Resume - Fifteen years of experience in piping construction and piping engineering activi...

Misco Jobs

Resume #83907

CONTACT INFORMATION:
View contact information...

Summary of Experience:
Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.
Areas of experience include construction coordination activities, piping design, construction supervision activities for piping pre-fabrication and installation, surface production facilities, oil refining, gas processing.

Detail of Experience:

Project: TERMOZULIA II, 500MW Combined Cycle Power Plant for ENELVEN. Maracaibo. Zulia State.
Investment: 500 MM$ (EPC project)
Company: JANTESA
Date: 2007 - Actual
Position: Piping superintendent
Description: Piping superintendent in charge of all construction activities, testing and mechanical completion of a combined cycle power plant

Project: Replacement of Tia Juana I, Gas Compressor Plant for PDVSA. Maracaibo Lake. Zulia State.
Investment: 100 MM$ (EPC project)
Company: JANTESA
Date: 2004 - 2007
Position: Piping superintendent
Description: Basic engineering phase coordinator (design of all sub-sea gas pipelines gathering system)
Construction coordinator in charge of planning and follow up activities (civil, electrical, instrumentation, mechanical, piping) of one compression module (capacity 100MMSCFD) and one inlet and discharge module, both located in the Maracaibo Lake.

Project: Valcor Project for PDVSA. Puerto La Cruz Refinery, Anzoátegui State.
Investment: 400 MM$ (EPC project)
Company: JANTESA (Consortium: Japan Gas Corporation (JGC)-Chiyoda-JANTESA-VEPICA)
Date: 2002 - 2004
Position: Piping superintendent
Description: Piping superintendent in charge of construction activities, testing and mechanical completion of units related to the continuous catalytic reformer and naphtha hydro treating unit.

Project: Cerro Negro Upgrader Project for Mobil-PDVSA-Veba Oil. Jose, Anzoátegui State.
Investment: 500 MM$ (EPC project)
Company: JANTESA (Consortium: Japan Gas Corporation (JGC)-JANTESA-VEPICA)
Date: 1999 - 2001
Position: Piping supervisor
Description: Piping supervisor in charge of construction activities, testing and mechanical completion of a waste water treatment unit, naphtha hydro treating unit and delay coker unit. Resident piping supervisor (at pre-fabrication shop located in Zulia State) in charge of construction, engineering, material control and progress activities.

Project: Process Safety Management Project (PSM) for PDVSA. Maracaibo Lake, Zulia State. (Detail engineering)
Company: JANTESA
Date: 1998 - 1999
Position: Piping design engineer
Description: Development of plot plans and piping plan drawings of offshore gas compression platforms (flow handling capacities from 60 MMSCFPD up to 400 MMSCFPD).

Project: Acema Field Production Facilities Project for Pérez Companc. El Tigre, Anzoátegui State. (Detail engineering)
Company: JANTESA
Date: 1998
Position: Piping design engineer
Description: Development of piping plan drawings, piping isometrics, piping stress analysis, construction specifications, material take off related to surface production facilities (flow station & water injection plant)

Project: West Urdaneta Field Reactivation Project for Shell Venezuela. Maracaibo Lake, Zulia State.
Investment: 250 MM$ (EPC project)
Company: JANTESA (Consortium: JANTESA - BECHTEL)
Date: 1996 - 1997
Position: Piping supervisor / certification engineer
Description: Piping supervision and follow up activities for piping erection, test and mechanical completion at on-shore construction yards and offshore facilities. Procurement and material expediting activities. Coordination of mechanical completion activities related to piping systems and mechanical equipment prior to commissioning and start up phases.

Project: Boscán Field Reactivation Project for Chevron. Maracaibo, Zulia State. (Basic engineering)
Company: JANTESA (Consortium: JANTESA - BECHTEL)
Date: 1996
Position: Piping design engineer
Description: Basic engineering phase, field data collection for development of plot plans, preliminary piping plans and piping and instrumentation diagrams of different flow stations at Boscán Field.

Project: Cardón Refinery Expansion Project, Package B Facilities for Maraven. Punto Fijo, Falcón State.
Investment: 400 MM$ (EPC project)
Company: JANTESA (Consortium: JANTESA - BECHTEL)
Date: 1994 - 1996
Position: Rigging supervisor / certification engineer
Description: Inspection of transportation, rigging, lifting and jacking activities of process and piperack modules and heavy equipments. Coordination of mechanical completion activities related to piping systems and mechanical equipment prior to commissioning and start up phases.

Company: Enplast (Thermoplastic processing plant)
Date: 1993
Position: Production engineer
Description: Production engineer in charge of daily production activities and maintenance department..

Company: JANTESA
Date: 1992 - 1993
Position: University thesis work
Description: Development of a computer program for piping stress analysis based in the finite element method.

Company: PEQUIVEN (Venezuelan petrochemical company)
Date: 1991
Position: University working practice
Description: Development of a computer program to calculate quantities of thermal insulation and refractory material for piping, tanks and furnaces.

Computer Skills:
MS Office, FORTRAN, Basic, Turbo Basic, Visual Basic, MatLab, AutoCAD, Auto Pipe, Caesar II

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 4772)

Go to Search Parameters...

Brief Description

3 years experience in the field of Warehousing, Sound educational background and knowledge of Logistics & SCM Industry, Forward thinking having great attention to detail, Independent, self motivated and able to work under pressure, Excellent PC skills and working knowledge of MS office package.

