Resume - Has been working for an EPC company for eight (8) years with experience in handl...

Misco Jobs

Resume #87072

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:
FLUOR DANIEL ENGINEERS AND CONSTRUCTORS, LTD. (July 14, 2008 to August 13, 2009)
80 Robinson Road #02-00, Singapore 068898

CONTROL SYSTEMS DESIGN ENGINEER II
REC B&I Project – Renewable Energy Corporation – Tuas, Singapore
Actions / Responsibilities
Review and detail check field instrumentation deliverables, (Instrument specifications and datasheets, Bid Evaluation, Supplier Documents) and Construction Design Drawings in accordance to project requirements.
Involvement in Inter-disciplinary squad checking of either engineering or vendor documentation.
Assist the Lead Engineer in the preparation/planning of Engineering Punch list, Deliverables List, Control Schedule and Progress reporting to Project Controls.
Interface with Client, Supplier, Procurement and Expediting.
Review supplier documentation (i.e. Test reports) and conducts incoming and shop inspection for issueance of Inspection Release Certificates/Supplier Quality Surveillance to Suppliers.
Extending support to the Construction Team.
Duration
9 months

CB&I LUMMUS PTE. LTD. (April 2007 to July 13, 2008)
2 Ayer Rajah Crescent, Singapore 139935
MONTARA VENTURE FPSO (Vessel Conversion) – Coogee Resources – Jurong Shipyard
Function
Instrument Engineer
Actions / Responsibilities
Review and detail check field instrumentation deliverables from subcontractors, (Instrument specifications and datasheets, Bid Evaluation, Supplier Documents) and Construction Design Drawings in accordance to project requirements.
Attended Factory Acceptance Test (FAT) for the Cargo Ballast Control System.
Duration
4 months
PETROBRAS FPSO Project (Topside Modules) – Prosafe Production Services – Singapore
Function
Instrument Engineer
Actions / Responsibilities
Involved in the instrument design & engineering of Topside modules for Petrobras Generic FPSO.
Preparation of RFQ (Instrument Specifications, Data Sheets and Requisitions) for the following: Choke Valves, Shutdown Valves, Control Valves, Safety Relief Valves, HPU/WCR/TUTU; Electronic Transmitters, Gauges, Pig Signalers, Level Instruments and Orifice plates.
Initial Instrument Sizing for Control Valves and flow elements using InstruCalc.
Preparation of Bid Evaluation and Review of Vendor Documents
Interface/coordination work with Client and other discipline (Process, Mechanical Electrical, Piping and Civil/Structural)
Checking of Design Deliverables such as Hook-up, Cable Layout, Cable Schedule, Location Plans, MTO/BOM, Cable Block and Termination Diagrams.
Progress reporting
Duration
12 months
JGC SINGAPORE PTE. LTD. (Mar. 2006 to Mar. 2007)
International Business Park {One year assignment}
Singapore
SI Group Asia AP Project - SI Group – Jurong Island, Singapore
Function
Instrument Engineer
Actions / Responsibilities
Prepares Instrument engineering database (Index) taken from P&ID prior to the preparation of board and local Instrument Specification and other related engineering design outputs.
Responsible for the detailed engineering (field instruments) and procurement support (technical evaluation of vendor proposals and vendor document review for field instruments; recommends the most suitable/compliant vendor in accordance to project requirements, Licensors, codes and standards).
Initial Instrument Sizing for Control Valves and flow elements using InstruCalc.
Review of Vendor Documents
Interface/coordination work with other discipline (Process, Mechanical Electrical, Piping and Civil/Structural)
Duration
12 months
JGC PHILIPPINES, INC (Aug. 2001 to Mar. 2006)
Madrigal Business Park, Ayala-Alabang
Muntinlupa City, Philippines
Bapco LSDP and Revamp Project - Bapco – Bahrain
Function
Instrument Engineer II/Assistant Key Person
Actions / Responsibilities
Prepares Instrument engineering database (Index) taken from P&ID prior to the preparation of board and local Instrument Specification and other related engineering design outputs using Intools
Responsible for the detailed engineering (field instruments) and procurement support (technical evaluation of vendor proposals and vendor document review for field instruments; recommends the most suitable/compliant vendor in accordance to project requirements, Licensors, codes and standards).
Initial Instrument Sizing for Control Valves and flow elements using INtools.
Review of Vendor Documents
Prepares design information / requirements of Instrument to other discipline at the early stage of the engineering design.
Prepares I/O Function list, and Alarm set-point list
Prepares list of Instrument wiring and termination diagrams using INtools.
Prepares Instrument Electro-pneumatic/Impulse Tubing/Wiring hook-up drawing.
Prepares Bill of Materials and Bill of Quantity (MTO) based on Instrument layout drawings, detail installation drawings and material specifications.
Prepares Instrument Loop Diagrams using INtools.
Duration
21 months
Sohar Refinery Project - Sohar – Oman
Function
Instrument Engineer I
Actions / Responsibilities
Prepares Instrument engineering database (Index) taken from P&ID prior to the preparation of board and local Instrument Specification and other related engineering design outputs using Intools
Responsible for the detailed engineering (field instruments) and procurement support (technical evaluation of vendor proposals and vendor document review for field instruments; recommends the most suitable/compliant vendor in accordance to project requirements, Licensors, codes and standards).
Review of Vendor Documents
Prepares design information / requirements of Instrument to other discipline at the early stage of the engineering design.
Duration
12 months
Western Libya Gas Project – Libya
Function
Junior Instrument Engineer
Actions / Responsibilities
Prepares Instrument engineering database (Index) taken from P&ID prior to the preparation of board and local Instrument Specification and other related engineering design outputs using Intools
Responsible for the detailed engineering (field instruments) and procurement support (technical evaluation of vendor proposals and vendor document review for field instruments; recommends the most suitable/compliant vendor in accordance to project requirements, Licensors, codes and standards).
Review of Vendor Documents
Prepares design information / requirements of Instrument to other discipline at the early stage of the engineering design.
Prepares Instrument Loop Diagrams using INtools
Prepares Hook-Up Drawings using INtools/AutoCAD.
Duration
17 months
K2U Project- Map Ta Phut, Thailand
Function
Cadet Instrument Engineer
Actions / Responsibilities
Prepares detailed location layout/ plan of electronic and pneumatic field instruments based on information from P&ID, piping layout drawing.
Prepares routing layout of instrument main and branch cables, conduit pipes, air supply lines and pneumatic signals.
Duration
6 months
TOOLS / SOFTWARE EFFICIENCY

