Resume - Commissioned 500/220/132/11/0.42kV substations and 220MW,175MW combined cycle po...

Misco Jobs

Resume #85137

CONTACT INFORMATION:
View contact information...

Electrical Engineer(commissioning)

OBJECTIVE
To work in a dynamic and progressive environment where I can share my education and knowledge and enhance my skills, which will provide me an opportunity for growth and development in the vast field of Electrical Engineering.

WORK EXPERIENCE
1) Al-Saleh LLC Muscat (Oman)
Designation: R&D Engineer
2) Siemens Pakistan Limited, Karachi Currently Employed since 2008
Designation: Commissioning Engineer
Job Description:
Technical Expertise:
* Projects Executed
Testing and Commissioning of 500/220/132 kV Ghakkhar
Testing and Commissioning of 220 kV Honda Atlas Grid Station
Testing and Commissioning of 220 kV Doosan Grid Station.
I have got hands on experience on the following:
* Testing of control and protection schemes for Line, Transformer and Coupler bays.
* Testing of Circuit Breaker and Isolators operations and Interlocking checks.
* Testing of Breaker failure protection.
* CT Secondary and Primary Injection.
* CT Ratio, Polarity and Saturation Test, Trip logics.
* Trafo Stability Test, Trafo Differential Test.
* Bus bar Stability Test, Bus bar Differential Test.
* Synchronizing scheme Check, Restricted Earth Fault.
* VT ratio check, VT Circuit Check, DC Failure Alarm and Annunciations Check.
* Trip circuit supervision scheme Test.
* Worked on Bay Control Unit
* Have good knowledge of Distance protection, O/C, Earth fault protection, Breaker failure, line differential, and famillar with all the Relays related to Electrical protection

* COMMISSIONING of 11kV and 0.4kV SYSTEM
Commissioning of 11KV switch gears, 11KV switch gear interlocking, 11/0.4kV Distribution Transformer, 11kV Capacitor Banks, 400V Switchgears, 400V AC DB, 400V PFIP and various 400V motors.

* MEGGER AND HIGH VOLATGE TEST
Megering and HI-Pot testing of HT cables and bus bars
* BATTERY BANKS AND CHARGER
Commissioning of 220VDC, 110VDC and 48VDC Chargers, DC DB and Battery Bank. Load Discharge Test for Battery Bank

INTERNSHIPS:
Karachi Shipyard and Engineering Works ltd, Pakistan (June 2006)
* Reporting to the Chief Electrical Engineer about maintenance of Electric Cranes, Electromagnets and Electric Furnaces
* Responsible for report submission based on work experience in Power Generation and Maintenance Department.
* Observed operation of generating units under loaded and un-loaded conditions.
EDUCATIONAL HISTORY
Achievements Year Institution Scores
* B.E. (Electrical Engineering)
Karachi, Pakistan. Jan2004 - Dec2007 NED University of Engineering and Technology First Division

* H.S.C (Pre Engineering)
Bannu, Pakistan. 2001 - 2003 Govt. Degree college Bannu Grade A

* S.S.C (Science)
Domel, Pakistan. 1999 - 2001 Muslim Model School and College Domel Grade A

COURSES & ACCREDITATION
* Programmable logic Controller.

ACADEMIC PROJECT
"Servo Control System"(Linear Control System Based)

COMPUTER SKILLS
* Electronic Workbench MultiSim
* Matlab
* MS Windows 9x/XP * MS Office
* Adobe Photoshop

PERSONAL BIODATA
Date of birth: 29th of March, 1985.
Age: 24 yrs
Place of Birth: Domel Pakistan.
Marital Status: Single.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 4812)

Go to Search Parameters...

Brief Description

Intensive experience in heavy equipment workshop management,in service at Caterpillar agency and in client requests for repairs and implementation of warraty.Awarded "Man Of The Year in 1997 by Caterpillar Switzerland.

To obtain an entry level position in the computer drafting and design field utilizing my education and skills with an expanding and dynamic company.

Seasoned construction manager with over twenty years of progressive experience in commercial and industrial construction on both U.S. and worldwide projects in the following industries: Automotive, Semiconductor, Chemical, Cogeneration, Commercial Building, Food and Beverage, Institutional, Hospita

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

Unlimited Welding Cert-(SMAW)/ 1/2" Dual Shield wire cert/ Pattern Layout/Parallel development

BE-Mechanical Engineering;ASNT Level I &II in RT,UT,MPT &DPT;Auto Cad;Experienced in Fabrication and Erection of heavy structure , piping,vessel and Slag blasting & painting.

I am a graduate with Bachelor Degree in Mechanical Engineering from the University of Madras, India. I am having more than2 years Gulf experience in Air–Conditioning and Ventilation (HVAC), Plumbing, Drainage and Fire Fighting, Chilled water Piping Design & Installations. I also count same years o

Construction & oil and gas & auditing

Results-driven Civil Construction Management Professional with extensive senior-level experience in the Supervision, Quality management, planning & programming, design and successful completion of large-scale civil and structural engineering projects worldwide.

