Resume - instrument supervisor 5 year experiance

Misco Jobs

Resume #84252

CONTACT INFORMATION:
View contact information...

Experience: Total 5 years

Summary:

In fields of Instrumentation Supervisor of Field instrument Erection & commissioning,
System installation, plant commissioning and start-up,
Good knowledge in studying Piping and Instrumentation Diagrams.
Career Summary:

Professional Experience:

FEB-2008 to till date: Larsen tubro Electromech LLC
Construction supervisor

Project: PDO contract C31/0605
(Engineering maintenance contract)
Electrical& instrumentation works

Client: petroleum Development of Oman

Responsibility:

„« Erection. testing and commissioning co ordination of DCS system vendor
„« DCS panels,FTAcards,FTA cable installation and internal panel wiring
„« All type of field cable, system cable laying, termination and loop checking
„« As per drawing all field instrument installation
„« Preparation of hook up drawing and loop wiring drawing
„« Hand over of all test pack and as build drawing.
„« To review and carry out the construction activities of designated projects and also carrying out the maintenance of existing gas and oil facilities.
„« To Plan work with all safety measures and regulations in accordance with PDO standards.

Jan-2007 to Dec2007: Al Hassan Engineering Co.S.A.O.G. Muscat

Instrumentation supervisor

Client: Alstom POWER TURBO
SOHAR Aluminum Power Project (SAPP) 1000 mw at Sohar

Responsibility:

„« Installation, Inspection of Instrumentation on 4x174MW
„« ALSTOM make GT-13 E2 Gas turbines,
„« Inspection of Gas turbine control, power control and power cable
„« Terminations in DC, LV, Excitation and Marshalling Panels as per Drawings.
„« Erection of Electrical Modules.
„« Erection of Generator circuit breakers.
„« Installation of cable trays.
„« Laying of MV, LV, I&C and control cables.
„« Checking of Gas turbine Piping and Instrumentation Diagrams

Responsibility:

„« Installation, Inspection of Instrumentation on 4x174MW
„« ALSTOM make GT-13 E2 Gas turbines,
„« Inspection of Gas turbine control, power control and power cable
„« Terminations in DC, LV, Excitation and Marshalling Panels as per Drawings.
„« Erection of Electrical Modules.
„« Erection of Generator circuit breakers.
„« Installation of cable trays.
„« Laying of MV, LV, I&C and control cables.
„« Checking of Gas turbine Piping and Instrumentation Diagrams

220kV - SUBSTATION ACTIVITIES WITH HYUNDAI ATTENDED

Activities involved:

„« LV Panel Erection
„« Bus Bar protection panel Erection
„« LCC panel Erection
„« ALSPA 320 DCS panel Erection and termination.
„« Termination and Glanding work in all Hyundai make panel
„« Cable laying in Power,I&C and control cables
„« Loop checking and commissioning Activities

Since May 2005 to December 2006: Worked for M/s Petron Instrumentation Contract at
Chennai as Instrumentation technician
CLIENT: Tamilnadu Petro Chemical Limited

Work nature:

„« Calibration of Pressure, Level and Temperature gauges.
„« Calibration of filed instruments like Switches for pressure, Level Temperature.
„« Wiring and termination of cables. Like Signal, Alarm, Temp, control Etc.,
„« Calibration of filed Transmitters for pressure, Flow, Level, Temperature.
„« Exposure to Distributed control system (DCS) and Programmable Logic Controller (PLC).
„« Interested in Trouble shooting of Interlock in Compressor, turbine, individual burner, Gas and Oil fired boiler, Sylo Levels fir sulpher Pellatizer & process Interlocks.

Types of Instruments Handle:

„« Transmitters: Rosemount, Yokogawa, Honeywell.
„« Level Trols: Fisher, Masonelian, chemtrol.
„« Control Valves: Valtex, fisher, IL, MIL, Flow serve.
„« Shut off Valves: Virgo, Tyco Valves.
„« I/P Converters: Rosemount, Watson smith & Shryas.
„« Positioners: Valtek, Fisher, IL, MIL.
„« Switches: Indfos, Switzer.
„« Solenoid valves: Asco, Rotex Automation.
„« Gauges: An Instrument, General Instrument, HGure, Odin.
„« Thermocouples: Pyro Electric and General Instrument.
„« Barrier: P & F, MTL & all KFD2 Models.
„« Flame scanner: Durag, IRIS (Model: p522)

Educational Qualification

DECE - Diploma in Electronics and Communication Engineering (3 years) from State Board of Technical Education and Training. Government of Tamilnadu [First class with Honours of 79 % marks] in the year of April 2005.
H.S.C. (March 2002) - from G.H.S. School, Kattathurai (State board) with 72 % marks.
S.S.L.C (March 2000) - from G.H.S. School, Kattathurai (State board) with 62 % marks.

Computer Exposure

Diploma in computer application (DCA)

Diploma in AUTO CAD
Operating System - Windows 98, 2000 & XP
Programming in C
HTML & FOXPRO

Personal Details
Date of birth: 18 - 03 - 1985
Marital status: Single
Languages known: English, Tamil, Malayalam, Hindi
Sex: Male
Nationality: Indian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3251 to 3300 of 4814)

Go to Search Parameters...

Brief Description

Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.

Engineer have Bsc. in civil eng. & higher diploma in water polllution control eng. with experience of more than 5 years in Building & environemtal works

Sales, Marketing,Business development,Automobiles, Spare Parts, Lubricants, ,Pipes, Construction Machinery,Trucks Concret Pumps, Tyres etc.

10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares

Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

Experienced involved problem solver with more than nineteen years of progressive experience, offering significant expertise in project management, manufacturing and oil and gas accounting management, and focused on management operations and am able to continue to learn new processes and apply them.

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

MEP project manager,project management,design co ordination & implementation,execution,commisioning and handing over with proper documentation,core electrical engineer,high rise buildings

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

Construction Management/Estimating/Supt/PM

Experience in pipeline, Power Plat Installation

Technical Writing with 15 Years of Experience in the UAE

I want to find work Overseas in the Tower Construction Field.

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Seeking Managerial or Supervisory position in Logistics & Transportation.

instrument supervisor 5 year experiance

Chief Enineer, Limited, Oceans, Unlimited HP

Jamiu Badmos is a Registered Engineer cum HSE Professional with over 9yrs experience in QHSE & Project Management

23 Years of Various field of accounting

Director

Electrical field

Professional with 4 ½ years experience in Oil Industry construction projects as contracts administrator and a cost controller.

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

A Degree in Business Admin and Management, skills and experience in secretariat and Administrative duties, have worked in an Oil and Gas company, 2 Construction Companies, good mastery of Micro Soft applications, excellent in both spoken and written English, with French and an additional Language.

CSWIP 3.2,BGas Grade 2,ASNT Level 3 in RT,MT Level 2 in RT,PT,MT,UT

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Bridge, Highways/Roads engineer: A devoted qualified Civil Engineer seeking a challenging career opportunity in Bridges/Roads construction management projects in the Middle East/Africa regions

Construction Manager for large scale projects

MSc Engineering / Business Development / Project Management /Energy fielsd

Control Systems Engineer (Programmer & Designer)

Project Manager / Finance Management

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

10 Plus years Developing and maintaining EPC Schedules Utilizing Primavera Softwares

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

20 years - Electrical Trade Background, 4 years - Reliability planning-scheduling Oil & Gas

Installation, Maintenance, and Repair, Multi Site Cosmetic/Maintenance, Equipment Operators

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Tendering & Estimation, Proposals Preparation, Contracts Engineer

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 [ 66 ] 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out