumping stations

Career Objective I am looking forward to develop my academic background and career related experience in Construction field.

Ingegnere Meccanico, laureato a Pisa con Master of Science in Metallurgical and Materials Engineering dalla Colorado School of Mines, Golden, CO USA. Italiano come madre lingua, ottimo Inglese, Francese, Tedesco e Spagnolo colloquial

University rate and degree of the master on a specialty «Construction of mines and underground building», specialization – underground - construction. Participated in development and a substantiation of a new way of construction of some sites of the underground in Donetsk region.

Structural Design engineer M. Tech(Structures)having more than 4.0 years experience of designing RCC and Steel Building. Having knowledge of Structural software STAAD PRO etc. Having exposure of Indian & USA based codes like IBC-2000. Having experience in pre-engineering bldg & conventional.

expertise in environmental water policy and economic background. Currently working at the Ministry of Water and Irrigation in Jordan as an advisor and assistant to the Minister Dr Hazim El-Naser.

Respected Sir, Please accept this letter as application for a suitable post in Sales / Marketing in your esteemed organization.

Civil engineer with extensive experience in overseas contract management including West Africa.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

management experience of a wide variety of environmental projects including international HSEMS, development and implementation of environmental management systems, development and provision of audits and training courses.

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction,

Onshore/Offshore Medic,very experienced medical doctor with long years of medical service

Instrument & DCS Specifications datasheets, I/O list preparation, JB,Cable schedule, Logic Diagrams, Wiring Diagrams, Cable and Tray routing, hook-up Drawings, Installation Standards, MTO, Technical Procurement assistance, DCS Detailed Engineering, Project, construction and commissioning activitie

certified QC inspector with 4 plus years of experience, handling all stage inspections of piping, vessals,structruals. welding inspection , familiar with international codes and standards

Highly Experienced Operations Leader with expertise in guiding fundamental growth in the heavy equipment and manufacturing industries.

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

MSc. Civil Engineer, major: Land Surveying; 19 years experience of cadastral (legal) and public utilities and road surveying and topographical mapping

Lead six sigma, APQP, cost savings

Experienced Rigger

Conducting different jobs related training, Conducting Safety Tool Box training, preparing risk assessment and method statements for critical and high risk activities. Inspection of Rigging and Lifting tool and monitoring for safe rigging operations. Giving basic training to employees on fire fighti

Field Machinist/Millwright

Some offshore certificates, good knowledge of construction and offshore trades, strong worker, easy to get along with

Graduated in 2000 with a BSc in Architecture. Since then, I have been involved in the supervision of site works and the execution of architectural finishes in addition to the review of shop drawings for major mixed-use developments and tourist resorts in Egypt.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out