Resume - ISO/ASNT certified Vibration analyst ,More than three years of engineering exper...

Misco Jobs

Resume #87105

CONTACT INFORMATION:
View contact information...

A talented Mechanical Engineer with experience in Condition based maintenance and Vibration analysis. looking to improve my skills and my experience in an international organization

Summary
******
-ISO/ASNT certified Vibration analyst
-More than three years of engineering experience.
-Analytical skills and self learning ability.
-committed to any work unconditionally.
-Able to work under pressure.
-Able to liaison between technical groups.
-Proven ability to improve efficiency.
-Hard working and detail oriented.

PROFESSIONAL EXPERIENCE
***********************

Arab Swiss Engineering Co. ASEC, Cairo, Egypt June 2007 – Present
Condition Based Maintenance (CBM) Engineer.
"Vibration Analyst" ISO/ASNT Certified

-Collect data and analyze vibration signature using all analysis techniques such as Cross Phase analysis, ODS, Run up and Cost down tests, Bump test, Peakvue …etc. to detect and diagnose any problem before it leads to failure in several cement manufacturing plant such Helwan, NCC, Sinai and Masr Bani Swif plants.
-Using CSI analyzers 2120 and 2130 Pro Consultant and its software "AMS".
-Correct mechanical unbalance problem by applying in-filed balance jobs "multi plan and multi speed" using different balance techniques such as "static-couple balance" and flash angle "one shot balancing".
-Writing monthly technical reports about the machinery health with clear explanations and professional recommendations and supervise applying these recommendations.
-Built up a data base for the equipments and select the equipments which go into the route.
-Built up proper case studies.
-Measuring and diagnosing faults of Bearings, Gearboxes, Electric Motors, Air Blowers, Fans, Air Compressors, centrifugal pumps, piston pumps.

Egyptian Engineering Co., EEC, Cairo, Egypt November 2006 – May 2007
Site/Office Mechanical Engineer

-Mange the operation of building water treatment stations, job involved designing and mechanical drawing skills.
-Designed water treatment units and stations and select the layout of these stations

--------------------------Total years of Experience: 3 years-----------------------------

EDUCATION
*********

Helwan University, Cairo, Egypt
B.S.C in power Mechanical Engineering, 2001- 2006 Grade Good
Graduation project Studying the performance of centrifugal compressor at variable speed.
Grade Excellent

Mobius Institute, Victoria, Australia
Vibration Analyst ISO/ASNT certificate Category II May 2009
Certificate Number 080704

TECHNICAL SKILLS
****************

MS Windows (98, 2000, xp and vista), AutoCAD, Swish, MS Office, Machinery Health Manger "AMS"

LANGUAGES
*********

Arabic Mother tongue
English Very Good "writing, speaking and understanding"

ADVANCED TRAINING
*****************

-Mobius Institute – Natcom –Advanced vibration training III - 2009
-Mobius Institute – Natcom –Intermediate vibration training II - 2009
-SKF - Vibration Analysis and condition monitoring level 2 - 2007
-TCC Technology Competency Center - Operating and maintenance of pumps - 2006
-TCC Technology Competency Center - Hydraulic & Electro hydraulic system - 2006
-Suez Oil Processing Company- Summer training - 2005
-Egypt Air Company – Summer training - 2004

PERSONAL INFORMATION
********************

Date of birth October 21st 1984.
Nationality Egyptian.
Marital Status Single.
Military Service Exempted.

Keywords: Mechanical Engineer, Condition based maintenance engineer, Vibration analyst, Design Engineer
Certificate online reference: http://www.mobiusinstitute.com/mi/CategoryIIStudents.html
Last update: 22nd July 2009

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3301 to 3350 of 4806)

Go to Search Parameters...

Brief Description

Quality Control professional

Safety Technician

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Architectural Technologist student seeking summer employment Some construction experience good AUTOCAD skills

Mechanical engineering professional in post-contract administration and expedition. Legal, project, and expediting experience in Europe and the Far East in plant, marine, and, offshore projects.

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Project Management, Supply Chain Management, Human Resources Management

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

Site Controller / Accountant <<< Cost Controller

Senior Geoenvironmental Engineer (Contaminated Land, Geotechnical) with over 5 years UK experience

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Electrical Engineer and Computer Sciencer

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Residing in Kuwait for over 12 years, Excellent 8+ years of experience with US Forces operated in Kuwait, Iraq and Afghanistan. Highly competent contracts administrator with extensive experience administering multi-million-dollar contracts for major projects in the GCC & Middle East.

Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in work

Multi-skilled engineer

8 years of professional experience in Administration and personal assistance.

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

I am a qualified and experienced Medic or Paramedic and have vast HSE/Safety/OHS/QHSE experience and qualifications. I am also a qualified rescue technician and am very well versed in emergency co-ordinating.

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

I am working as welding inspector in oceanreeng ois project Ras Gas. And befor date of 28 april 2007 working with EIL project Burj Dubai Development & GRAVITY BASE STRUCTER IN DUBAI DRY DOCKS.

Civil/Structural/ Architectural Designer with extensive knowledge of petrochemical and oil and gas industry. Expertise in 3d Bentley Structural and knowledgeable in Staad Pro

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Material Controller/ Expeditor

Mechanical Engineer, technical support

Eco-friendly Architect, Revit, Autocad, 3D max, SketchUp, Photoshop, Flash, Coral-draw, Illustrator, Rhino3D.

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Oil & Gas Exploration Project Manager - Spring Creek, Nevada resident - Forest Service, BLM , Tribal, State & Federal liason experience

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Sales, Engineering Project Manager

12 Years of experience in the Project Management, Planning, Controlling, Production and Material Management

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

I am Mechanical engineering graduate with 18 years of experience with the Project Management & execution, Procurement & Contract Management. Executed Tendering, Commercial Evaluation, Negotiation, and Contract Administration for mega projects in Hydrocarbon and Oil & Gas sector. Involved in Concept

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

Project Manager, Field Engineer, Commissioning Electrical Switchgear

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

Mechanical Engineer having 8 years experience in Petrochemical, Oil&Gas sector as Project Planning Engineer, looking for suitable position with family staus

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Applying for the post of safety officer in your esteemed concern

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Purchaing, Procurment, Supply Chain Management, Materails, Inventory

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 [ 67 ] 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out