Resume - Mechanical engineer, qa qc engineer, construction engineer

Misco Jobs

Resume #86920

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
- Manufacturing Process, Metallurgy development, Production, Quality Control and Assurance on the job training in Mitsubishi Metal Corporation, Okegawa Plant, Saitama Shi, Japan (Japan,October 2000)
-Welding Inspector CSWIP 3.1 By TWI
-BGAS CSWIP 3/2 Painting Inspector By TWI
-Welding Inspector from Department of Industry Agency for Industrial Research & Development Institute for Research & Development of Material & Technical Product Bandung (Bandung, 1999)
-Painting Application and Corrosion Prevention by Jotun
-ASNT TC IA level II for Dye Penetrant Inspection
-ASNT TC IA level II for Magnetic Particle Inspection
-ASNT TC IA level II for Radiographic Examination
-Internal Auditor Course ISO-9000 by Bureau Veritas
-Training Project Management (International Certification) – Learnit
-Implementation of Reliability Centered Maintenance (RCM) & Risk Based Inspection (RBI) in Plant Facilities by PT. Handal Wira Mandiri
-Hazard Hazard Identification and Risk Assessment training conducted by PT. Mitra Archipelago Investment with Marine & Offshore Group
-Supply Chain Management based on Just In Time conducted by PT. IDS
-Risk management in business and insurance Perspective-seminar
------------

OBJECTIVE:
------------
Mechanical Engineer/QA QC Engineer/Construction Engineer
------------

WORK EXPERIENCE:
------------
May 2006 - present
PT.Amerada Hess – Onshore Construction and Mechanical Engineer
Phase I for Onshore processing Facility – Completed project
Phase II for Oil Treatment Facility and LPGF Plant – Completed project
Scope of Work:
* Develop and maintain Procedure for Pre-Fabrication, erection, installation, Inspection and pre commissioning of static and rotating equipments
* Perform inspection at site for the equipments comply to Company Specification and Code
* Provide Technical Support to Company Package's Manager and assists him with project planning and scheduling.
* Review the technical aspects of the construction/erection procedures and methods to assure that they comply with and satisfy the requirements of codes, standards, specification and drawings and assists with interpretation of those documents as required by Company
* Responsible for ensuring all construction work is subject to Job Safety Analysis /Safety regulations
* Responsible for Review Fabrication Engineering Documents
* Responsible for review Heavy Lifting Activities at site
* Handling the installation, pre commissioning, commissioning for package system, such as compressor package, TEG package, turbine package, produce water package, utility package, Turbo expander package
* Serves the Liaison between the site and Home office Engineering department
* Assist Company 's Package Manager with progress reporting, trend analysis and recovery planning
* Assist pre Commissioning Manager to accomplish project and ready to start up
November 2004 – May 2006
PT. CHEVRON - UNOCAL INDONESIA Co. – PIPELINE INSPECTION
ENGINEER CONSULTANS For Pipeline Integrity Management Systems
(PIMS) with 138 Pipelines total Lengths 537 Km)
Scope of Work:
* Develop and Maintain inspection and maintenance routines for onshore topside and sub sea elements of the pipelines
* Perform the inspection for cathodic protection systems for pipeline system
* Review day to day Inspection reports from contractor
* Assess reported defects (anomalies) and other condition information
* Monitor approved sub sea maintenance activities
* Maintain survey and inspection records of all the Inspection activities into database
* Maintain the historical record of defects and develop the anomaly database
* Prepare and provide recommendation relating the integrity, routine maintenance, intelligent pigging activity
* Coordinate within the southern and northern field to prepare the implementation of PIMS
* Supervise the intelligent pigging activity at site

PT TOTAL E & P INDONESIE –PROJECT SUPPORT SERVICES
(STRUCTURAL, PIPELINE, PIPING ENGINEER) FOR "PECIKO 4/EPSC 2"
Project: Hook-up modification MWP-A, MWP-B,MWP-C (pipeline, piping, instrumentation and structural works within SIMOPS methods for offshore project)
Scope of Work:
* Provide Support and assistance to Construction team for preparation and review of document, procedures, and approved drawing review the vendor documentation
Material verification
* Generate responses to contractor design queries
* Ensure and asses all the above complies with company specification, design codes and is fit for purpose
* Ensure The contractor maintains schedule for deliverables
* Ensure good internal discipline communication
* Maintain and developed awareness and responsibilities under Health and Safety Regulation
July 2003- Oct 2004
PT TOTAL E & P INDONESIE – PROJECT SUPPORT SERVICES (NDE)
FOR "PECIKO 4/EPSC 2"
Project: Pre-Fabrication, Erection jacket and platform SWP K, SWP E and modification piping platform (super duplex stainless steel, carbon steel, and Stainless Steel material)
Pre-Fabrication, Erection platform SWP-G, MWP-A, MWP-B and MWP-C project
(Onshore project)

