Resume - Able to prepare welding procedure/ welder qualifications, organize for hydostati...

Misco Jobs

Resume #84127

CONTACT INFORMATION:
View contact information...

WELDING INSPECTOR (AWS CWI)

Career Summary

18+ years of experience in engineering and construction activities in Oil field, Petrochemical, Refinery and gas handling projects.
* Broad knowledge of oil and gas facilities and construction management.
* Demonstrated experience in various projects.
* Review of project QA/QC and HSE plans and monitor for the system implementation.
* Review all procedures, Quality inspection test plan and method statements prior to commencement of any activity.
* Prepare WPS, monitoring the procedure qualifications and subsequent welder qualifications, piping/pipeline welding inspection, pressure test and coordination with sub con/client.
* Verify welder performance records and recommend steps to minimize weld repair rates.
* Verify and maintain the calibration status of necessary Inspection & Testing Equipment.
* Ensure that all the required tests are properly conducted and reports submitted on them.
* Preparation of final dossier and handover to Commissioning team.

Educational Qualification: Diploma in Electrical and Electronics Engineering.

Technical Qualifications: AWS CWI (CERT. NO: 08082441).
ASNT NDT Level II RI
ASNT NDT Level II MT
ASNT NDT Level II PT

Trainings Attended: Construction Risk Assessment from TOTAL E & P
YEMEN.
Valid driving permit from TOTAL E & P YEMEN.

Key responsibilities and functions

* Observe all safety regulations.
* Planning, management and coordination of all activities associated with the construction, installation and commissioning of oil and gas facilities.
* Review that materials supplied by Contractor have Inspection Release notes from recognized Third party inspection agencies.
* Report to QA/QC manager on the performance of the Quality Management Systems and the need for improvement.
* Active liaison between various groups on the project, including engineering, construction and installation contractors/Operations.
* Responsible for establishing and ensuring that preventive action are implemented and corrective actions are taken within the area of responsibility.
* Establish and maintain liaison with the Client's QA/QC representatives.
* Monitor the status and disposition of any non-conformity on the project.
* Provide response based on root cause analysis for quality issues, and corrective action requests.
* Visual testing of welds for meeting codes and client specifications.
* Coordinate for NDE's with third party inspections when necessary.
* Release pipelines and piping for hydro testing.
* Quality surveillance, witness for hydro testing and documentation review.
* Carry out final inspection, prepare punch/ defect list and any other document, certify and clear for pre-commissioning activities.
* Preparation of contractor performance report and project close out report.
* Represent company in all meetings/discussions with the Client's QA/QC representatives.
* Initiate, organize and chair weekly site technical meetings and monthly progress meetings and report on them.
* Ensure that Contractor / Employer's obligations under the agreement are strictly adhered to.
* Review the training program submitted by the Contractor to ensure that it is beneficial to the Client.
* Assist in performance of Internal Quality Audits and ensure any corrective actions needed are followed up and cleared.
* Coordination of shut down activities, as applicable
* support for ISO certification and training compliance
Employers Profile:

01. Masarco Oil Field Services Co, Yemen - September 2003 to till.

Client: Total Exploration and Production at Kharir block-10.

Position: Senior QA / QC Engineer(Welding inspector)

02. M/S.Unitech Machines Ltd, New Delhi - July 1996 to August 2003

Position: QA/ QC Engineer

03. Gulf engineers & Constructors Pvt Ltd, Chennai - Feb¡¦91 to June ¡¥96

Position: Piping Supervisor

Personal Summary
Date of birth 07.05.1970

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 4757)

Go to Search Parameters...

Brief Description

worked as junior engineer on various projects around the world. Adapt easily to harsh conditions.

I am searching for employment with a company that has satiability and longevity.

Total Experience is of twelve Years encompassing Senior Civil Engineer for Eight Years and Site Engineer for Five years and as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

Over Ten (10) Years of solid working experience in the sales and customer service environments for Radiology Equipment & Spare parts, Laboratories Equipment & Accessories, Nuclear Medicine, and QC/QA Test Tools. Maintain excellent customer service skills and a proven record as a top sales performer.

20 yrs exp residential contractor

Mechanical engineer with nearly 13 yrs experience in petrochemicals and power plants as project and maintanence engineer

MICROSTATION V8

Passed the licensure examination for Civil Engineers last May 2008. Have 1-yr experience in construction managament. Have knowledge on Excel and CAD Programs. Hard working. Good in oral and communications skill.

3 years working in the construction site with arabtec u.a.e. projects such as dubai airport, DIFC, and now in infinity tower

Skilled painter with experience in the industry.

ERECTION AND COMMISSIONING ACTIVITES

Senior Estimation Engineer for oil and gas construction projects

Circa 30 years work experience (10 years Middle-East / Africa)

25+ years Upstream Project Controls Management across all stages of Oil & Gas E&P Business Process Life Cycle:

Presently I am working in Wade Adams Dubai As a Health&Safety Officer

M.E. Civil in Transportation Engineer with I-Class

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.

Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT

Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.

Implementation Manager or Technical Project manager

Interprets plans, conducting quality control as inspector, preparing welding procedures as a welding engineer, and controlling/monitoring project activities/ preparing documents for the fabrication of boiler components shall hopefully contribute to your requirements.

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

for a vacancy in your organization for Quantity Surveyor / Civil Engineer.

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.

Contracts Engineer, Cost Engineer, Quantity Surveyor

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Graduate Civil Engineer working as Senior Quantity Surveyor with over 13 years of experience in construction industry ranging from Bridges, Highways and Building structures. I have also been designated as a Certified Cost Engineer by the AACEI in October 2008. Well versed with FIDIC, CESSM3 & POMI

I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.

HND Architecture, PGD Architecture, MBA

A pioneering, professionally qualified and hard working Graduate Quantity Surveyor narrowed towards achieving goals in a competitive environment

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

Diploma in Civil engineering, Experienced in Architectural drafting, Detailings in Autocad, Site supervisions, Experience of 7 years in similar field.

IT Manager

I am a civil engineering diploma holder with 8 years exp.in high rise residential and commercial buildings.

Several years of experience in CAD drafting in wood carpentry including 10 months work in Middle East, at present I work as Bulk Handling Design Engineer in a European company, part of my work is to design bulk handling system of cement cargo ship and supply vessels including loaders and unloaders,

NVQ level 2 Scaffolder with 8 years experience and offshore experience. Offshore survival and full medical

Advanced skills for professional design in 3D (Autodesk Inventor 2009)

Computers, home building from foundation up. Media instalations (cable industry work)

Bulldozer Operator, performed pre and post operation of the bulldozer

Master Electrician

11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

sr;mechanical engineer /project engineer/construction engineer/manager/engineer

Program/Project Manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out