Resume - Experienced structural engineer (US and Australian experience)

Misco Jobs

Resume #86760

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Employment that provides opportunity for building/bridge design as structural engineer

EXPERIENCE:

Robert Bird Group Pty Ltd Brisbane, QLD, Australia
10/2007 to 06/2009 Senior Structural Engineer
Mainly involved in prestressed and reinforced concrete structure design including mid rise and high rise residential/commercial buildings.
1. The Oracle-- Broadbeach Gold Coast, QLD
To be completed in 2010, The Oracle features two mixed use towers of 50 and 40 stories height. This project encompasses three basements and four podium levels over 12,000 m2 site. The towers promise never to be built out of ocean views while also being located just minutes from Oasis Shopping Center, the Gold Coast Convention Center and Jupiters Casino.
Involved design of hydrostatic basement slab, podium Level 2 and other floors; conducted design check/review of the typical floors done by others;

2. Newstead Waterfront development Brisbane, LD
Midrise high end residential development with river view. Buildings # 60 and 61 have total area of 48,000 m2; Both of which are 5 story PT buildings with large landscape/podium—Involved in the hydrostatic basement design and podium transfer slab design, including section detailed design;
Conducted design check/review for other PT podium slabs;
3. Allisee Stage II-- Building # F and G Hollywell, QLD
These two residential high end buildings have total area 14,000m2, 5 story high with RC slabs and Roofs.
Involved in typical floors and roofs design check/review by using RAM Concept and RAPT.

4. Commercial Development at Montpilier Road Bowen Hills, QLD
This building has 4 stories above ground with 3 level basement, total area around 24,000 m2. Conducted complete design check/review of gravity system of the building including PT /RC slab design, steel work and masonry structures

5. Bulky Goods Retail Center Brisbane, QLD
Involved in preliminary design of steel framework and foundations including ground beams, pad footing and piles.

6. KGUV Lots 2, 3 & 5 Development Brisbane, QLD
Conducted lateral analysis and preliminary design of core walls for Commercial Tower East which features 12 stories above ground with 4 level basements;
Involved in gravity system preliminary design including slabs and columns for QUT Performance
And Music Building that has 9 stories total including typical floors and basements. Also, conducted preliminary design of core walls with ETABS.

MaisonWorleyParsons, Inc. Beijing, China
7/2007 to 10/2007 Senior Structural Engineer
Design lead of the Intake structure for the River Hill Power Project which was located in PA, USA.
Supervised junior engineers in the design and coordinated between Beijing office and overseas office.

Bob Rude Structures, Inc Fort Myers, FL, USA
11/2004 to 03/2007 Structural Engineer
Mainly involved in post-tensioned concrete, steel and masonry structure design and analysis including high-rise and mid-rise buildings. The selected projects done during this period are listed as followings.
1. Naples Yacht Club—three story masonry and concrete structures. Responsible for beam, grade beam and filigree concrete slab design;
2. Atterbury Residence---two story $15 million beach residence. Designed wood connection, timber, concrete and steel beams, columns, grade beams and piles; responsible for wind load analysis;
3. O'Neill Residence---two story concrete single-family house. Designed foundation, two way slab, columns, beams, retaining walls, etc. Also cooperated with drafter to help with drafting set up;
4. Renaissance Village---Five-story concrete building commercial-residential complex that includes 10 building totally. Responsible for prestressed concrete slab design for buildings C,D, E and F.
5. Residence @ Douglas—21-story high-rise concrete condominium building. Designed 5 story concrete parking garage including sloped prestressed concrete slabs, columns and shear walls;
Also, conducted the design of PT slabs in the main building including punching shear check;
6. Ritz Carlton Hotel--- 5 story luxury hotel. Designed prestressed concrete slabs for the tower part;
Also designed curved shape two-way slabs and slabs on-grade;
7. Florencia---22-story high-rise concrete condominium building. Built ETABS strength and dynamic models; designed PT slab for heavily loaded landscape deck;
8. Naples Bay Marina West--- 4 story mid-rise concrete residential and commercial complex. Designed all the PT slabs for buildings A1, A2 & C; checked the punching shear for all the slabs;
9. Santa Rosa---10 story concrete condominium building. Conducted design development to determine slab thickness and column sizes; Performed wind load analysis based on AISC 07 and built ETABS dynamic model;
10. Conducted PT design of heavily loaded landscape decks for these high-rise concrete condominium buildings including Arezzo, Revenna, Tercerria @Bayside, Palazzo Delmare, Lesina and Tuscany.