Marine Civil Construction Supervisor

Comprehensive problem solving abilities, good verbal and written communication skills, Ability to deal with people diplomatically, willingness to learn, Team facilitator.

Bachelor of Science of Electrical Engineer, Drafting Aide Certificate AutoCAD 2009, CAD Operator Certificate AutoCAD 2009, Member of Phi Theta Kappa International Honor Society, Member of National Technical Honor Society, Dean List for 2008-2009

HSE

Mine Manager/Engineer as well as Project Manager. Experience managing existing concerns as well as greenfield projects. Fully knowledgeable in Administration, feasibility studies etc. Team player and able to work with and manage multi national teams internationaly.

Construction Engineer

I'm A Civil Engineer graduate with 14 years experience in the Gulf country seeking for new job.

I am a 29 year old white Kenyan. I am a Logistics consultant specializing in Warehousing and Mechanical handling training.

EPC Project Contracts 'Interface/Liaison' Administration Specialist

I am a Health, Safety and Environmental Engineer presently working for EEI Nouvelle Caledonie/INCO Australia Management Pty, Ltd here in New Caledonia. I have been working as Safety Engineer for more than 5 years. my contract here will end by end of December and i'm looking now for my next job.

looking for work in the electrical field. 19 years exp. 3yrs. as an owner

17 years of expereince in the field of telecom

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

Jean-Francois Zaky is a construction manager in a well-established construction company in Houston, Texas. Mr. Zaky has more than 11 years experience in the construction business. He is a U.S. citizen born in Houston, Texas. Mr. Zaky speaks fluent Arabic language.

Degreed Construction Superintendent for both Commercial and Residential projects with over 15 years of experience.

Heavy Equipment Operator

Registered Safety Officer (IBOESH, USA), Registered Civil Engineer-Philippines, IASP, IADC, RIGPASS Certified

Arc welding all positions all 60 series, 70 series, and 80 series welding rods. Torching and brazing. Rigging of all materials over head either from crane or chain falls or sky track indoor and outdoor. Certified in erecting scaffling. Excellent in layout for installations. Certified in rigging, aer

Civil Engineer specialized on Structures working towards Masters Degree.

I am a qualified mechanical Engineer specialized in Acoustics

Mechanical Supervisor

Journeyman Plumber and Gasfitter

Diploma in Civil Engineering (3 Years)

Planning & Scheduling Engineer with more than 4 years experience in India & Gulf

Documentation Controlling System with Electronic & Manually with Proper Procedure and i am qualified in DCE , Computer Application

Handles a group of people with a different kinds of work trade in quality assurance, inspection, records, work evaluation and recommendation.

PROCURE A POSITION AS PROJECT MANAGER CONSULTANT

Maintenance Manager/Welder Skills include Management, Design, welding, machinist, hydraulics, electrical, HVAC, mechanical, fabrication,and construction.

Almost 14 years of experience in the Project engineering, system design and detailed engineering of 400/220 kV AC substations and ¡Ó500 kV HVDC Substations.

25 years experience in OSP project management, inspection, route selection, planning and engineering - Bilingual English/Spanish

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

Electrical Engineer with 12 years experience mainly with GE USA in the field of industrial project in steel, power and coal sector

Fifteen years in human resource (HR) leadership roles. Certified by SHRM as a SPHR, MBA with experience administering/interpreting HR policies and developing/implementing innovative people practices to increase profitability. Certified Team Leader/Facilitator and TQM Tools Trainer.

Qualification Bachelor Degree in Civil Engineering Total Professional Experience 14 Years and 2 Months –Include 4 years and 9 months in Singapore & 2 yrs. in Malaysia.

Electrical Engnineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

To work in a physically active and customer focused position using my vocational communication and practical skills and time management. Over 18 years experience as an electrician and supervisor in different firms. Project delivery. Excellent analytical, problem solving skills and breakdown.

To secure a challenging position in an environment which provides opportunities on acquired expertise and experience as well as a position with career growth potential in a competitive aerospace.

Responsible all electrical installations, wiring, piping, motor control

More than 18 years of experience of welding operation such as Supervision & QA/QC Department in Power Plant, Refinery Plant, Petrochemical Plant, & GAS plant.

B.tech in mechanical engineering with 4+ years of experience in pre-engineering metal building steel structurals

Qualification : M.Sc. Geoinformatics , Skills: AutoCAD2008,ESRI’s Arc View 3.2a,ESRI’s Arc GIS-Arc Map 9.2,,ERDAS Imagine 9.1,ENVI ( Environmental Visualizing Image )

Graduate Civil Engineer from a reputed institution of India having experience in Quantity Survey & Contracts in projects across the Gulf, currently working with one of the premier infrastructure companies of the Middle East, seeking suitable long term career opportunities.

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

20 years overseas contracting, Mining and Construction

I am a professional engineer with over five years of experience in Land Development. I have a strong background in grading, drainage, water, wastewater, and paving design. My project management skills include contract writing, work planning, budget management, invoicing, and A/R collections.

Through 5 years of Collage 5 years on on site experience i have a broad base to develop my careew with the right company.

Nebosh holder, driving licence-uae, hard worker, professional touch, good team player, work under risky conditions

Registered Civil Engineer with 5 yrs experience as quantity surveyor in contruction industry

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out