Resume - Responsible for maintaining mining equipment and responsible for performing safe...

Misco Jobs

Resume #85807

CONTACT INFORMATION:
View contact information...

Age Date of Birth Place of Birth
Nationality Religion
Sex
Civil Status Height
Weight SSS No. TIN No.
Name of Spouse Address

47 years old July12, 1961
Pulilan Bulacan
Filipino
Roman Catholic
Male
Married
5'9"
170 Ibs.
03-6651349-3
188-737-348
Adelina Hernandez
245 Dampol B, Pulilan, Bulacan

Educational Background:

Vocational:

Bulacan College of Arts and Trade 1978 - 1980
Automotive Technician

Secondary:

Dampol 2nd High School 1974 - 1978

Primary:

Dampol 2nd Elementary School 1969-1974

Trainings / Seminars Attended:

July 1981 - December 1981

PNCC-CDCP

On the Job Training Basic on Hydraulic System

November 1991

Fire fighting
ABV Rock GR.P Kb Saudi Arabia.

Summary of Qualification

Has over 25 years of experience in the maintenance and repair of light and heavy equipment joining nine (9) companies spread over 25 years have acquired an extensive experience in maintenance and repair heavy equipment namely: TEREX, KENWORTH, CATERPILLAR, GROVE, SCRAPER, VIBRATORY ROLLER, TRAVEL LIFT, KHOERING CRANES, P & H, ISICHO CRANES, CMI ASPHALT FEVER, SIDE WINDER, CONCRETE PUMP, HINO, IZUSU DUMP TRUCK, MOTOR GRADER CAT, POCLAIN, BACHOE CAT, GARNER DENVER COMPRESSOR, DOZEN TEREX, EUCLID AND MOST RECENTLY ATLAS COPCO'S BOOMER MODEL #175 AND 178, CRAWLER DRILL 642 AND MITRO NOBEL TRUCK, ASPHALT PLANT, L120 VOLVO, HAMM, DYNA PAC.

Work Experience:

August 18, 2008
June 03, 2009 Heavy Equipment Mechanic
(Work Shop Dep't)
Coates Hire Operations
Lot 5 Torpe St,
Moranbah QLD
Australia

Job Description:

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ To maintain heavy equipment such as Asphalt Paver (Titan 325), Road
Sweeper, Volvo Loader (L 120D) and Milling Machine.
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly reports.

August 2005 –
March 2007 Generator Mechanic
( Main Workshop )
I.A.P Worldwide Services
Camp Victory Biap
Baghdad, Iraq
APO 09342

Job Description

Responsible for maintaining the 20MW Catterpilar Site model 3516 series 400V:11KV and Cummins 28MW/11KV/50Hz 400V:11KV responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operating efficiently and safely..
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly report

January 2000 – February 2004

Assistant Foreman
(Production Dept.)
North Luzon Expressway Project Anderson Aspha" Philippines, Inc. Pulilan Interchange, Brgy. Tibag, Pulilan, Bulacan

Job Description

Responsible for maintaining the biggest Asphalt plant in Asia with a capacity of 300 tonnes per hour and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ To maintain heavy equipment such as Asphalt Paver (Titan 325), Road
Sweeper, Volvo Loader (L 120D) and Milling Machine.
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly reports.

June 1998 – September 2000

Chief Mechanic
(Motorpool)
Housing and Land Development Project Elegant Star Corporation
Banangan, Sablan Benguet

Job Description

Responsible for maintaining h~avy equipment such as Bulldozer Model D 115, D85, Loader WA - 350-7 Avance Komatsu, Backhoe PC 200-7, Compactor. Dump Truck 360-12 cylinder Isuzu, Engine overhauling, under chassis and under carriage repair, hydraulic troubleshooting, light vehicle repair. portable air compressor, plate compactor and one bugger mixer.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Check oil and water regularly and keep the machine clean.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Carry out any assigned duties as required by the supervisor from time to time.

February 1994 – December 1998

Chief Mechanic
Housing and Land Development Project Prophil Development Corporation
Suite 312, Makati Executive Center cor., Herrera & Alfaro Sts., Salcedo Village, Makati City

Job Description

Responsible for maintaining 4 units of cranes namely P & Hand Kato RH25, engine overhauling, under chassis repair and under carriage. Hydraulic troubleshooting. Overhaul light vehicles and to maintain mixer trucks, Kubota welding machine and Vibrating compactor.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Check oil and water regularly and keep the machine clean.
~ Report faults or problems to Supervisor as soon as they occur.
~ Prepares maintenance checklist and analytical report of equipments. ~Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.