L-C Associates, Inc Rocky Hill, CT, USA
02/2002 to 8/2004 Structural Engineer
Participated in the reconstruction of I-91/I-95 and Route 34 Interchange. The work included but not limited to bridge and retaining wall design. Mainly involved in retaining wall design, prepared plans, quantities and cost estimates.

Participated in the design of Milford/Darien, CT railway station, involving in R.C platform, spread footings and elevator well design as well as shop drawing check. Performed calculations/analysis for precast Double-T concrete platform, spread footing and elevator well.

Worked with Ammann & Whitney as sub-consultant, New York, NY
Mainly involved in construction support for the project of Triborough Bridge Deck Replacement, working on the shop drawing check including orthortropic decks, steel stringers, finger, cross beams, precast concrete deck panels, barriers and curtain walls, etc. Also provided miscellaneous calculations and CADD sketches for the response to the client. Conducted design of precast concrete curtain walls.

Steelox Systems, Inc Washington Court House, OH, USA
04/2000 to 01/2002 Structural Engineer
Mainly involved in pre-engineered steel buildings including structural analysis, designs and technical services;
Functioned as the main contact person for all correspondence regarding the projects involved;
Performed computer-based structural analysis and design using computer software such as AutoSteel, IDEAS etc. as well as design by hand;
Helped detailers and CADD Operators to finish reaction/approval/permit drawings and answer any technical questions from them;
Coordinated with architects, builders/contractors and outside engineers involved in the projects to ensure customers receive the appropriate building designs; answered technical questions from contractors and helped to solve any construction difficulties.

SELECTED PROJECTS:
I have finished more than 70 totally design of steel buildings at Steelox. All of buildings are steel moment frame buildings which were designed by using software like IDEAS, AutoSteel, etc. The building types include commercial, office, school, industrial and aircraft hanger, etc.
12/2001 Design Engineer Front Range Power, Fountain, CO
Designed a generator enclosure with 13,000 ft2
11/2001 Design Engineer Bacon Veneer Co, Grundy, IA
Designed a 40,000 ft2 warehouse with top running cranes
09/2001 Design Engineer Granite City Tool, Waite Park, MN
Designed a 12,000 ft2 sales & rental commercial building
07/2001 Design Engineer Krueger Auto & Truck Villa, Waverly, IA
Designed a 14,768 ft2. auto dealer service building
04/2001 Design Engineer Rochester Aviation, Rochester, MN
Designed a 160' span, 20,000 ft2 aircraft hanger
11/2000 Design Engineer Reading Rock, Butler, OH
Designed a 4 span, 221' wide, 161' long, 32' tall manufacturing building
09/2000 Design Engineer Signature & Sportware, Parsons, KS
Designed a 26,250 ft2 manufacturing building
06/2000 Design Engineer Fitwell Properties, Saint Cloud, MN
Designed a 17,500 ft2. 2 span warehouse

The University of Connecticut, Storrs, CT, USA
08/1996 to 08/1998 Research Assistant
Thesis topic: Design Against Progressive Collapse of Space Trusses.
Developed a geometrically nonlinear method and FORTRAN program to analyze progressive collapse of space trusses.

Central Research Institute of Building & Construction, MMI, Beijing, China
08/1990 to 07/1996 Structural Engineer
Performed new building structural analysis and designs, existing building inspections and rehabilitation designs.

Office Structure - Beijing Congress Office Building
Design of steel conference hall (36m span) and steel tennis enclosure (25m span) on the roof of an existing 6-story R.C moment frame building. Performed site inspection, structural analysis/design of steel systems including the gravity, connection between roof and new structures as well as its bracing system. Seismic and lateral deflection is main concern for this project. Software used: STAAD & AutoCAD.

