Resume - over 11 years of heavy equipment operation experience in multiple industries.

Misco Jobs

Resume #85844

CONTACT INFORMATION:
View contact information...

Heavy Equipment operator

HIGHLIGHTS OF SKILLS AND QUALIFICATIONS

* ƒnOver 11 years heavy equipment operating experience in landscaping, metal recycling and coal mining industries.
* ƒnCertified in excavator, tractor backhoe loader, bulldozer, bobcat, forklift and man-lift operation.
* ƒnƒnSkilled in metal chunk grappling, stacking, breaking, loading and off-road dump truck driving in metal recycling industry.
* ƒnƒnSkilled in snow removal and lawn care process.
* ƒnƒnSkilled in earth moving, road building, over burden and coal material processing in mining industry
* ƒnƒnStrong decision making and problem solving skills; Great teamwork performance

PROFESSIONAL EXPERIENCE

HEAVY EQUIPMENT OPERATOR 2006-2009
Triple M metal LP, Hamilton, ON

* ƒnƒnConducted pre-operational checks on equipment, cleaned, lubricated and refilled equipment
* ƒnƒnOperated excavator with Grapple, Hammer, Packer to process metal loading, breaking, cleaning and bed mould making
ƒn* ƒnƒnOperated off-road heavy truck (25-40 ton) hauling material.
* ƒnƒnOperated front-end loader working with Commander & Stacker to process material feeding, loading, moving and cleaning
ƒnƒnƒnƒnƒnƒn* ƒnƒnOperated Bobcat to maintain plant clean and tidy

HEAVY EQUIPMENT OPERATOR 2005--2006
Willand Grounds Maintenance, Thornhill, ON ƒn
ƒnƒnƒnƒnƒn* ƒnƒnOperated front-end loader with pusher to process snow removal in commercial and residential area.
ƒnƒnƒnƒnƒnƒn* ƒnƒnOperated mower and trimmer to provide lawn care service
* ƒnƒnOperated bobcat loader to replace turf with concrete tile

ON-SITE MINING SUPERVISOR 1991 ¡V 1999
AnTaiBao Surface Coal Mine, Shuozhou, China

* ƒnƒnConduct drilling and blasting process as a supervisor 1996-1999
* ƒnƒnMonitored excavating groups with 10 cable shovels(P&H), 100 mine trucks(Cat,Euclid,Webco), 10 motor graders(16G), 10 wheel dozers(834), 7 track dozers(D9) and 4 water truck operation as a shift supervisor 1994-1996
* ƒnƒnManaged an earth-moving project as a supervisor 1991-1993

OTHER WORK HISTORY

OWNER & OPERATOR 2002 ¡V 2005
Hop Service (Moving & Delivery), Toronto, ON

WAREHOUSE PERSON 1999 ¡V 2002
Fabric Fabric Ltd. Toronto, ON

EDUCATION AND TRAINING

MAN-LIFT CERTIFICATE 2008
Venetor crane Ltd. equipment rental inc.

SKID STEER LOADER 2008
J.H. Ryder Machinery Ltd.

MULTIPLE HEAVY EQUIPMENT CERTIFICATE 2005
Transport Training Centres of Canada Inc., Whitby, ON

FORKLIFT CERTIFICATE 2001
Davis Training Centre, Toronto, ON

CATERPILLAR AND KOMATSU BACKHOE EXCAVATOR CERTIFICATE 1992
AnTaiBao Surface Mine of China, Shanxi, China

BACHELOR OF ENGINEERING IN OPEN-PIT MINING 1991
Engineering and Technical University of China, Liaoning, China

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3401 to 3450 of 4757)

Go to Search Parameters...

Brief Description

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Authomotive technology major in hydraulic machineries and heavy equiptment

Power Plants Commissioning , Operation, HRSG Commissioning

over 11 years of heavy equipment operation experience in multiple industries.

I am a Diploma in Electrical and Eletronics Engineer with 3years experience in the field of Electrical Cad Designing and Electrical Control Panel Wiring, i do have knowledge in system administration and Primavera Project Planner.

Have a working knowlege of setting up total stations, performing traverses, level loops, topos, and drafting with Land Development Desktop

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Miner

National coordinator of Biokinetics at ESKOM (Electricity Supply Commision of South Africa). I hold a DPhil degree in Biokinetics, specializing in Work Simulation assessment and taks-specific job accommodation. I`ve been national coordinator for 4 years and I coordinate several other health projects

Cost Estimating, Project and Contract Management, Planning/Scheduling, Project Controls and Finance

Surveyor with diploma and 3 years of wide range of professional experience

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

Workshop / Fleet manager over 20 years experience

Technical Summary: More than twelve years of High-Tech manufacturing procurement under Department of Defense Contracts in compliance with C.C.A.S., FAR / DFAR Regulations and I.T.A.R.

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Mapping Draftsman, Cartographer, CAD Operator, Survey Draftperson, Mapping, Draftsman, GIS Technician, GIS Operator

Knowledgeable in all aspects of capital projects including but not limited to the planning phase, progress and cost tracking, material requisitioning, project reporting, project documentation, and scheduling. Proficient in analyzing cost trends and variances for clarification or correction.

Provide technical expertise, guidance and leadership for a variety of designated engineering projects at site.

SENIOR PLANNING ENGINEER (OIL & GAS)

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

Basic operational skills of the track hoe including safety procedures. Use of the engineer's level. Measurement of cross slope embankment and trench grade line using steel tape and level. Reading and understanding blueprints. Additional training on the backhoe and bulldozer.

Application for Heavy Equipment operator and mechanics.

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

Senior level treasury generalist with 20 years of experience in the treasury department of three Fortune 500 companies. Successful track record of transitioning treasury departments following acquisitions.

Maintenance, water purification, reverse osmosis, materials, logistics, management

Worked experience of 4 yrs. in the field of EIA and EMP for various infrastructure and construction projects including world bank funded projects.

CAD/CAM engineering

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith.

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

Electrician - Certified

Captain looking for a challanging position shore based as Marine/HSE Superintendent- Manager. I am an unlimited Master Mariner and I have recently achieved a MSc in Marine Operations and Safety Management.

Welder or Welder Supervisor

80 Hour Certification, 10+Years experience Construction, Light Mechanical Experience, 8+ Years Heavy Equipment Experience

Entry level electrical engineer resume

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Of late brilliantly completed the scheduled Training in Calibration, Testing and Conformity Assessment from RTC(ER), Govt. of India

I am a young ,dynamic, smart having a good percentage degree of production engineer.

I am Civil Engineering graduate and having three years experience in the construction field.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 [ 69 ] 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out