May 1993 – June 1994

Heavy Equipment Mechanic
(Main Workshop)
National fnviromental Preservation
BEEA'H (National Environmental Preservation) JubaiL Kingdom of Saudi Arabia

"

Job Description

Responsible for maintaining equipment such as Mercedes Tractor and trailers model 1924, 2632, 3232 OAF Tractor, turbo charger, Komatsu Bulldozer 0-85 A Forklift and loaders CAT 950B. Repair under chassis and under carriage repair and light vehicle repair.

Duties and Responsibilities:

~ Report faults or problems to Supervisor as soon as they occur.
~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition.
operated efficiently and safely.

March 1992 –April 1993

Heavy Equipment Mechanic
(Main shop)
Bridge
F.S. Foundation Specialist Plaridel. Bulacan

Job Description

Responsible for maintaining all the heavy equipment such as ISICHO Cranes, P &H and Khoering, Backhoe. Oumptruck. overhaul light and heavy equipment troubleshooting. Repair under chassis and under carriage repair, also responsible for maintaining the batching plant.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition.
operated efficiently and safely.

November 1991 – December 1992

Heavy Equipment Mechanic (Main workshop)
Saudi Strategic Storage
A.B.V. Rock Group KB.
P.O. Box 7816. Jeddah 21472, KSA

Job Description

Responsible for general reconditioning, overhauling heavy equipment such as Atlas Copco I s H-157 and H-178 Boomers, Crawler, Drills, Roc 642, Pneumatic Impact Machine, CAT Dozer, D8K and D7L P & H Crane, Sky lift and Shot Creek Mixer, Nitro Nobel Truck and Swevex Pump, Air Compressor and Teleporter.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

September 1990 - July 1991

Heavy Equipment Mechanic (Motorpool)
NIA Feeder Canal
PNCC
Imus, Cavite

Job Description

Responsible for maintenance and overhauling of heavy equipment such as Dump truck, Ken worth C for Model, Hino 7M20L Isuzu Grove RT 655, Poclain CK-150, P & Crane, Khoering Crane, Terex 82,30,82, 50 Model Bulldozer, Loader Model 7261, 7281 and also repair the under carriage and under chassis. Air system and hydraulic troubleshooting.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Transmission, brake system, cooling hydraulic and fuel system.

July 1988 – December 1990

Heavy Equipment Mechanic
(Main workshop)
Construction and Gasoline Station Ibrahim Alhudaithy Est.
P.O. Box 224 Riyadh KSA.

Job Description

Responsible for maintaining all construction equipment. general reconditioning, overhauling both light and heavy equipment such as Bobcat. Loader. Dump truck, mixer truck and also repairing of European and American vehicles. See to it that quality repair was conducted on every vehicle being repaired. Perform engine tune up if necessary.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

July 1981 –
June 1988

Heavy Equipment Mechanic (Main shop yard)
Central Shop Yard
PNCC - CDCP
Bicutan, Taguig Metro Manila

Job Description

Equipment repair of all hydraulic crane RT 65, RT 60, Grove, KATO RH 25, Back Hoe, Poclain and 245 Caterpillar, Graders, 12G to 14G, CAT Bulldozer. Terex and Loader, Air Compressor, Garner Denver and Atlas Copco, repair of under chassis and under carriage repair. Overhauling both light and heavy equipment..

Duties and Responsibilities:

);> General reconditioning of all heavy equipment.
);> Check oil and water regularly and keep the machine clean.
);> Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 4812)

Go to Search Parameters...

Brief Description

(15) years of Oil and Gas, Engineering, Procurement and Construction related experience enhanced with several college/university courses in Project and Supply chain management.I have excellent communication and negotiation skills, dependable, organized, proactive and hardworking

Master Plumber/ Master Pipe Fitter & Gas Fitter, Cert. 6G Welder

Engaged in major project execution of ROADS & HIGHWAY, AIRPORTS , COMMERCIAL PORT & POWER PLANT

Highly adaptable, mobile, positive, resilient, patient risk-taker and is open to new ideas. Productive worker with solid work ethic and exerts optimal effort in successfully completing tasks. Versatile all around worker which can handle multitasking

Experienced in Structural Steel Detailing. Highly proficient in AutoCAD, Capable to produce quality Erection plans and Shop Drawings.

I have over 20 years of specialised experience with varied role players such as Consultant, Contractor and client in the area of Project Control & Management. My experiences cover full range of services on the following categories • Business Process Engineering and Re-Engineering • Business Automat

Experienced CAD Technician with an excellent work ethic; loyal, and a team player.