Industrial Structure - Baotou Iron & Steel Co., Ltd.
Inspection/rehabilitation design of a 20,000 m2. multi-story reinforced concrete frame structure subjected to corrosion damage and heavy loadings such as crane and impacts;
Drafted owner's inspection report, supervised project, managed field inspection, and performed structural analysis, conducted rehabilitation design of precast concrete roof panels and steel roof trusses. Software used: SAP & AutoCAD

Industrial Structure - Dalian Iron & Steel Co., Ltd.
Inspection/rehabilitation design of a (1-story) 15,000 m2 iron ore smelting plant subjected to extreme temperature damage; Its structure features masonry bearing walls and R.C slabs with interior R.C columns.
Supervised project, drafted owner's inspection report, managed field inspection, and performed structural analysis and rehabilitation design of R.C slabs and beams. Software used: SAP & AutoCAD

Commercial Structure - Shuangqing Shopping Mall
Design of 12,000 m2 (4-story) shopping mall building that structurally features reinforced concrete frames,
C.I.P concrete slabs with shear walls; The foundations are spread footings.
Performed structural analysis with SAP and drafting contract plans with AutoCAD; conducted design of moment frames and spread footings using PK/PM design software; conducted shop drawing check.

Industrial Structure - Nanjing Iron & Steel Co., Ltd
Inspection and re-design of an existing 25,000 m2 multi-story reinforced concrete/steel frame industrial building which is iron-steel shop plant suffering from high temperature and chemical corrosion. This industrial building structurally features multi-story, multi-span precast concrete frames, prestessed concrete/steel crane girders, prestressed concrete/steel roof systems.
Drafted owner's inspection report, performed field inspections and structural analysis. Redesigned some of prestressed roof trusses and precast roof panels. Software used: SAP & AutoCAD.

Industrial Structure - Baotou Iron & Steel Co., Ltd.
Inspection/rehabilitation design of an existing 100,000 m2 iron-steel shop roof systems which are composed of a various types/spans of pre-stressed concrete/steel truss and precast concrete roof panel systems;
Conducted field inspection; Performed structural analysis using SAP program for prestressed concrete and steel trusses, Re-designed prestressed concrete roof trusses and precast concrete roof panels and drafted contract plans using AutoCAD. Seismic was taken into account as well as heavy industrial loads and severe corrosion condition.

SOFTWARE:
RAM Concept ETABS STAAD III RAPT AutoCAD Marc FEM Software ENERCALC Waldes SAP MS Office IDEAS MATLAB AutoSteel FORTRAN Adapt-PT

EDUCATION:
The University of Connecticut, Storrs, CT, USA
08/1996 to 08/1998 M.S.C.E - Structural

Xi'an Institute of Metallurgy & Construction Engineering, Xi'an, P.R. China
09/1986 to 07/1990 B.S.C.E – Structural

REFERENCES:
Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 4814)

Go to Search Parameters...

Brief Description

(15) years of Oil and Gas, Engineering, Procurement and Construction related experience enhanced with several college/university courses in Project and Supply chain management.I have excellent communication and negotiation skills, dependable, organized, proactive and hardworking

Master Plumber/ Master Pipe Fitter & Gas Fitter, Cert. 6G Welder

Engaged in major project execution of ROADS & HIGHWAY, AIRPORTS , COMMERCIAL PORT & POWER PLANT

Highly adaptable, mobile, positive, resilient, patient risk-taker and is open to new ideas. Productive worker with solid work ethic and exerts optimal effort in successfully completing tasks. Versatile all around worker which can handle multitasking

Experienced in Structural Steel Detailing. Highly proficient in AutoCAD, Capable to produce quality Erection plans and Shop Drawings.

I have over 20 years of specialised experience with varied role players such as Consultant, Contractor and client in the area of Project Control & Management. My experiences cover full range of services on the following categories • Business Process Engineering and Re-Engineering • Business Automat

Experienced CAD Technician with an excellent work ethic; loyal, and a team player.

Resourceful Project Superintendent and QA Supervisor with expertise in oil and gas industry project installations and industrial construction; focused on positively impacting cost control, resource maximization, timeline management, and team performance.

Over 25 years in the Construction Field

I've experienced for the boiler and energy sectors, in the commercial management and the site execution.

