Resume - I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic posit...

Misco Jobs

Resume #86453

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS:

I am applying for a Rig/Heavy Duty Mechanic position. I am a very reliable and dependable individual. I take pride in my work and do it in a safe and timely manner. I have worked in many different multicultural areas both in Canada and outside of Canada where you have to be somewhat of a diplomat to get the job done. I have a very positive out look to life and I don't look at the glass as being half empty rather as half full. My various experiences in different industries bring new and diverse ideas to solving problems. I am a team player and am willing to take other peoples input and suggestions. I am also very motivated, self-starter and can for see things that should be done and not wait on till there is a problem. This comes from my on going training in preventive maintenance. I enjoy passing on my knowledge to apprentices and understudies. I feel that I can adapt to any industry and any situation that may arise.

EDUCATION:

* Grade 12 diploma
* Journeyman Heavy Duty Mechanic - Sept.17/86 Red seal inter-provincial #J-06-10035
* Journeyman Automotive Mechanic - Sept.2/82 Red seal inter-provincial #J-13-07185
* Fuel injection up-date, 30hr. L.C.C. AB - Nov.9/85 File # 09-A026066
* Hydraulic course, 80hr, Foremost, AB
* Receive award for highest marks, 3rd year Heavy Duty, L.C.C. Lethbridge, AB
* Hydraulic course, 100hr put on by Vickers/Tanco (May 2000)
* Cat 3500B, training course (May 2006)
* Canrig Top Drive course (Nov 2005)
* Valid class 1 with air, international drivers license
* Valid passport (2013)
* Have worked in Venezuela, India, UAE and Papua New Guinea
* Basic Offshore Safety Training (09CB-0605 valid till 21-07-2012)
* First Aid/CPR-C (St.John Ambulance 120460 valid till 08-16-2012)

EMPLOYMENT:

Presently:
High Arctic Energy

Red Deer, Alberta
403-310-7682(SNUB)

Duties included:
* Hydraulic Mechanic, maintenance and overhaul.
* Assist rig mechanic when needed.
* Hydra-static, rack & pinion Draw-works (EDM)
* Hydraulic top drive (TB Woods)
* All other hydraulic units. Iron Roughneck (NOV), Hydraulic catwalk
* Cyber Chair controls (Sence)

Started: Oct. 30/08 to Still employed

Precision Drilling International/ Weatherford International

Houston, Texas
713-693-4216

Duties included:
* Rig Manager for one week after the rig manager was asked to leave (April6/06 to April 13/06).
* Working in Venezuela, 28 days on and 28 days off, camp job.
* Maintenance and overhaul of all equipment on Top Drive Electric (1500 HP)
* Types of equipment on drilling rig are: 3512 Cat engines, Canrig Top Drive 275 ton, Emsco F1000 Mud Pumps, Continental Emsco Drawworks, IT28 Cat Loader, Brandt Shale Shakers, Halco 1180, 2500 Pumps and other miscellaneous equipment.
* This is a pad operation where 14 to 20 holes are being drilled. The rig is self-contained and is able to skid from hole to hole on mat rollers.
* The holes are all horizontal and directional drilling is used.
* PM program is used and I look after the program both on the computer and hard copy in a filling system. This is all reported to the mechanical supervisor in the main office. I am familiar with Excel and Word programs.

Started: Dec. 2003 to Oct 30/08

CEMENTATION/SKANSKA /AURORA QUARRYING

Flin Flon, MB
204-687-3969/204-687-2350

Duties included:
* Maintenance and overhaul of underground equipment
* All underground work
* Experience with Tamrock jumbo, Wagner scoops, 35& 40 ton trucks, scissor-lifts
* Rebuild jacklegs, stoopers & welden & sandpiper pumps
* Maintenance and overhaul Toyotas
* Preventive Maintenance system was in use.

