Resume - From April 2008 to May 31: EMPLOYER: Astaldi Arabia Ltd, Qatar SIGNATION: ...

Misco Jobs

Resume #84805

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES

To Build Career in the Field Of Quality Control and Quality Inspection At Major Companies by Utilizing My Technical and Communication Skills, Relevant Industrial Training And Extensive Computer Knowledge.

ACADEMICS

UNDERGONE BACHELOR OF ENGINEERING IN MECHANICAL FROM C.S.I. COLLEGE OF ENGINEERING (ANNA UNIVERSITY).

PROFESSIONAL QUALIFICATIONS

* ASNT NDT LEVEL II IN FOLLOWING METHODS.

ULTRASONIC TESTING (UT).
RADIOGRAPHIC TESTING (RT).
LIQUID PENETRANT TESTING (LPT).
MAGNETIC PARTICLE TESTING (MPT).

* (WAITING FOR RESULT: CSWIP 3.1)

PROFILE

Wide Exposure in Quality Control and Welding Inspection and NDT Related in Engineering Field.
Strong Knowledge of International construction codes, Standards, Intrex Standards and procedures.

PROFESSIONAL WORK HISTORY

1. From April 2008 to May 31:

EMPLOYER: Astaldi Arabia Ltd, Qatar

DESIGNATION: Quality Control Engineer.

PROJECT: Qatofin LLDPE Project, Qatar

DUTIES & RESPONSIBILITY

* To study the isometric drawing received from the clients and to identify the pipe lines and carry out the inspection work
* To Carry out Line punching during the Test pack internal review and assistance for the reports preparation.
* Preparation of internal punch list and clearance inspection during fabrication
* Witness of Hydro tests and Pneumatic tests of Piping
* Co-ordination with civil/construction departments for testing/backfilling activities
* To carry out reinstatement of piping and report preparation.
* To check and prepare orifice flange inspection and pipe flange alignment report.
* To study the P&ID and other circuit diagrams in the test pack.
* Co-ordination with painting department for performing wrapping/coating, holiday test, and maintaining QC reports.
* Monitoring the calibration of test instruments and equipments.
* Assistance for the document control
* Review and Interpretation of RT films as per ASME B 31.3, V.
* Carry out Penetrant Testing and report preparation
* Preparation of RT selection list for the Daily Radiography works
* Inspection and testing activities as per the inspection procedure
* To check the fit up stage prior and confirm that root gap, Off set, bevel angle are with in acceptable limit
* To witness preheating process and verify the chart
* To witness magnetic particle testing of fillet joints and check the surface & sub surface defect
* To do the penetrant testing as per the approval procedure is acceptable limit or not
* Piping as per the standard and specification
* Co- ordinates the different type of welding works
* Preparation of weld map and maintaining the weld record
* To select the joint for the NDT as per the welder coverage and line class percentage
* Maintaining of all inspection report and related documents in QA/QC department
* Co-coordinating with main contractor, third party and client
* Control calibrated measuring and test equipment used on the project
* Preparation of punch list and clearance to next stage like Erection and painting
* Preparation of test pack and submit to the higher authorities
* Co- ordinate with sub contractor for NDT activities like radiographic testing, magnet particle testing, Ultrasonic testing and penetrant testing
* Conduct all worker activities in the safe and environmental polices and procedure
* Co-ordinating for the inspection of structure such as bolt tightening, alignment, shim elevation etc

2. June 2007- March 2008

EMPLOYER: WENS Quality Assurance Pvt. Ltd
DESIGNATION: Inspection Engineer/ Welding inspector

DUTIES & RESPONSIBILITY

* Verification Fit up spool dimension Orientation, joint preparation according to the
Isometric drawing.

* Ensure proper preheating and monitor welding Parameter during welding.

* Carry out visual inspection of root run, cap and ensure inter –pass temperature as per approved WPS.

* Witness PMI performed on austenitic SS material.