INSTRUMENT AND CONTROL ENGINEER, DCS SYSTEM AND CONVENTIONAL SYSTEMS EXPERIENCE.

I have over 18 years in experience in the construction,design and administration of large projects.

Diplam in civil engineer

+20 years work experience in fire alarm life safety, special hazards and low voltage industry. Bachelor of science in electrical engineering. NICET certified engineering technologist (Level 3 in fire alarm systems).

Construction management, and design of roads, infrastructure, utilities, pad sites, drainage and storm water management facilities.

Project Construction Management Professional have built High rise,Low rise,Industrial ,Infrastructrure and hospitality projects

Port Planning, Construction, project Management

An affiliate member of the Institution of Civil Engineering Surveyors. Experience of close liaison with the Client, Supervisor / Consultant Engineer, Contractor and Sub-contractor’s representative. Proficient in the management of keeping detailed records .

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Facade Design, Curtain walling, cladding design

Civil/Structural engineer

Installation of electrical control,installation of electrical pannel board,installation of equipment overhead crane,trouble shooting,electrical control/machine,termenation of low/high voltage cable jointer

40 Years experience as a welder, 15 Years Sub-arc

Dedicated, creative individual with broad experience in project controls and project administration demonstrating interpersonal and organizational skills, with a proven ability to learn and adapt to change efficiently.

Engineering Technician/ Facility Manager

Knowledge in repair, rewinding, servicing and maintenance of electrical equipment such as AC/DC motor and generator ranging from fractional horsepower up to 8000 HP low and high voltage, wet and dry type transformer, coils and etc.

Fifteen years progressive experience in Construction Management and Engineering, Experienced in building and civil engineering works namely, roads, drainage, sewer and water networks, earth works and deep shaft construction, Full Member of the Charted Institute of Building UK (MCIOB)

Free! Welder

A hard-working and dependable Professional Quantity Surveyor with with the ability to work well both independently and in a team. My fifteen years experience in the construction industry has resulted in a well rounded confident and experienced Professional Quantity Surveyor.

Special Inspector CWI/ICC, Bolting, Fireproofing, B1 Inspector

Construction and Maintenance Mechanical Manager / Superintendent / Supervisor

Construction HSE proffessional residing in Canada. I am looking for over seas employment on a major Construction project. I am a board certified health and safety consultant and Safety officer as well as having over 15 yrs of construction expeirence as a journeyman tradesman.

I am a highly competent person, trained and experienced in all facets of construction, construction management and leadership.

25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. Management assignments in 12 major projects.

Experienced structural engineer (US and Australian experience)

Mechanical Enginner with more than 16 years of experience in the field of Construction, Maintenance of Petrochemical, Chemical and Power plant

Acquire 17 years of experience as Mechanical Construction Field Engineer in Oil & Gas (Upstream & Downstream), Chemical, Petrochemical & Pharmaceutical projects. Experienced in Planning, Organizing & field monitoring activities related to Piping and Equipment (Rotary & Static) installation.

Career minded Hands on Professional with over 30 year’s industry experience which includes Project Management, Health Safety and Environmental Management along with Anti Terrorism Security Design within various Industries and Governmental Organisations.

Recently had the M.Sc. degree in electrical engineering from University of Technology

A result oriented leader with nearly 15 years of extensive experience in Project Management, Production, Plant Operations, Procurement, Erection & Commissioning and Maintenance Operations.

Experiienced in estimating, forensically challenged change orders, cost analysis, bid analysis and project supervision. I have accreditation for osha 10, 30, and osha 500(certified to teach the osha 10 & 30 hour classes)

Construction project manager

Ase Master Mechanic 22 years

Result-oriented leader with more than 20 years experience, intuitive manager with a strong technical attitude, self-confidence and change catalyst, specialist with experience in TQM, process improvements and process mapping.

B.SC. ENGINEERING, PROACTIVE TECHNIQUE,ISO9001:2000 & HSE

17 years in procurement, project management, planning

electrical/mechanical superintendent/ project manager

Civil Engineer with 17 years experience

Chief Finance Officer of Group having One Islamic Investment Bank in Dubai and Asset Mangement Company in Malaysai,

Expert in managing conglomerates and applying strategic planning and control instruments

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out