Resume - Process Engineer - Oil&Gas - Sulphur

Misco Jobs

Resume #85551

CONTACT INFORMATION:
View contact information...

Personal data
Age: 31
Date of birth: October 20th, 1977.
Nationality: Argentine.
Married without children

Work experience

Techint E&C (Argentina) – Process Engineer

December 2008 – March 2009
Camisea Project (Pluspetrol Plant, Perú): As part of the owner engineer group for Pluspetrol I was involved in:

Ethane Recovery Project Conceptual Study where several alternatives were studied and evaluated using Aspen KBASE and in-company cost data.

Malvinas Plant debottlenecking study where the plant off-sites were analyzed and recommendations made to cope with future expansions. Additionally the Slug Catcher was studied to understand current limitations for future expansions.

June 2008 - November 2008
Nitrogen Rejection Unit (NRU). Client: PEMEX. Ciudad Pemex, Tabasco, México:
Two trains of 315 MMSCFD each (Licensor: Costain) at the time the largest installed capacity in world.
Performed Dynamic Simulation (Aspen Hysys Dynamics) to optimize plant control and improve control loops design and tuning. Train # 2 start up: site process engineer during initial start up, covering cool down of plant and liquids generation. Plant operation: Using dynamic simulation and equipment data, plant variables were optimized to prepare the unit for the performance test. Performance Test: Participated in the plant performance test, preparing reports and adjusting design simulations with plant data (The performance test was passed successfully).

December 2007 – January 2008
Camisea Project (Pluspetrol Plant in Cuzco, Perú): Developing of startup procedures, working together with plant operations personnel, for a liquids recovery plant (Depropanizer and DeButanizer).

April 2005 – December 2007
Sulfur Recovery Unit (Petrobras Refinery in Bahia Blanca, Argentina):
Three stage Claus Unit with a BSR-MDEA (WorleyParsons) type tail gas and a DGAASS degassing unit (Goar Allison and Associates) for treating the produced sulphur.
Participated together with SuplhurExperts' technicians and engineers in capacity determination.
Detail engineering, utilities and equipment design. Held P&ID reviews meetings with licensor (Parsons in Arcadia, EEUU). Participated in Hazop meetings with client (Petrobras) and technology licensor (Parsons).
Equipment inspection and pre-commissioning during construction and commissioning of the unit
Start up: As a Process engineer I was in charge of start-up, coordinating tasks between the client and the licensor. Also was in charge of operator training.

April 2005 – December 2006
Sour water stripper (Petrobras Refinery in Bahia Blanca, Argentina) (Project still ongoing): Basic & detail engineering - Equipment inspection, pre-commissioning, commissioning, start up and troubleshooting - for the unit's revamp (The revamp consisted in turning a non refluxed SWS into a refluxed SWS).

August 2003 – February 2004
Depentanizer Unit (Enap Refinery in Talcahuano, Chile): Detail engineering involving consistency check of basic engineering documentation of a depentanizer unit provided by Axens. P&ID's completion, equipment data sheets, flare system design, utilities design.

August 2003
Technical assistance for a wastewater plant at company owned steel mills.

Software used: TSWEET, HYSYS, HYSYS DYNAMICS, PROSIM, Promax, AUTOCAD, HTRI, HTC, B-JAC, ICARUS KBASE, ICARUS IPE.

CHEVRONTEXACO (Argentina) – Drilling Engineer
March 2004 – March 2005
* Work at the drilling engineering department, well planning for 100 development wells. Directional and conventional drilling.
* Near horizontal well drill string design.
* Technical limit study for development wells.

Tecna Argentina (www.tecna.com) – Process Engineer
June 2001 – July 2003
* Engineering company specialized in projects for the oil & gas industry.
* Conceptual engineering for surface production facilities (British Petroleum, Argentina).
* Flare stacks & KO drums design.
* Flare system conceptual & basic engineering for the largest refineries in Argentina, located at La Plata (Buenos Aires) and Lujan de Cuyo (Mendoza).
* Indirect Heater Study for British Petroleum, Argentina. I Studied efficiency and calculated fugitive emission for the system.
* Conceptual engineering design of a bio-oil production plant for Dynamotive (located in Canada, www.dynamotive.com).

Software used: HYSYS, AUTOCAD, PIPESYS, VISUAL FLARE

Buenos Aires Institute of Technology
 Act as Adjunct Professor of Unit Operations II (Heat Transfer Equipment Design) from 2002 to date and as Professor of Unit Operations I (Fluid and Solid Mechanics for Chemical Engineers) from March 2009.

Education

Postgraduate studies
Postgraduate Course in Crude Oil, Oil & Gas Institute (University of Buenos Aires). Beginning: August 2003 (Not Finished Yet).

Degree:
Chemical engineer. Buenos Aires Institute of Technology, Argentina (1997-2002).

Languages

Spanish: native language.
English: advanced oral, writing and reading.
Portuguese: basic oral, writing and reading.

Software/Programs

Capital Cost Estimator: Aspen IPE, Aspen KBase.
Process simulators: TSWEET, HYSYS, HYSYS DYNAMICS, PROSIM Promax, SULSIM.
Pipeline simulators: Pipesys, ASPEN UPSTREAM, Visual Flare.
CAD: (AutoCAD).
CFD: basics of CFD modelling (Using Ansys CFX)
Heat Exchangers: HTRI, HTC, B-JAC (Thermal)
Others: Excel (Programming), Word, PowerPoint, Outlook, Internet Explorer.

