Resume - I am a Civil/Structural Engineer who has recently been laid off from Fluor Danie...

Misco Jobs

Resume #84263

CONTACT INFORMATION:
View contact information...

EDUCATION
Texas Tech University, Lubbock, TX Fall 2002 – Fall 2006
Bachelor of Science in Civil Engineering
EIT Certified
Member of the American Society of Civil Engineers (ASCE)

JOB SKILLS: Microsoft Office, SmartPlant, RISA 3D and Foundation software; DesconBrace, DesconWin, PCA, Baseplate, Momcon, Horizontal Vessel, PVAP, SVAP, MathCAD, HCSS, Timberline

WORK EXPERIENCE
Fluor Corporation, Sugar Land, TX January 2007–June 2009 Associate Design Engineer II
British Petroleum Whiting Project-
* Worked on British Petroleum Whiting Project, a downstream project originally worth $3 Billion that became worth $5 Billion.
* British Petroleum Whiting Project involved the revamp and new construction of the Whiting Refinery, one of the United State's oldest refineries.
* Worked on the PS12 section, PS12 is a single section of Whiting Refinery with new Vacuum Structure and Tower, new Fractionator Structure, new Heaters and their Piperacks and Equipment.
* Worked as a new-graduate/EIT level Civil/Structural/Architectural engineer alongside licensed Structural PEs registered to practice in Texas, Illinois, and Indiana.
* Worked in conjunction with British Petroleum Clients and Fluor Pipeline, Electrical, Mechanical, Process, Project Controls, and Estimating departments on project.
* Did all Structural Engineering and Design in compliance with AISC 13th edition Steel Construction Manual, ASCE 7-05 Minimum Design Loads for Buildings and Other Structures Manual, ACI 318-05 Building Codes, ASCE Blast Design in Petrochemical Facilities guide, Fluor Process Industry Practices and British Petroleum Project Specifications.
* Engineered and Designed Mat Foundations using RISA and PCA Column software.
* Engineered and Designed Pump Foundations using RISA, PVAP, and SVAP software.
* Engineered and Designed Electrical Manholes using RISA software.
* Engineered and Designed Concrete Heat Exchanger Piers using PCA Column and RISA software.
* Engineered and Designed Concrete Horizontal Vessel Piers using PCA Column and RISAsoftware
* Engineered and Designed Steel Fractionator Structure using RISA, DesconWin, DesconBrace, Baseplate for Windows and MomCon software.
* Engineered and Designed Steel Piperacks using RISA, DesconWin, DesconBrace, Baseplate for Windows, Foundation for Windows and MomCon software.
* Engineered and Designed Steel Equipment Platforms using RISA, DesconWin, DesconBrace, Baseplate for Windows and MomCon software.
* Engineered and Designed Steel MPS using RISA, DesconWin, DesconBrace, Baseplate for Windows, Foundation for Windows, and MomCon software.
* Designed Pile Cap foundations with Auger Cast In Place Piles via Hand Calculations.
* Designed Spread Footing foundations via Hand Calculations.
* Designed Blast Resistant Buildings via Hand Calculations.
* Participated on-site verifying measurements of existing equipment to be revamped at Refinery.
* Participated on-site inspecting of existing equipment.
* Participated on-site verifying locations of new piperacks and equipment to be installed.
* Managed distribution of Pipe Stress Isometric drawings showing Pipelines with their loads.
Texas Tech University-
* Recruited students from Texas Tech to work for Fluor.
* Went to Semester Job Fairs in 2008.
* Went to ASCE chapter meetings as Fluor's Civil/Structural department liaison.
Kennedy Porter Associates, Baltimore, MD Summer 2006
Engineering Technician
* Worked in conjunction with Maryland State Highway Administration (SHA).
* Did Structural Analysis of Vehicles in excess of 120,000 lbs. across SHA-Owned Bridges.
* Escorted Vehicles in Excess of 200,000 lbs. across SHA-Owned Bridges.
* Learned about Bridge Design based on H-20, HS-20, HS-25, and T-3 Trucks.
* Learned about Structural Members for small scale structures such as Bridges and Boardwalks.
* Did reconnaissance work photographing pedestrian bridges to be repaired in various state parks.
* Designed spread footing foundations for small scale structures manually.

CFS Engineers, Columbia, MD Summer/Winter 2005
Engineering Intern
* Participated in the Land Development of Preserves of Piscataway, a residential subdivision in Prince Georges' County, Maryland.
* Manually plotted road cross sections for planning cut and fill purposes.
* Manually calculated storm water management pond volumes.
* Manually drafted and calculated floodplain areas.
* Drafted storm water sewer profiles on AutoCAD.
* Drafted Elevation Checks for Sewer Design purposes on AutoCAD.
* Participated on surveying crew during field assignments.

Bradshaw Construction Corporation, Ellicott City, MD Summer 2004
Engineering Intern
* Participated in various tunneling construction projects in the states of Maryland, Pennsylvania, South Carolina, and Georgia.
* Manually plotted soil logs for tunneling purposes.
* Learned how to bid projects using HCSS Heavyjob and Heavybid software.
* Made emergency part deliveries to various construction sites often going across several states.
* Participated in the legal side of bidding projects verifying legal requirements for local, state, and federal regulations, scheduling, and participation of MBE/DBE subcontractors in projects.
* Worked on construction crews drilling a wastewater storage facility.
* Worked on construction crews assembling tunnels through pipe jacking method.
* Worked on construction crews surveying sewer line to be installed via microtunneling method.