Feb 2003-May 2003
CONOCOPHILLIPS-PROJECT SUPPORT SERVICES for "BBFE PROJECT
NATUNA SEA"
Project: Hook up Modification and Expansion Facilities Project for piping, mechanical, instrumentation & electrical installation for " Belida Lift Gas
Platform Expansion Project" (SIMOPS method offshore project)
Scope of Work:
* Provide Support and assistance to Construction team for preparation and review of document, procedures, and approved drawing
* Review the vendor documentation
* Material verification
* Generate responses to contractor design queries
* Ensure and asses all the above complies with company specification, design codes and is fit for purpose
* Ensure the contractor maintains schedule for deliverables
* Ensure good internal discipline communication
* Maintain and developed awareness and responsibilities under Health and Safety Regulation
March 2001-Feb 2003
PT. ISTANA KARANG LAUT, JAKARTA, INDONESIA
Mechanical and structural Engineer/ QA- QC Engineer/ Client
Representative and Expeditor
Project: fabrication, tie ins, hook up, and installation works for vessel, piping, skid system, package system and metering unit.
Scope of Work:
* Review Vendor drawings and documentation
* Recommend new techniques and Methods of working for greater efficiency
* Implement company policies and procedures
* Recommend improvements to Company Operating Procedures
* Liaise as necessary on Technical Matters with other engineering disciplines
* Provide support and assistance to construction team for preparation and review of document, Procedures, and Approved Drawing
* Perform Inspection activities as per company specification, code, and regulations government
* Generate responses to contractor design queries
* Ensure and Asses all the above complies with Company Specification, design codes and is fit for purpose
* Ensure The contractor maintains schedule for deliverables
* Ensure good internal discipline communication
* Maintain and developed awareness and responsibilities under Health and Safety Regulation

Project: Block "B" Facilities Expansion Project (BBFE) " BELIDA PLATFORM" for CONOCOPHILLIPS Indonesia
Fabrication for Refrigerant Package (300 Tons), Compressor Module (Roll Royce) package, and Piping Spools.

Project: Senoko Project For Singapore Natural Gas Resources Project Fabrication of Stainless Steel (diameter 30") piping spools (Power Piping pipe Class).

Project: Chemical Injection Package for Conoco Belanak FPSO Project
Fabrication of Structural Skid, piping spool and Installation Metering equipment.

Project: Block "B" Facilities Expansion Project (BBFE) "HANG TUAH PLATFORM" for CONOCOPHILLIPS Indonesia Fabrication for Refrigerant Package (300 Tons), and Piping Spools.

Project: PT. Jay Ray MC-Dermott Indonesia for BP West Java Project Fabrication and Installation for Utility/Instrument Gas Package including Instrument Gas Coalescer, Instrument Gas Dryer, and Production Separator Packages.

Project: Gulf Resources CO. LTD Project for Suban (Grissik) Fabrication for Suban Gas Fiscal Metering System (structural, piping and vessel work).

Project: Kufpec Indonesia LTD. For Seram Joint Operation (OSEIL Production Facility Phase I)
Fabrication for Vessels, Piping Spools, Skid Packages, pumps, Tanks, Boiler, Heat Exchangers, and Flares equipment for Phase I OSEIL Production Facility

Project: Total Tunu Phase 8 – EPSC 2 Project
Fabrication of Vessel (LP Flare KO Drum, FKP Open Drain Drum, And HP Flare KO Drum) and Piping Spool for Offshore Piling

Project: Three Phase Test Separator for State Oil Marketing Organization
(SOMO), Ministry Oil (Baghdad, Iraq for North Oil Company, Kirkuk Iraq)
Project
Fabrication for Skid Packages (skid, vessel and piping – 10 units)

Project: PT. Jay-Ray Mc Dermott for Unocal Thailand Project
Fabrication of B tex Recovery skid & Glycol Contactor for "UNOCAL THAILAND"

Project: UNOCAL INDONESIA- Di ethanol Amine CO2 Gas Removal System
Project
Fabrication for Heat Exchanger and vessel (still stripping Column, Amine Flash Tank, Outlet Gas Scrubber, Amine Contactor, Lean/Rich Amine Exchanger, Amine Still Re boiler, Amine Particle Filter, Amine Charcoal Filter, Inlet Gas Separator, Still Overhead Reflux accumulator, Condensate surge/ De aerator Drum), piping spool, and heaters.
1999-2001
PT. Mitsubishi Metal Fabrication, Cikarang, West Java – Indonesia
(U, U2 ASME Accredited Company, MOL, JIS Accredited Company)
Quality Control – Quality Assurance Engineer for Pressure vessel, Reactor, Heavy equipment, Prefabricated Piping used in Oil, Gas, chemical Plant, and Process Industry with major material Super alloy, Titanium, Stainless steel and Duplex Stainless Steel

1997 – 1999
PT. Truba Jurong Engineering, Paiton – Indonesia
QC/QA Inspector in Private Project Phase II Balance Of Plant (BOP) BOILER
Unit 5 & 6 (capacity 2 x 610 MW)
* Erection and construction for ' Boiler Unit 5 & 6 (capacity 2 x 610 MW) and structural work'
* Erection and construction for 'Civil, tanks and underground piping for water treatment area '
* Erection and construction for 'Balance of Plant (BOP) facilities including high pressure piping (Main steam piping, Hot reheat Piping, etc), Low pressure piping, and Fire fighting piping'
* Erection and construction for 'water treatment tank area and all mechanical installation works (pumps, condenser, pressure vessel and heat exchanger)

1995-1997
PT. Mekar Armada Jaya, Magelang – Indonesia
Staff Design and Construction of Product and Development

EDUCATION & CERTIFICATION:
------------
Bachelor degree majoring in Marine Engineering ITS
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 4754)

Go to Search Parameters...