Training Courses & Seminars

* AspentTech User Group Meeting – April 2007 – Made a presentation about "using aspen hysys dynamic as an operating procedure developing tool" based on a study case of a SWS
* Sulphur Recovery Seminar – Bernkastel – October 2006
* Hysys Dynamics – Aspentech Buenos Aires – March 2006
* XXII Interamerican Chemical Engineering Congress – Presented a paper in a poster session "Impact on a refinery by the installation of a new SRU"
* Ansys CFX – Introduction to CFD modelling (2006)
* Pressure safety valves (Tecna. March 2003)
* Pipeline design (Dictated by Guillermo Cordero, Techint 2005)
* Control valves (Techint 2005)
* Actuators (Worcester 2005)
* Pore pressure (Drilling Training Alliance, Houston 2004)
* Extended reach (Drilling Training Alliance, Houston 2004)
* Drillstring design (Drilling Training Alliance, Houston 2004)
* Wellbore stability (Drilling Training Alliance, Houston 2004)
* Corrosion in wells and surface facilities seminar (Neuquen 2004)

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 4806)

Go to Search Parameters...

Brief Description

Tendering & Proposals, Estimation, Project Planning, Quantity Surveying

Mining Engineer / Project / Operations Manager

I have completed B.Tech in the field of Electrical Electronics Engineering at 2009 and I also completed Diploma in the same field at 2005. I have a year Experience in Government Electricity Department at 2005-2006 in Puducherry, India. I attached my CV for your kind considerat

Have a vast professional experience in road construction; Can handle high pressure with ease and open mind • have handled various critical and challenging projects from design stage to implementation stage and ensured that the projects gets implemented as per specification in stipulated time with

Experienced safety professional and proven leader in the Environmental Health & Safety environment. I've developed and successfully implemented several innovative injury prevention programs which has resulted in millions of dollars saved in Workers' Compensation expenditures.

Ironworker, sheetmetal mechanic

I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.

Project Construction Manager (Fabrication, installation, Offshore Hook-up)

Process Engineer - Oil&Gas - Sulphur - Refinery

Asphalt Plant Manager/Foreman 38 years in asphalt production field

AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

Engineering, cadd designer, autocad, microstation

Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.

project in erection, maintenance and up gradation project of 40 MW power station and

Over 16 years of experience in leadership roles within complex operations, supervising diverse teams and managing challenging programs/assignments within U.S and international locations

Highway Laboratory / QC Manager with 25 years experience in materials

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Contract working, supervision of dam construction, geological worlks etc.

Electrician and editor of substation

Seeking a position in management with the opportunity for further career advancement through using sound judgment and personal performance. Will consider a staff position with opportunity for advancement.

BS biomedical engineering, looking for a job where i can use my knowledge and skills to overcome the problems.

I have done the project for International Power name "Feasibility of Electrical Energy Saving at HUB POWER station. and I can design different kinds s controlling circuits by using microcontroller,PLC and VFD.

A position of significant responsibility that builds upon extensive experience in construction management, expertise in managerial skills and cost analysis. Ultimate goal is to grow within and with the progressive organization that provides excellent career advancement opportunity

5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines

I AM A LAND SURVEYOR WITH CERTIFICATE QUALIFICATION.I HAVE 8 YEARS WORKING EXPERIANCES AS A LAND SURVEYOR IN CONSTRUCTION AND TITLE WORK IN MALAYSIA AND OVERSEA.

Repair & maintenance of plant & equipments used in construction, knowledge in overhauling of engines used in construction equipment, maintaining & preparing all technical reports related to plant

journeyman lineman service, const, underground cdl cpr overhead switching

I am a university-educated Canadian Registered Safety Professional with over 15 years of Environment, Health and Safety experience. This experience has included the development and implementation of EHS management systems, training programs, risk assessments and emergency response plans.

I have worked and performed 2 (two) years as HSE (Health Safety & Environment) in construction which one year in oil & gas project (pipeline and gas plant) and one year in civil package, erection in reconstruction cement plant project.

Over twenty-five years experience in Project/Construction Management in an Engineering Procurement and Construction Management environment, specializing in Project Controls, Planning and Scheduling. Project Controls background includes EP, EPC and EPCM.

Diploma in Mechanical/materials management with 17 Years expereice in Material Controlling and Piping looking for employment with reputed organisations.

QA/QC Supervisor, Welding Inspector

I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.

Electro-mechanical overhead crane repairman

Estimating,Quantity Surveying, Project Planning & Project Management

MILLWRIGHT Detailed oriented Gold and Red Seal (V1984) experienced Journeyman Millwright Foreman with experience in construction and petrochemical plant environments.

extensive experience in the field of pre-cast concrete products

Piping Designer PDS CAD

I am capable to handle Administration, Partner with HR, Security, Procurement, Vendor Management, Liaison and other assigned work given by the Management.

12 years of experience working in the oil and gas industry for production, service and engineering companies as planner/scheduler, cost controller, service planner. Experienced in scheduling and cost control procedures, data collection/entry/processing and analysis, data base maintenance, used speci

Rigger, works well at height

Basic education:College of Business Administrartion, Secondary ed. of engineering. Advanced sch: WTA ind.eng.; ISO Quality systems; Turu col of econ. int.marketing; Different schooling in marketing/sales. Lang.: ENG;RUS;FIN; EST. PC-MS Office; MS Project;ind.controllers user interf. Driv.Lic ABCE

I am a senior attending California Polytechnic University, Pomona, and I will be completing my Bachelor’s degree in Mechanical Engineering, along with a Minor in Materials Engineering Sciences, in the fall of 2009. I am currently seeking an internship or entry level position.

Mechanical Master, Master Gasfitter

Dynamic, highly adaptive professional offering 20+ years’ experience.

Electrical

Technical /Project Engineer

Electrical Engineer in profession, Knowledge in instrumentation and control, Design and trouble shoot's motor control, can do hard wirings,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out