Resume - iosh managing safely and osha in construction safety and health qalified hse off...

Misco Jobs

Resume #85189

CONTACT INFORMATION:
View contact information...

Post applied for: HSE OFFICER
(NOC available from the present employer)
________________________________________
SUMMARY
________________________________________
Profile: Male, 29, Married
Nationality: Indian
Highest Qualification: Graduation
Total Experience: 8.9 years
Current Location: Qatar
Current position: Hse Officer
Company: Fata EPC -Italy
(Reporting to: HSE Manager)

________________________________________WORK EXPERIENCE
________________________________________

Duration: March 2008 - Present Doha,Qatar
Position: Hse Officer
Company: FATA EPC.
Client: Qatalum
Project: Awarding of world's largest Aluminum smelter Plant ever constructed in one phase with a dedicated Power Plant, Anode Baking Plant and Cast house. Joint- Venture Project of Hydro (Norway) & Qatar Petroleum.
Roles: Overall Supervision and managing of subcontractor¡¦s.
Duties & responsibilities:
„« Hazard identification and risk assessment at site.
„« Preparing reports of all incidents, accidents and near misses.
„« Monitor consistent use of PPEs, execution of routine inspection of tools and equipment, adoption of environmental protection measure, application of job hazard analysis, etc.
„« Reporting to HSE manager

Duration: Nov 2006 - Mar 2008 Dubai, UAE
Position: Safety Supervisor
Company: Shinryo Corporation EPC - Japan

Project:
„« District Cooling Plant Project
Client: Nakheel
Company Information: Japan based Multinational EPC Main Contractor engaged in the field of Engineering & Construction of Cooling Plants, design and construction of Cooling Towers, Cooling Water Tanks, and Chillers & Pipe Lines.
Roles & Responsibility:
„« Ensure all new employees at site undergo safety orientation training prior to start work at site.
„« Ensure proper implementation of Tool Box Talks at work site.
„« Ensure all in PPEs and proper use of the same.
„« Ensure good housekeeping and proper stacking of materials.
„« Ensure safe use of lifting gears at site.
„« Inspection of construction equipments prior to start work at site.
„« Inspection of Permit to work along with attached documents at site prior to start work.
„« Keep an investigating and records maintaining system of site accidents, incidents, near misses etc.
„« Ensure proper implementation of safety policies at site.
„« Control the Road signals, Traffic and security personnel.

Duration: 2004 July- 2006 September Ahamadabad, India
Position: Safety Inspector
Company: Shreeyam Health Care
Nature of work: Carried out the duty as Safety Inspector for Hospital Electronic Devices in connection with medical handling equipments for a period of 2 years. Controlling all the vehicle movement, Visitors entry, Fire Fighting equipments maintenance and proper safety and security of the warehouse along with implementation of prevention and precautionary methods from fire and damage.
Duration: April -2000 to May -2004 Bangalore, India
Company Name: GE Thermo metrics India Pvt Ltd
Position: Safety Inspector
Company Info: Multinational Company in the field of Manufacturing and exporting of Thermistors. Worked as Safety Inspector for a period of 4 yrs handled storage & transportation of the Electrical & Electronics goods. Carried out the duty of inspecting fire fighting equipments, maintain and control the transaction of the vehicular movement, entry of the vehicles and proper and safe loading and unloading of goods.

________________________________________
Education________________________________________
B.A English (Calicut University, Kerala, India, ongoing)
________________________________________
PROFESSIONAL CERTIFICATES
________________________________________
„« IOSH Managing Safely -THE EXPERT GROUP, Doha- Qatar (June 2008)
„« OSHA-30 hours -Construction Safety And Health - Rocky Mountain Educational Centre Sharjah- UAE (July 2007)
„« Basic Rescue - Cirtificate of Training- Marine &Offshore Global Pty Ltd-AS/NZS
„« Work Safely At Heights- Certificate of Training - Marine & Offshore Global Pty Ltd- AS/NZS 1891.4 (2000) Standards.
„« Certified First Aider- Venture Gulf Training Centre, Doha, Qatar(Dec 23 2008)
„« Basic Scaffolding-- Technical Inspection Bureau, Abu Dhabi.
„« First Aid Training- St. John's Ambulance Association, Bangalore, India.(2003)
„« Fire Prevention& Fire Fighting- awarded ¡* Life Saver¡¨ certificate -- Usha Armour, Wilson Garden, Bangalore, India ( 2001).
„« Trainings undergone- Excavation, Permit to Work, Emergency Procedure, Commissioning Work permit procedure etc, Venue- Qatalum Project Site Office.
________________________________________
ITS SKILLS
________________________________________
Windows & Office tools
WINDOWS 98 & M.S OFFICE 2000, Internet, Typing Speed- 40 words.
________________________________________
LANGUAGES
________________________________________
English- Fluent
Hindi- Fluent
Malayalam - Native
Arabic- Working knowledge

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4501 to 4550 of 4805)

Go to Search Parameters...

Brief Description

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

NDT TECHNICIAN

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Instrumentation Supervisor

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Tehnical Skill: able to fix trouble shooting such as : Hydraulic, Electric and Power Train system of heavy equipment. Abel to manage more then 250 people subordinates

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

I have ability on heavy duty equipments operation,fms dispatch system using high technologies,mine supervision as well.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

International Safety / Risk Professional available for fulltime or contract employment.

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

I have my fisrt degree in ghana in one of the best universities in the country as well and am currently working with one of the biggest mining company in the country too.

departmental administration work, sales coordination, tender preparation, individual material costing. B.Sc. (Maths), Certificate and Diploma in Computers

I would like to apply for a position where I can use my extensive experience in Managing, Coordinating, Supervising, Inspecting and Maintaining and my dedication to quality in Systems installation, Electrical engineering, Maintenance and Repair to help you obtain your company's mission.

Power mechanical engineer 2001 good

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

an economics graduate from olabisi onabanjo university. i also belong to a professional memeber of the institute of chartered accountant of nigeria.

Blueprint Reading - Mig, arc and gas welding

Higher Diploma In Business And IT, UBS Computerised System, Basic Knowledge Of Computers And Web Publishing

HSE ENGINEER AND SUPERVISOR

Oracle, LPN, 3PL, Supply Chain, Imports, Logistics

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

BE in Mechanical Engineering.

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Logistics/Shipping Coordinator with 6 years experience in an EPC company handling various oil and gas projects worldwide. Proficient in logistics operation, with good communication and negotiation skills and could lead a group of people in a project.

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

Catia V5, Unigraphics, Pro-Engineer, Solid Edge

Working as a Piping Supervisor in the field of Oil/Petro-Chemical industries Maintenance & Project Work.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Supply Chain and Procurement Professional with international oil and gas project experience!

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

HUMAN RESOURCES PROFESSIONAL

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 [ 91 ] 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out