Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87116 next resume »»
CONTACT INFORMATION:
View contact information...

Summary:
I have 27 years experience in service and management in HVAC and refrigeration systems, lighting, microprocessor environmental equipment and technical supervision. Additionally I am familiar with OSHA
standards, hazardous waste storage and digital system controllers and am computer literate.

Licenses:
Master Mechanical Licenses- Georgia (CN209068), Virginia (2710 051232),
South Carolina (MG 353)
3rd Class operating Engineer- Maryland and Washington D.C.
Master Gasfitter- Washington D.C., Maryland, Georgia, Virginia and South
Carolina

2005-2009
Facility Systems Service, Inc.
7744 Kelly Avenue
Gloucester, VA 23061

Owner & President
Installation and servicing of a wide range of building systems including parallel refrigeration systems, automated building controls, lighting, HVAC & energy recovery. Dispatched service technicians, negotiated contracts, trained and supervised employees.

2004-2005 Parallel Refrigeration Inc.
7535 NW 32nd Avenue
Miami, Florida 33147

Service Manager
Supervisor; Jose Valero (owner)
Responsible for all aspects of the branch service dept. including technician training,ordering parts and materials, negotiating contracts and bottom line P&L. Supervised all service technicians, assigned task, trained employees. Also tracked vehicle maintenance and material procurement.

2003-2004 Sheraton Suites Key West
1800 Roosevelt Blvd
Key West, FL 33147
Chief Engineer
Responsible for total maintenance & mechanical operation of hotel, including HVAC, refrigeration, guest room service, and grounds maintenance.

2001-2003 Industrial Building Service, Inc.
3511 Northeast 22nd Avenue., Suite 300
Fort Lauderdale, FL 33308
North Miami Branch Manager
Supervisor; John Oney, Director of Operations
954-448-2650/1-800-333-4001
Responsible for all aspects of the North Miami branch office including technician training, ordering parts and materials, negotiating contracts and bottom line P & L which generated 1 million + per year.

1994-2001 Facility System Services, Inc.
999 Crestmark Blvd., Suite 112
Lithia Springs, GA 30122
Owner & President
Installation and servicing of a wide range of building systems including parallel refrigeration systems, automated building controls, lighting,
HVAC & energy recovery. Factory training & certification in CPC, Novar,
Encore Process Controllers

1992-1994 Bay Area Refrigeration
202 Webster Street
Hampton, VA 23669
Owner & Service Technician
Maintained commercial refrigeration & air conditioning systems ranging in sizes from 1/8 HP through
20 HP. Trained other technicians in the storage & handling of hazardous materials according to OSHA and the VDOT guidelines.

1990-1992 Multiple Listing Network
Charleston, SC
Real Estate Salesman
Assisted in the acquisition and sales of existing businesses through extensive evaluation and interpersonal contact with owners and prospective buyers. Evaluated fair market values for the purpose of negotiating sales contracts.

1984-1989 Commercial Mechanical of Maryland, Inc.
Rockville, MD
Owner
Installation & servicing of commercial building systems & equipment as well as pneumatic, low voltage, & microprocessor controlled environmental equipment, VAV and chilled water.

1981-1984 Alvin L. Aubino, Inc.
Bethesda, MD
Assistant Chief Engineer
Maintained and operated low pressure steam and hot water physical plants, trained journeymen level technicians in system operations and repairs.
Other duties consisted of all aspects of building service as well as material procurement, task assignments and interfacing with contractors.

Technical School
1980-1981 QBIC Engineering - Bethesda, MD
Operating Engineers license for Boiler Operation and Building systems, installation and service, water treatment, drafting and schematics.