Free! Seeking a challenging project management position with a successful heavy civil construction firm. Preferably, Infrastructure Projects in excess of $100 Million.

I have eight (8) years of experience as Project Support Specialist with expertise in Document Management Control in the field of Engineering & Construction. Work experiences also include exposure in computer related environment such as development of customized application system program utilizing

Graduate in Mechanical Engineering , Certified Welding Inspector AWS CWI, ASNT Level II RT, UT, MT, PT, 10 years experience in welding inspection of Power boiler, pressure vessels, heat exchanger, Power and process boiler piping fabrication. Able to prepare WPS, PQR

Associate Member: (NIOB) Nigeria Institute of Building (0001397) 2005,,NY.S.C. National Youth Service Corps. 2002- 2003,Higher National Diploma:: Building Const. Technology@Fed. Poly. Nekede Owerri 2000 - 2001

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Excavator, Showell, Dozzer etc. heavy machinery operator with 15 years of experience worked in India, Iraq, Kuwait, Dubai, Saudi-Arabia and Oman.

Civil Engineer Master in Construction Administration

OBJECTIVE Find a rewarding position, which both recognizes and rewards performance. A place where someone is able to establish their skills and be capable of learning at the same time.

International Program / Project Manager. Experience of working in Senior capacity within consultant and client organizations. Europe, Middle East and Africa experience. Young, dynamic and highly qualified (BSc, BSc, MSc, MCIOB).

FIELD PIPING ENGINEER - OIL AND GAS ONSHORE / OFFSHORE LEAD PIPING DESIGNER, CHECKER

OSHA 510, OSHA 500, hazwoper course/several years experience in industrial and plant work.

Experienced Materials Procurement Management Manager and Supervisor for Marine Facilities, NGL, Pipeline and Refinery Projects. Bilingual, fluent in English and converational in Thai.

I am looking for a project amanger post according to detaied CV I can handle all phases og project

Electrical Estimation Engineer with Two years and Four months of experience

I am a structural draughtsman working for 5 years.

A highly accomplished and enterprising SENIOR PROFESSIONAL with mature expertise in engineering and construction management, project management, facilities engineering, business and project development

Planning, Monitoring, Scheduling, Costing, Budgeting and Estimation Civil works

my qulification is graduation from ranchi univercity. i done diploma in safety officer from jamshedpu.and i have more than 5 year's experience in national constration company.my english language is good and i know hindi language

Advanced air diver, subsea construction, wet welding, all aspects of construction, top notch employee.

Project Management

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing electro-mechanical projects and operations & maintenance of real estate properties.

High level of computer skills including experience in Online Document Management System like Aconex, Hardworking, flexible, highly-organized and able to meet deadlines and committed to the highest standards of quality and accuracy

A Quality Assurance Professional Professional with Over 25 years of experience in Health, Safety & Environmental, Quality assurance, Quality control system development, implementation and maintenance of project HSE & QA/QC Standards. Preparation of Project HSE and QA Plan & procedures, Job Safety Al

c,matlab,ADS, INTELLISUITE

3dsmax, photohop,illutrator, autoCAD, Google 3Dsketchup,etc

Welder Fabricator/Plumber/Carpenter/Painting/NDT.None Destractive Testing

ARCHITECTURAL TECHNICIAN

MEP Coordinator

applicantI have experience in site supervision and to manage a team of worker. I also have experience in inspection of works, topographical surveys with total station, GPS and automatic level a very good knowledge of AutoCAD and Easysurf. Now I’m working with private company as Engineering Tec

I have been working in design and construction of instrumentation and control systems for pipelines and industrial plants (oil & gas), for more than ten years. My experience includes specification, design, configuration, and programming of complex control systems with DCS, PLC, and SCADA systems.

Istrumantation, electrical construction works, autocad, people management,safety officer, electrical/electronics technician.

4-5 years of construction safety, Masters degree in environmental health and safety

Electrical, Instrumentation and Control Disciplines

Electrical Engineer ( project & design) with 15 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

Construction superintendent with over 16 years of experience.

-Master Of Business Administration (MBA -Finance) -Comprehensive Knowledge Of Accounting And Finance Concepts And Principles -Implementing And Supervision Of Cost, Budgeting, Scheduling, Cash Flow, Estimating -Work Experience More Than 9 Years In U.S. Based Companies

Construction manager /Foreman/carpentry background/Marine experiance

Qualified Accountant by Experience in IFRS/IAS, Controlling, Budgeting, Compliance, Taxation, ERP Implementation and HR

Commissioned 500/220/132/11/0.42kV substations and 220MW,175MW combined cycle power plants

A visionary and holistic manager who's widely exposed to sales and marketing, management, operations, distribution, business development, and strategic planning. An exemplary leader with all-round capabilities and have proven track records in increasing revenue, market share, and profitability.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out