PROFESSIONAL REFERENCES
Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2601 to 2650 of 4806)

Go to Search Parameters...

Brief Description

Over thirty years of combined engineering and construction management experience involving supervision, design, contracting and construction, pre-award and post-award contract administration, change order and claim management, CPM Pert scheduling, cost, estimating, procurement and logistics of large

Multilingual GIS (Geogpaphic Informational Systems) professional, cartographer

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Welding Engineering

M.Tech Transportation Engineer with 2+ years of experience

Safety Professional, 30 years experience construction, minin, environmental and hazmat

Master in Machine Design engg with 6+ Yrs of Exp in design,Developement & Reverse engg of machine elements and Design Support for Onsite clients.

Caterpillar Dealership, Surface and Undergound Mining Experience.

I am an Indian Mechanical Graduate Engineer with more than six years Multi-dimensional Experience in oil & gas related projects in India & abroad.

I am a highly motivated person who is incredibly conscientious and hard working with an incredible ability to get the job done in adverse conditions and time restraints. The majority of my experience has been working on all types of heavy earthmoving equipment in a vastly changing mining environment

4 year Bachelor of Engineering Graduate Instrumentation Enginee,Automation Software Development for Three level Control System and Modeling the process for the purpose of control system design.

12 years of experience in the contracts and project management in Oil & Gas EPC Projects, including 7 years working in Dubai. MBA ( Finance) graduate from Texas A&M International University and Engineering undegraduate from Cochin University in 1995.

Over three years of experience as an Electrical Engineer with a broad understanding of operations and practices for petrochemical, commercial, and industrial projects, all involving engineering and design of electrical systems. Knowledgeable in AutoCAD and Microstation.

I mastered AutoCAD and installation of pipes for the fire and the fire system. And I was able to work under pressure of time.

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

Spie-capac-Petrofac international limited JV (AGT Azerbaijan Georgia Turkey) oil and gas pipeline project (Tbilisi, Georgia). Position: HSE Trainer

fire and safety engeeneering and fire fighting courses from god

Truck Driver / Construction Superintendent /Customer serves/Quality /Safety Inspector

Structural Designer / Draftsman

I have over 10 years experience in the field of Safety in both the construction and process industries. I have substantial hands on experience working in maintenance, plant shutdowns, and fabrication & installation of Mechanical, Piping and Structural steel work.

I am a Civil/Structural Engineer who has recently been laid off from Fluor Daniel and is seeking new employment. I have with overtime considered at each job, four years of diverse experience as a Structural Engineer

I am M.Tech Welding Engineering graduate with one year of experience in manufacturing industry.Myself specialized with WPS,PQR preparation and i am having ASNT level II certifcate in Ultrasonic Testing.

qa/qc instrument engineer with 4 years exp

QA/QC Welding Inspector & plant inspector

Civil Project Engineer (PMP®) with over 4 years experience in large domain projects.

More than 10 years experience in shipping and logistics as a Project Coordinator and customer services for both local and international 3PL, Shipping & Marine Companies.

3+yrs exp in qa/qc in highway engineering (roadworks)

HYDRAULIC MECHANIC

Quality Assurance/Quality Control COORDINATOR for Oil & Gas Projects (Pipelines, Tanks, In-Plant Piping, Pumps & Compressors Installation)

Seeking full time employment with a construction company who is need of a Loader Operator. Doesn't matter where I'm willing to move.

Looking for a plumbing position overseas

I am ambitious, hard working, challenge orientated and enjoy problem solving. I am able to work within a group or by myself.

Working as a Project Engineer since 1992.

Environmental Specialist and Project Manager, with over 18 years of experience in the Infrastructure developkent projects.

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Global Sourcing, Program Management & operations management specialist with over 16 years of experience with ITES Consulting (4 years plus) & manufacturing industries (12 years. Contributed to improve profitability of various business organizations through “Spend Management” & “Supplier Relationship

Skills And Qualifications

CAD Manager for Microstation and AutoCAD

Seeking Middle Level Managerial assignments in Business Development / Channel Management / Sales & Marketing with a FMCG, Automobile, Beverages oriented organization PROFESSIONAL SYNOPSIS A dynamic professional with over 4 years of rich experience in Sales & Marketing, Business Development, Chann

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Corrosion Control; AutoCAD drafting; Estimating; Material order; Microsoft Office; Mechanic and Architecture drafting;

10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO

10 years experience in EPC company. Good interpersonal and communication skills, experienced as a Lead Process Engineer, HAZOP member and Field Engineer, advanced ability in value engineering, P&ID, PFD, process simulation, feasibility/conseptual study and other detail engineering

Very experienced in systems / instrument commissioning / maintenance

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Electrician and Electronics Technician, with military and civilian experience

First Prev 51 52 [ 53 ] 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out