Started: March, 2002 to Dec. 2003

MILLENNIUM MECHANICAL

Bissett, MB
204-277-5535/866-269-1248

Duties included:
* Maintenance and overhaul of underground equipment
* All underground work
* Subcontracting to Aurora, HBMS, Mussel White Mines and MacIntyer Mining

Started: Oct/2001 to March/2002

HARMONY GOLD

Bissett, MB
204-277-5552 (Ian Kasperski)

Duties included:
* Maintenance and overhaul of mining equipment
* All underground work
* Experience on Tamrock jumbo, Tamrock scoops and J.C. rock trucks lifts and other equipment
* Worked on mine shut down and removal of underground equipment

Started: March/2001 to Sept/2001

SELF EMPLOYED (Riverland Repair)

Subcontracting to First Nations:
Garden Hill, Red Sucker Lake, Oxford House

Duties included:
* Maintenance and overhaul of equipment; D6 Cats, graders, tandem trucks, water and sewage trucks, track hoes, wheel backhoes, cars and trucks
* Foreman on the construction and maintenance of the winter road

Started: April 92 to March 01

TANTALUM MINING
Lac du Bonnet, MB
204-884-2400

Duties included:
* Maintenance and overhaul of mining equipment, Emco scoops, 20 ton truck, Atlas Copco Jumbo, Tamrock air jumbo, track giraffe and other related equipment

Started: April/89 toApril/92

CRUSH RITE CONSTRUCTION
Esterhazy, SK

Duties included:
* Maintenance and overhaul of all equipment: Cat engines, 3208, 3306, 3406, 3408, Cat loaders, Ford 9000 & 8000 trucks, gravel crushing and concrete equipment, also other related equipment
* Supervision of truck drivers
* Operate loaders and trucks when needed

Started: Aug/86 to March/89

GOLDEN PRAIRIE FARMS
Wrentham, AB

Duties included:
* Maintenance and overhaul of farm equipment; John Deere 4 wheel drive tractors, harvest and seeding equipment
* Supervision of 7 to 9 men
* Operate farm equipment when needed

Started: Nov/83 to Aug/86

DOT-LYNN SALES/L.B.R.CONTRACTORS
Grimshaw, AB
403-332-4230

Duties included:
* Operate and maintenance of seismic equipment; Gardner Denver drills, Foremost flex track swamp buggies, GM tandem trucks
* Repair of all makes and models of cars and trucks
* General welding and fabrication welding

Started: Nov/76 to Oct/83

PERSONAL:

* Excellent health
* Into all sports, camping, fishing, hobby farming, traveling
* Good at gas, arc and Mig welding
* None smoker
* Very good with hydraulic systems
* Good welding skills, both cutting and arc welding
* Preformed major overhauls on engines, transmissions, hydraulic systems, top drives, gear boxes
* Good knowledge of computers, excel, word, and outlook.
* Excellent with PM systems both with hard copy and computers.

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 4806)

Go to Search Parameters...

Brief Description

Remote Site Expert : Global Experience.

Many years in Construction Administration and project management with responsibility for Pre-Design to Post construction, putting together all consultants, Architect/MEP and design teams, Manage all project elements and interior design scope, environmental permitting, all portions of the contract.

Senior Construction Project Manager

SENIOR HEALTH, SAFETY AND ENVIRONMENTAL MANAGER

Project Controls, Cost and Planning

Experience in multistoreyed buildings

I have involved in petrochemical, oil/gas, and heavy industrial projects. I have strong academic achievements, excellent interpersonal skills, and positive attitude, Commitment and desire to perform engineering design. I am also exceptionally well organized and highly motivated and able to pull toge

Worked In Cama Motor ¡V A¡¦ bad as Diesel & Petrol Mechanic under Apprentice Act 1956 for 1 year [i.e: 01/10/2005 to 30/09/2006].

Seeking a Challenging Position in the area of IT Support with an on going Opportunity for Professional Growth of CHIYODA CORPORATION in Japan.