* Witness destructive tests carries out on weld Metal and parent metal according to project
Specification.
* Review of PWHT chart and witnessing Hardness Survey.
* Preparation of all NDT reports
* Coordination of all NDT works
* Submission of reports to the clients
* Interpretation during Magnetic Particle Testing
* Interpretation during Dye Penetrant Testing
* Witness of Hydro Test
* Inspection of Fit up, DP test of root welds and weld visual
* Calibration and interpretation during Ultrasonic Testing
* Interpretation of RT films as per ASME B 31.3, V.
* To study the drawings received from the clients for Execution at site and clarify the ambiguities
SHUTDOWN PROJECTS

PROJECT I:
Client: SABIC (Ibn Zahr)
Post: Inspection Engineer
Project: Shutdown
Site: Saudi European Petrochemical Co
Duration: November 15th to 30th

PROJECT II:
Client: Saudi Aramco lubricating Oil Refinery (luberef)
Post: Inspection Engineer
Project: Shutdown
Duration: December 1st to 15th

PROJECT III:
Client: Saudi Consolidated Electricity Company
Post: Inspection Engineer
Project: Shutdown
Duration: December 20th to January 4th

PROJECT IV:
Company: J.K.Inspection Services
Post: NDT Coordinator
Site: Kakrapar Atomic Power Station, Gujarat (Shutdown)
Duration: July 15th to August 30th

PROJECT V:
Company: WENS Quality Assurance Pvt.Ltd
Post: Inspection Engineer
Site: North Chennai Thermal Power Station, Chennai (Shutdown)
Duration: September 23rd to October 13th

SITES WORKED:
* Saudi Aramco lubricating Oil Refinery (luberef)
* Saudi Consolidated Electricity Company
* Saudi European Petrochemical Co (SABIC)
* Qatar Petrochemical Company (QAPCO)
* Qatar Vinyl Company (QVC)
* Kakrapar Atomic Power Station
* Tamilnadu Petroproducts Ltd, Chennai
* Essar Constructions Ltd, Chennai
* Ennore Thermal Power Station, Chennai
* North Chennai Thermal Power Station, Chennai
* Asian peroxide Ltd, Sullurpett

DUTIES & RESPONSIBILITY

 To Carryout NDT Methods such as UT, MT, PT, RT, VT for Static Equipment such as Exchangers, Reactors, Heaters, Vessels and Storage Tank.
 Witness Hydro Test.
 Third Party Inspection of Different Manufacturers.
 Interpretation of Radiographs.
 Witness of Hardness testing.
 Thickness Gauging.
 Reviewing Test results and reporting same to the senior inspector or supervisor.
 To Carry out testing and evaluate the test results preparation of final documents to the projects owner's inspection plans. Well conversant in piping isometrics drawings & Engineering Drawings.

CODES STANDARD & SPECIFICATION

Well Conversant with ASME, ANSI, AWS, ASTM, API Codes & Guidelines.
Familiar with following Codes, Standards & Specifications:
* ASME - SEC-V
* ASME - SEC- VIII (DIV. 1 & 2)
* ASME - SEC- IX
* AWS - D1.1
* ASME - B 31.3

PERSONAL DETAILS
DATE OF BIRTH: 17th May 1985
LANGUAGE PROFICIENCY: English, Malayalam, Tamil, Hindi
NATIONALITY: Indian
RELIGION: Islam
MARITAL STATUS: Single

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2851 to 2900 of 4798)

Go to Search Parameters...

Brief Description

Painting, Insulation & Fireproofing

12 years experience in designing of electrical system for medium to large projects in EPC consulting firm;Designing and drafting construction drawings for substations, distribution, electrical control, FAS, and etc.

OIL AND GAS (BOTH UPSTREAM & DOWNSTREAM), PETROCHEMICALS, POWER (NUCLEAR & CCGT) Pharmaceutical, STP

Electrical Engineering Graduate, 8 years of experience in the execution of High Voltage Substation & Airport projects

i was in dubai for past 25 years and i moved to australia with my family on peramanent resident visa last year july.

I am Chartered Accountant and working with Al Khafji Joint Operations (Saudi Aramco Gulf Operations and Kuwait Gulf Oil Company) as Financial Analyst

onsite measurements of any kind of machininery

Heavy Equipment operator/ Supervisor ready for a new challange

Qualified as an approved electrician and later occupied positions as Electrical Superintendent, Electrical Supervisor, Senior Quality Control Engineer, Senior Electrical Inspector, Construction Specialist and Site Manager on Commercial, Light & Heavy Industrial, Petrochemical, British Gas Systems

having 5 years expreience in construcion safety, managing toll operation, and also having one year experience with indian army.