Resourceful Project Superintendent and QA Supervisor with expertise in oil and gas industry project installations and industrial construction; focused on positively impacting cost control, resource maximization, timeline management, and team performance.

Over 25 years in the Construction Field

I've experienced for the boiler and energy sectors, in the commercial management and the site execution.

INSTRUMENT AND CONTROL ENGINEER, DCS SYSTEM AND CONVENTIONAL SYSTEMS EXPERIENCE.

I have over 18 years in experience in the construction,design and administration of large projects.

Diplam in civil engineer

+20 years work experience in fire alarm life safety, special hazards and low voltage industry. Bachelor of science in electrical engineering. NICET certified engineering technologist (Level 3 in fire alarm systems).

Construction management, and design of roads, infrastructure, utilities, pad sites, drainage and storm water management facilities.

Project Construction Management Professional have built High rise,Low rise,Industrial ,Infrastructrure and hospitality projects

Port Planning, Construction, project Management

An affiliate member of the Institution of Civil Engineering Surveyors. Experience of close liaison with the Client, Supervisor / Consultant Engineer, Contractor and Sub-contractor’s representative. Proficient in the management of keeping detailed records .

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Facade Design, Curtain walling, cladding design

Civil/Structural engineer

Installation of electrical control,installation of electrical pannel board,installation of equipment overhead crane,trouble shooting,electrical control/machine,termenation of low/high voltage cable jointer

40 Years experience as a welder, 15 Years Sub-arc

Dedicated, creative individual with broad experience in project controls and project administration demonstrating interpersonal and organizational skills, with a proven ability to learn and adapt to change efficiently.

Engineering Technician/ Facility Manager

Knowledge in repair, rewinding, servicing and maintenance of electrical equipment such as AC/DC motor and generator ranging from fractional horsepower up to 8000 HP low and high voltage, wet and dry type transformer, coils and etc.

Fifteen years progressive experience in Construction Management and Engineering, Experienced in building and civil engineering works namely, roads, drainage, sewer and water networks, earth works and deep shaft construction, Full Member of the Charted Institute of Building UK (MCIOB)

Free! Welder

A hard-working and dependable Professional Quantity Surveyor with with the ability to work well both independently and in a team. My fifteen years experience in the construction industry has resulted in a well rounded confident and experienced Professional Quantity Surveyor.

Special Inspector CWI/ICC, Bolting, Fireproofing, B1 Inspector

Construction and Maintenance Mechanical Manager / Superintendent / Supervisor

Construction HSE proffessional residing in Canada. I am looking for over seas employment on a major Construction project. I am a board certified health and safety consultant and Safety officer as well as having over 15 yrs of construction expeirence as a journeyman tradesman.

I am a highly competent person, trained and experienced in all facets of construction, construction management and leadership.

25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. Management assignments in 12 major projects.

Experienced structural engineer (US and Australian experience)

Mechanical Enginner with more than 16 years of experience in the field of Construction, Maintenance of Petrochemical, Chemical and Power plant

Acquire 17 years of experience as Mechanical Construction Field Engineer in Oil & Gas (Upstream & Downstream), Chemical, Petrochemical & Pharmaceutical projects. Experienced in Planning, Organizing & field monitoring activities related to Piping and Equipment (Rotary & Static) installation.

Career minded Hands on Professional with over 30 year’s industry experience which includes Project Management, Health Safety and Environmental Management along with Anti Terrorism Security Design within various Industries and Governmental Organisations.

Recently had the M.Sc. degree in electrical engineering from University of Technology

A result oriented leader with nearly 15 years of extensive experience in Project Management, Production, Plant Operations, Procurement, Erection & Commissioning and Maintenance Operations.

Experiienced in estimating, forensically challenged change orders, cost analysis, bid analysis and project supervision. I have accreditation for osha 10, 30, and osha 500(certified to teach the osha 10 & 30 hour classes)

Construction project manager

Ase Master Mechanic 22 years

Result-oriented leader with more than 20 years experience, intuitive manager with a strong technical attitude, self-confidence and change catalyst, specialist with experience in TQM, process improvements and process mapping.

B.SC. ENGINEERING, PROACTIVE TECHNIQUE,ISO9001:2000 & HSE

17 years in procurement, project management, planning

electrical/mechanical superintendent/ project manager

Civil Engineer with 17 years experience

Chief Finance Officer of Group having One Islamic Investment Bank in Dubai and Asset Mangement Company in Malaysai,

Expert in managing conglomerates and applying strategic planning and control instruments

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out