1980-1981 Baltimore Gas & Electric (Master Gas Fitter) - Baltimore, MD

References supplied upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1551 to 1600 of 4806)Go to Search Parameters...
Brief Description
Tendering & Proposals, Estimation, Project Planning, Quantity Surveying
Mining Engineer / Project / Operations Manager
I have completed B.Tech in the field of Electrical Electronics Engineering at 2009 and I also completed Diploma in the same field at 2005. I have a year Experience in Government Electricity Department at 2005-2006 in Puducherry, India. I attached my CV for your kind considerat
Have a vast professional experience in road construction; Can handle high pressure with ease and open mind • have handled various critical and challenging projects from design stage to implementation stage and ensured that the projects gets implemented as per specification in stipulated time with
Experienced safety professional and proven leader in the Environmental Health & Safety environment. I've developed and successfully implemented several innovative injury prevention programs which has resulted in millions of dollars saved in Workers' Compensation expenditures.
Ironworker, sheetmetal mechanic
I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.
Project Construction Manager (Fabrication, installation, Offshore Hook-up)
Process Engineer - Oil&Gas - Sulphur - Refinery
Asphalt Plant Manager/Foreman 38 years in asphalt production field
AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE
My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.
Engineering, cadd designer, autocad, microstation
Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.
project in erection, maintenance and up gradation project of 40 MW power station and
Over 16 years of experience in leadership roles within complex operations, supervising diverse teams and managing challenging programs/assignments within U.S and international locations
Highway Laboratory / QC Manager with 25 years experience in materials
I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.
Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I
Contract working, supervision of dam construction, geological worlks etc.
Electrician and editor of substation
Seeking a position in management with the opportunity for further career advancement through using sound judgment and personal performance. Will consider a staff position with opportunity for advancement.
BS biomedical engineering, looking for a job where i can use my knowledge and skills to overcome the problems.
I have done the project for International Power name "Feasibility of Electrical Energy Saving at HUB POWER station. and I can design different kinds s controlling circuits by using microcontroller,PLC and VFD.
A position of significant responsibility that builds upon extensive experience in construction management, expertise in managerial skills and cost analysis. Ultimate goal is to grow within and with the progressive organization that provides excellent career advancement opportunity
5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines
I AM A LAND SURVEYOR WITH CERTIFICATE QUALIFICATION.I HAVE 8 YEARS WORKING EXPERIANCES AS A LAND SURVEYOR IN CONSTRUCTION AND TITLE WORK IN MALAYSIA AND OVERSEA.
Repair & maintenance of plant & equipments used in construction, knowledge in overhauling of engines used in construction equipment, maintaining & preparing all technical reports related to plant
journeyman lineman service, const, underground cdl cpr overhead switching
I am a university-educated Canadian Registered Safety Professional with over 15 years of Environment, Health and Safety experience. This experience has included the development and implementation of EHS management systems, training programs, risk assessments and emergency response plans.
I have worked and performed 2 (two) years as HSE (Health Safety & Environment) in construction which one year in oil & gas project (pipeline and gas plant) and one year in civil package, erection in reconstruction cement plant project.
Over twenty-five years experience in Project/Construction Management in an Engineering Procurement and Construction Management environment, specializing in Project Controls, Planning and Scheduling. Project Controls background includes EP, EPC and EPCM.
Diploma in Mechanical/materials management with 17 Years expereice in Material Controlling and Piping looking for employment with reputed organisations.
QA/QC Supervisor, Welding Inspector
I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.
Electro-mechanical overhead crane repairman
Estimating,Quantity Surveying, Project Planning & Project Management
MILLWRIGHT Detailed oriented Gold and Red Seal (V1984) experienced Journeyman Millwright Foreman with experience in construction and petrochemical plant environments.
extensive experience in the field of pre-cast concrete products
Piping Designer PDS CAD
I am capable to handle Administration, Partner with HR, Security, Procurement, Vendor Management, Liaison and other assigned work given by the Management.
12 years of experience working in the oil and gas industry for production, service and engineering companies as planner/scheduler, cost controller, service planner. Experienced in scheduling and cost control procedures, data collection/entry/processing and analysis, data base maintenance, used speci
Rigger, works well at height
Basic education:College of Business Administrartion, Secondary ed. of engineering. Advanced sch: WTA ind.eng.; ISO Quality systems; Turu col of econ. int.marketing; Different schooling in marketing/sales. Lang.: ENG;RUS;FIN; EST. PC-MS Office; MS Project;ind.controllers user interf. Driv.Lic ABCE
I am a senior attending California Polytechnic University, Pomona, and I will be completing my Bachelor’s degree in Mechanical Engineering, along with a Minor in Materials Engineering Sciences, in the fall of 2009. I am currently seeking an internship or entry level position.
Mechanical Master, Master Gasfitter
Dynamic, highly adaptive professional offering 20+ years’ experience.
Electrical
Technical /Project Engineer
Electrical Engineer in profession, Knowledge in instrumentation and control, Design and trouble shoot's motor control, can do hard wirings,
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   [ 32 ]   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com