Resume - Site safety inspection • Driving • Basic Investigation • Knowledge in Basic prog...

Misco Jobs

Resume #84160

CONTACT INFORMATION:
View contact information...

Birth date: November 23, 1973
Birthplace: Philippines
Height: 5'10
Citizenship: Filipino
Date of Expiry: June 03, 2011

Course: Computer Technician
System Technology Institute
Balanga City, Bataan, Philippines

Course: Electricity
T.E.S.D.A. Ptc – Orion Bataan
Philippines

* Hardworking, punctual with ability to work under pressure
* Well discipline in following orders
* Computer literate

BASIC SCAFFOLDING AWARENESS
GL – Germanischer Lloyd Industrial Services GmbH, P.O. Box 55938
Doha State of Qatar
January 16 – 21, 2009

BASIC LIFE SUPPORT & FIRST AID PROVIDER COURSE
Hamad Medical Corporation
Hamad International Training Center
Doha State of Qatar
December 30 – 31, 2008

HSE TRAINING FOR CONSTRUCTION SITE SAFETY OFFICER
Enerlink Management and Consultancy, Inc.
Mandaluyong City, Philippines
October 6 – 10, 2008

CONSTRUCTION SAFETY INSPECTION
Amtek Consulting
Manila, Philippines
September 13 – 14, 2004

SAFETY AT THE CONSTRUCTION SITE
Petron Corporation
Limay, Bataan, Philippines
April 15, 2004

BASIC CONSTRUCTION SAFETY
Global Safety Services
Petron Mega Plaza Makati City, Philippines
May 24, 2003

November 2008 to present
Safety Officer
Al Huda Engineering Works
Doha State of Qatar

Duties and Responsibilities

* Conduct safety orientation to all the new workers that are going to work in our site.
* Conduct daily toolbox meeting
* Ensure proper handling of materials and maintenance of equipment.
* In – charge in monitoring the man hours.
* Assess and prevent work related accident and formulate preventive measures.
* Ensures regulatory compliance to health and safety programs.
* Identifies job hazard and regulate necessary controls
* Conduct safety awareness activities the immediate area of responsibility.

September – October 2008
Safety Officer
Antack Construction Co.

Duties and Responsibilities

* Ensure proper handling of materials and maintenance of equipment.
* Conduct safety awareness activities the immediate area of responsibility.
* In – charge in monitoring the proper used of personal protective equipment.
* Identifies job hazard and regulate necessary controls.
* Assess and prevent work related accident and formulate preventive measures.
* Develop and promote relevant safety procedures applicable to the company.
* Conduct in – house training orientation and safety awareness to all the workers.
* Ensures regulatory compliance to health and safety programs.
* Conduct daily inspection in the site

March 2007 – August 2008
Safety Officer
Caltex Macau Ltd.
21st floor Itak Building, Macau

Duties and Responsibilities

* Responsible for the safety of the delivery of LPG and lubricants.
* Ensure proper handling of materials and maintenance of equipment.
* Conduct safety awareness program within the immediate area of responsibility.
* In – charge in monitoring the proper used of personal protective equipment.
* Identifies job hazard and regulate necessary controls.

December 26, 2004 - July 2006
Waiter
Coral Botique Hotel Appartment
Al Barsha, Dubai, UAE

Duties and Responsibilities

* Table setting
* Outside catering

January 2001 – November 2004
Safety Officer
Antack Construction Co.

Duties and Responsibilities

* Conduct daily toolbox meeting
* Conduct safety awareness activities the immediate area of responsibility.
* In – charge in monitoring the proper used of personal protective equipment.
* Identifies job hazard and regulate necessary controls.
* Assess and prevent work related accident and formulate preventive measures.
* Develop and promote relevant safety procedures applicable to the company.
* Conduct in – house training orientation and safety awareness to all the workers.
* Ensures regulatory compliance to health and safety programs.
* Evaluates the combination of different materials to be used in the project.

January 2000 – December 2000
Jr Safety Officer
Antack Construction Co.

Duties and Responsibilities

* Testing of new tools and equipment for safety evaluation.
* In – charge in preparation of schedule for daily activities.
* Identifies job hazard and the corresponding necessary controls at jobsite.
* Assist in daily toolbox meeting.
* Attends seminars and safety programs.
* Practice and monitor safety programs during field works.
* Initiates and monitor safety procedures.
* Implement safety awareness programs.

August 1994 – January 1998
Electrical Maintenance
DJ Roque Construction Co., Inc.
General Construction
Limay, Lamao Bataan, Philippines

Duties and Responsibilities

* Installation of electrical wiring in newly build houses and street light
* Repairing the damage electrical wiring.
* Changing bulb and fluorescent lamp in the subdivision street.

March 1992 – June 1994
Helper Electrician
VL Construction Realty
Poblacion Balanga City, Bataan, Philippines

Duties and Responsibilities

* Assisting my head electrical technician in installing and repairing electrical wirings
* Conducting everyday inventory of all the materials that we used in that particular day

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 4805)

Go to Search Parameters...

Brief Description

Mechanical Designer/Drafter with 5 years’ experience in design and mechanical drafting, over 5000 hours using Pro/E Wildfire, Auto Cad and Master Cam programs. 20 years experience in all techniques of welding. A.A.S. Drafting Cad/Cam Design, Certificate in drafting, welding,computer programming

Seeking a challenging career in the related field with a good commotion skill in Architectural Designing development and space planning development

I have master degree in architectural engennering, good experiences in construction and architecture designe, I have realized industeriel and reidentiel projects and I have good computer background

Very dedicated, Hardworking, energetic, creative Tunnelling Operator/Engineer have 11 years experienced in Micro Tunneling. Presently working in Kuwait and willing to relocate anywhere in the world.