From April 2008 to May 31: EMPLOYER: Astaldi Arabia Ltd, Qatar SIGNATION: Quality Control Engineer. PROJECT: Qatofin LLDPE Project, Qatar DUTIES & RESPONSIBILITY • To study the isometric drawing received from the clients and to identif

Free! I have 16 years post qualification experience as a Project Engineer, project Controls engineer, Cost Engineer, Planning and Scheduling engineer. I have worked both on opeerator's team and contractor side. My experience spanned through deepwater projects in oil and gas industry, EPC projects etc

I am a Mechanical Engineer graduated from the University of Bangalore who passed out during September 2000. I got more than six years of professional post qualification experience in the Mechanical Engineering field. As a young budding Engineer, I am very much eager to join your Esteemed Organizatio

CONTACT DETAILS PERSONAL DETAILS UNIVERSITY SCHOOL WORK EXPERIENCE CURRENT EMPLOYMENT KNOWELEDGES,INTERESTS

TO BE ABLE TO ATTAIN A NICE ACHIEVEMENT IN MY LIFE .THATS IT....

I have experience as structural engineer in analyzing offshore platforms . I have a well knowledge on OHSAS 18001 and API RP 2A International codes.

want to provide excellent customer services to clients by being creative and proactive in providing reasonable and dependable solutions that keep projects on track and in conformance.

Project Planning, Estimation, Contracts, Execution and Management, Familiar with High rise Buildings.

An Electrical Engineer with two years experience in the field. Graduated from the American University of Beirut willing to be relocated for the sake of pursuing a career in Electrical Engineering.

HVAC ENGINEER WITH 2YRS EXPERIENCE IN HANDLING PROJECTS

HSE Manager On An Oil And Gas Construction Project With Over 1000 Employees; Construction Safety Officer Designate; Occupational Health, Safety And Environmental Leadership Diploma Near Completion

ƒæMechanical Design & detailing of Pressure Vessels, Columns, Heat Exchangers as per codes.ƒæDesign calculations by software (Codeware Compress,PV Elite) as well as manually

2G/3G-Project Engineer, Civil works implementation engineer, Project Manager, QA/QC Engineer

Five years of work experience in complementing functional areas such as Design, Manufacturing, Customer Engineering and R&D at large and mid-size corporations in USA and in India providing unique flexibility and cross functional skills

I currently hold over 18 years of government contracting experience including purchasing commodities, service contracts, repair, maintenance agreements and construction contracts via oral solicitation, request for bid (overseas), sealed bidding, and negotiated agreements.

Obtain a position utilizing my degree, knowledge and skills where applicable, especially in a support role in the areas of Information Technology and Systems

Mechanical and Production Engineer with 20 years of mechanical design, project engineering and management experience in England, Chile, Argentina, Peru, Cuba, Canada, USA and Australia, fully bilingual in English and Spanish.

Offshore Production Operations & Offshore Construction Operations

Well versed in contracts formation and administration, project management, claims mitigation and resolution, contract negotiation, subcontractor mangement, quality assurance on major projects thoughout the world. Results-oriented, with an ability to see any assignment to successful completion.

Mechanical maintenance equipment of all types

Degrees in Electronics and Instrumentation.Highly detail oriented, and organized. Good planner, a self-starter with ability to meet deadlines, and personable. International experience in & gas and other industries.

Senior Planning Engineer, > 15 years experience in upstream oil&gas projects, construction.

In quest of a challenging job where I can utilize my full potential & strength and can take my own initiatives for the betterment of the company. Where I can also grow with growth of the company in a highly professional work environment

Italian citizen, born in 11th may, 1979; Building engineer with 1year of experience in engineering and 5years of experience in architecure and design.

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

Construction Manager/ Plant Maintenace Manager

Certified Welding Inspector

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

ENVIRONMENTAL HEALTH & SAFETY COORDINATOR : 5 years on sites (petrochemicals, chemicals, car industry, nuclear, steel, water industry)

Experience of about seven to eight years of Managerial post and having responsibilities of monitoring of project in all aspects.

As apparent in my resume I have close to 2 years of work experience. The most predominant project I was assigned too was at Motorola. I was working on a New York state-wide two-way radio communication network for emergency personnel.

Purchasing Agent / Buyer

Qualified and Certified NCCCO Operator with all endorsements willing to travel

Piping Engineer (Construction) Diploma in Mechanical Engineering Forteen years experience

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

PLC, SCADA, DCS, P&IDiagrams,Project Schedulling,Estimation,MS office

Project Manager/Manufacturing Manager/Site Safety

Senior Project Manager, Quality Manager, International experience

I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.

Experience in QA/QC documentation procedures and processes in a petro-chemical plant construction set-up covering various disciplines i.e. civil, structural, mechanical, electrical and instrumentation. Monitor and ensure that all required documentations are followed as per approved project quality

First Prev 51 52 53 54 55 56 57 [ 58 ] 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out