16+ years experience HVAC Engineer with intension to work in Oil and Gas field

Sr. Projejct Document Controller-Exp of 12 years in Oil & Gas/Power Project Industry

More than 14 years of experience in all aspects of Customer Care Services, Facilities Management Services, Guest Relations Operations, Administrative and Support Functions. Ability to communicate effectively at all levels.

Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.

Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Access, Word, Outlook.

Engineering / Construction Management

Looking for job in equipment maintenance and repair

A certified Engineer-in-Training. Possess a Master of Engineering Degree in Civil Engineering from the University of British Columbia, Canada. Worked as an Assistant Project Manager with the California Department of Transportation.

Twenty Three (23) + years hands on Industrial, Commercial and Utility Electrical Field experience including installation and maintenance of low, medium and high voltage switchgear.

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

Self-motivated executive, MBA, experienced in Plant start ups, manufacturing, Operations, Quality Systems Implementation, Lean manufacturing implementation & Training. Green Belt Certified and Auditor Certified.

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

Possess high standards of organizational skills, work with minimal supervision, have the ability to prioritize workload, team player and self-motivated, ambitious and goal-oriented with a clear vision of future objectives, open-minded and resourceful, with an enquiring mind and optimistic outlook.

Diploma in Occupational Safety(OSHAS)

Preparation of documents, materials,and equipments.hauling of materials., Schedulling works. fabricate, erection, installation.

I am writing to introduce myself to you as a future graduate of University of Texas at Arlington. I will be graduating with a Master’s in Civil Engineering in December of 2009.

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Cost control / planning engineer with 7 years exp.

Preparation and submission of quotations, Site supervision to ensure safety and timely completion

I have diversified vast professional experience in the construction industry. Have managed and worked with complex competitive challenge projects and have implemented them successfully with efficiency and quality. Expertise in Project Manger, Expertise in Checker, Expertise in Project

„X Diversified and proven experience in program management & development of infrastructure projects, including highways, rural roads, jeepable tracks, water supply, sanitation and irrigation schemes with regards to social mobilization, planning, implementation, contract administration

NUCLEAR SAFETY ENGINEER / NEBOSH INTERNATIONAL

12 years work experianc in plumbing supervisor/engineer

Microstation 2D & 3D Designer

Senior executive with 17 years experience with MEP, design build, G .C., PM firms and owners side construction. New business operations, new division creation with demonstrated success in entrepreneurial environments. Projects consisting of ground up construction, renovations, commercial

Welding Supervisor: SSCL.DME (3years welding), WI (QA/QC), Safety qualified,21years Experience, worked with ASME, AWS, API standard in Major EPC Industries such as Onshore, Upstream ,Petro-chemicals (Offshore piping & Structures, Oil & Gas Piping, Steam Boiler Piping, HP vessels & Storage Tanks) .

Water Resources Hydrologist and Civil Construction speacialist

I am Mechanical Engineering graduate from India and having more than 20 years of experience in the industry. I would like to stick to my last employment of Facility Manager.

I am a 41 year old Civil Engineer with over 20 years of "hands on" construction experience. However, I have only had a Civil Engineering degree for 2 years.

Refinery, tank farms, pipelines, gas plants, flow stations and production units. Engineering, procurement, construction and testing/commissioning.

I m land surveyor and my experience in all types of Survey work in road, Concrete structure, Buildings, Steel structure, Pipe lines, Drainage & Underground mines Survey.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

Young, energetic and high qualified engineer in construction works. Well experienced especially in Marine and Civil Construction in Midle East and Asia countries such as: UAE, Vietnam, Cambodia, Singapore, and Indonesia.

MD. RIYAZ AHMED

Heavy equipment operater excavater,backhoe any controls, all dozers, scrapers, finish blade hand project manager,estimater, under pipe line superintendant,mass grading superintendent

Coatings Contractor

I am an well experienced document controller/handover documents coordintor, compiilng health&safety files, asset maintenance documents, and extensive use of document tools.

Civil engineer

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

working as csu saferty officer in sabic,I am having Industrial safety diploma from annamalai university.chennai

3d/2d Autocad Operator

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out