Smart Plant Instrumentation 2007; INtools (versions 6.0, 5.3, 5.2) (Instrument Index; Process data & Calculation; Specification; Wiring; Hook-up; Loop Drawing; Browser ; Spec Binder modules; Import Facility and System Administration module)
AutoCAD 2006
Microsoft Office (MS Word, MS Excel, MS PowerPoint and MS Access).
Lotus Notes; Microsoft Outlook
Adobe PDF Writer
Basic knowledge of PDS (Plant Design Systems-Equipment Modeling), Microstation and Smart Plant viewer.
InfoMaker ver. 7

TRAINING
Smart Plant 3D Enterprise (Overview) by Intergraph
Smart Plant Instrumentation Training (June 2007)
ACONEX (Web-based Project Documentation)
Safety Induction Training

NON-TECHNICAL SUPPORT JOBS
Internal Quality Auditor for Control Systems
Organize Company Wide Events/Trainings for Knowledge Management.
Training Coordinator

EDUCATION
Degree in Bachelor of Science in Chemical Engineering
University of Santo Tomas - Manila
(1994-1999)

PERSONAL DATA
Age: 32
Marital Status: Married
Citizenship: Filipino
Religion: Catholic

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 4812)

Go to Search Parameters...

Brief Description

Proficient in Document Management System & Secretarial Functions

Mechanical Engineer with 3 years of experience in electrical instalations

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Reviewing the scope of work & technical specifications, checking detail projects schedule plan for construction and delivery of equipment, analyzing the projects progress and monitor the site progress and look after the safety and quality issues and more.

A 34 year old project manager with 14 years experience in mechanical, industrial and commercial projects. 15 years experience in all realms of contract engineering & QA/QC. Overseeing projects up to 36 million dollars. Project estimations.

Experience in Construction of Power House, Highway Roads, High-rise Buildings, Canals, Air Ports, Aero Bridge ,Delhi Metro Rail, Commercial and Residential Multi Story Buildings ,Water Tank, Guest House , Domes. Familiar with ISO 9001,ISO 14001 and Safety systems.

30 year old dynamic electrical power systems engineer available for immediate relocation.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Heavy Equipment Operator

I am looking to get on the job training to become a construction project Manager, I believe once trained I will make an outstanding Manager

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

I have 28 years experience in finance, project control, scheduling and material control working on DoD projects and private sector manufacturing companies in and out of the U.S.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Microsoft project, scheduling, budgeting, estimating, superintendent background

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Iam a diploma holder in Mechanical engineering with knowledge in autocad, Pro-e. Working as supervisor , engaged in fabrication & erection of pipelines.

Training and Supervision of Technicians, Quality Control, Sudying Chemical Engineering - Dipolma level, Soil, Asphalt and Concrete Testing (Lab and Field)

Certified Project Management Professional (PMP from PMI, USA) has extensive experience in technical, commercial and quality management aspects of the construction projects.

Diploma of associate engineer

Diploma Civil Engineering

AutoCAD Operator

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

I was graduated in Bachelor of Science in Mechanical Engineering and my work experiences was in the field of QA/QC in construction of district cooling plant with two years in refinery construction and currently working as a Mechanical Inspector in a consulting firm.

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Mr. Papanna has more than 5 years diversified engineering experience in the process, petrochemical and power industries. These duties included developing specifications and requisitioning equipment, performing technical evaluations and making recommendations for purchase, and specifying all testing

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Monitoring and Scheduling the Projects

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.

PLANNING , MOETHODS MAINTENANCE ENGINEER

Qualification : Diploma in Civil Engineering, Professional Skills : Planning & execution of works as per the drawings & client/company’s requirement. Quantity Surveying, Billing, Man Management, Material Procurement, Labour control & over all Supervision of work.

Health & Safety Inspections (OSHA, MSDS)

15 Years experience in Construction and Mining. Qualified Diesel Mechanic with Supervisor and Foreman skills.

Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc

Fresh Graduate Quantity Surveyor

I am a self motivated industrious candidate and also a fresh graduate from Sheffield Hallam University and graduate with the course of (Bsc. Hon) Building Construction Management, I¡¯m seeking for job placement with the post of Project Executive.

Pipe design, P&IDs and autocad

Experienced domestic and international project manager. Well versed in project management and cost management best practices coupled with delivering successful project and software implementations.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out