Brief Description

OBJECTIVE: To secure a position with a company, long term, that will allow me to use my over 24 years of experience in construction to benefit the company fully.

I am a fully qualified and experienced Project Mechanical / Piping Designer capable of handling a project from initial concept to final handover utilizing current software, design codes and procedures being used in the Pharmaceutical / Chemical Industry.

Over 25 years of successful industrial construction management experience including projects exceeding $100M. Expertise and solid record of accomplishments in jump-starting stalled developments.

Summary of qualifications * Over thirty years of experience in design, engineering, and manufacturing of aerospace, military, marine, and commercial equipment with emphases on robotics and automation.

36 plus years as pipeline construction inspection/consultant.

25+ Years Experience, from managing to "hands-on". Commercial, industrial, institutional, manufacturing, health care, data centers, and petro-chemical installations, ranging in size from small $100m tent finish to $10MM prison, are all included in my past experience/projects.

INTERNATIONAL EXPERIENCE IN AFRICA,LATIN AMERICA AND RUSSIA-Experienced professional with above average communication and technical skills seeks mechanical maintenance position. Available now-single status.

Geotechnical or Port and Coastal engineering

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

Instrumentation Engineer with 3 years experience

B.Tech Petro chemical Engineering and Diploma in Industrial safety with 3 years Experience

Electrician

Materials expertise, inventory,issue and received handler

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

Architecture CAD Drafter

Experienced project manager in landscape sectors, 25 years practical management experience in commercial and residential fields including high-end, M.Sc. and B.Sc. horticulture, M.B.A. pending

Quantity Surveyor

Land Surveyor

Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha, South Africa doing Hydraulic maintenance. Have been doing all buying and selling and sourcing of goods over internet. Also went to site to do job estimations and Representative work. Did Offshore Survival course

Diploma in Civil Engineering,Civil QA/QC inspector

Mechanical engineer, qa qc engineer, construction engineer

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

In the last 18 years, I have directed activities and managed more than 36 long-and short-term projects valued at $200,000 to $20 million. My range of activities have spanned from staffing to contract negotiations to OSHA inspections to client interaction to project turnover and completion.

All phases of I&E project design, construction, commisioning and start-up with experience spanning 20+ years

I have over 13 years experience within various safety environments with varying responsibilities.

FABRICATION MANAGER with 34 years’ experience in Heavy Engineering Manufacture/Construction for the Oil&Gas/Petrochemical/Desalination/Power Generation industries (both onshore and off-shore markets in the UK/France/Italy/Poland/Netherlands/Mid-East/West Africa

Forty+ years – Design of Piping Systems and Plant Layout for Nuclear and Conventional Power Stations and Petrochemical Facilities. Of that time, approximately, 10 years of this time was spent in developing 3D area models and system drawings for various companies and projects.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Graduate With @.5 Yrs of Sales Experience

Electrical design engineer, lighting designer, single line diagram, fire alarm systems, cctv, site engineer, mep coordinator

Estimator in Interior Fit Out/ Buidling Construction

Resident technical officer

Wth 3 yrs of experience in HVAC and completed B.Tech.

PLC HMI Programmer

A Site Area Manager presently on an overseas assignment with over 25 years of experience, a broad background in site construction, project management and contract administration. Highly developed people skills, interfacing with vendors, clients, owners and virtually all project stake-holders.

project management\coordination-planner in primavera concepts

Completed bachelor of engineering in electrical and electronics from V.T.U,Belgaum.India.presently working as installation testing and commisioning engineer for ADWEAs DMS project with siemens ag from 25-02-07.before i was worked as a operation and maintenance engr for 110substain for K.S.E.B.

1+ years of experience in Ideas NX as a design Engineer

Subject : Applying for the Land Surveyor post

Safety Officer, Mechenical / Electrical, 10 years exp

I recently qualified as an architect from Robert Gordon University, and am keen to join your highly reputed and internationally successful organization. It has always been my interest to be a member of a highly motivated team engaged in the design processes of medium to large scale projects.

Autocad operator (HVAC)

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

ERP, Consultancy, Movex, HumanResources Implementation, Payroll Implementation, Managment, Consulting Services, Independent

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

Construction Manager / Superintendent /Commercial

Project Manager/ Superitendent/Estimator

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out