Confident with Auto CAD 2000-2008

Diploma In Construction Eng. Working as a Team Leader for Aluminium Fabrication Contractor in Dubai. Capable of Handling Challenges. Looking for Carrying myself Ahead from Team Leader to Design Cordinator or Assistant Design Head.

i am precast civil engineer 3 year exp. in dubai

Please accept my resume as an introduction to the skills and abilities I can offer you. My entire career has been dedicated to supporting internal and external customers. My core goal is to create a positive impact with the organizations I have been affiliated with.

Bachelor of Engineering Grade : Grade A/1st Class Field of Study : Production Engineering Aggregate: 66.30% Institute / University : Anna university, Government College Of Technology, Located In : Coimbatore, Tamil nadu, India. Graduation : April 2005

I have eleven years of experience in Construction, Oil & Gas industries and in other fields too. Good knowledge in Logistical support, Materials Management, Supply Base Operations, Onshore Coordination and in other logistics aspects too.

i'm chemical engineer working presently with TOYO ENGG. INDIA LTD. attached pls. find my resume.

Superintendent Supervisor Manager

Education : Diploma in Mechanical Engineering.I am having 19 years experience (11 years in Gulf + 8 years in India) in the field of piping works in Oil & Gas, Refinery, crude oil gathering station, Gas recovery flash gas compressor, Heavy industry, Gas utilization.

I'm graduated from Uitm Shah Alam and now looking for a job in quantity surveyor. i have 1 year experience and very active club at Uitm. i also can go for outstation workand very like to meet all people.

Civil Engineer (N.E.D University)

4 years hand on working in Pipe Manufacturing Plant Offshore and Water Injection Pump related to a medium and large engineering and construction project with client and engineering contractors. Extensive experience in Civil Work, Quality Control Inspection and operating computerized Document Control

i m land surveyor having 7 years experience in kuwait.

I/E Designer, 28 years experience in the petrochemical industry along the Gulf Coast and in the oil industry in Alaska. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office. Experienced in working with other disciplines, clients, vendors & construction. Will travel

Planner & Contract engineer

Power sector professional with over 20 years of experience in O&M of thermal power plants

Site safety inspection • Driving • Basic Investigation • Knowledge in Basic programming such as C++ and Visual basic and manipulating software in designing such as adobe photoshop and macromedia flash • Basic knowledge in PC troubleshooting • Can communicate with all types of people • Mange to wor

Safety Officer with more than 5 years of experince in oil and gas and constructions

Hardworking, punctual with ability to work under pressure; Well discipline in following orders; Computer literate

Bachlore of civil engineering, diploma of civil ( concrete building )

20+years of open pit mining and process experience in lime, cement, aggregate and industrial minerals. Registered Professional Engineer, former Director of Operations for a $220,000,000 industrial minerals division. Trained in ISO, Lean, Total Quality Management and other methodologies.

HSE

Drafter

Electrical foreman, superintendent, master electrician. Very familiar with NEC

I am interested in the cad draughtsman position advertised on internet. My resume is enclosed for your review. Given my related experience and excellent capabilities I would appreciate your consideration for this job opening. My skills are an ideal match for this position.

I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.

During 19 years, I have gained some practical field experiences & knowledge as a construction civil engineer/ manager which includes, projects construction supervision, project management, quality control, coordination & liaison in the project team, field survey

I am seeking employment on construction/shutdown projects as a QA/QC inspector or planner.

Mechanical Cement & Power plant Projects Installation, Commissioning & Maintenance

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Senior Construction/ Field Engineer/Superintendent with HND Mechanical Engineering and a member of the institute of incorporated engineers. I have 15 years of experience in Construction management in various roles and locations around the world, working for major EPC contractors.

5 Yrs plus experience in overseas construction project in Singapore

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

Industrial Journeyman Electrician-28 years

Experienced Senior Civil/Structural Designer with mostly Petro-Chem background

I have well experiance in building construction work with sound technical skills.

i have one year experience iin leading post tensioning company . I have completed B.E civil Anna university Chennai. I have skill set in AUTOCAD, STAAD.Pro,ADT ,MS Project

Offering Extensive Experience in Industrial Electrical/Instrument Equipment

Senior Welding Inspector

Well experienced Financial Director with CA(SA) and Masters Degree in Accounting. Vast African and International experience. Was in charge of 18 African operations in 10 countries. Gets the job done within deadlines. Very accurate and technically astute.

Steward, Strong Organized Working Foreman, CNC Operator / Programmer, Fitter/Welder, Iron Worker, Millwright, Shop Machinery Operator, Material Handler / Inventory Auditor, Maintenance / Repair Technician, Entry Level CAD Draftsman Computer Tech, Network Administrator

Looking after Maintenance and repairs of Heavy Earth Moving Equipment, Construction Equipment and Commercial Vehicles

Mechanical Engineer,Planning in primavera for projects , Designing in solidworks,Pro/E , Analysis in ANSYS

Exp.Mechanical & construction manager in Oil & gas , more that 26 years of work with big oil companies.High educated with MSc in Mechanical and offshore engineering from Robert gordon Uni /Uk.

A capable, enthusiastic computer engineering major with on-site experience as Assistant Material Coordinator at IANUA S.P.A Engineering and Contracting Company for Glass Production.

3 years diploma in mechanical engineering

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out