Resume - Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Tec...

Misco Jobs

Resume #87438

CONTACT INFORMATION:
View contact information...

Career Highlights
Highly recruited Road Warrior 2006-2008
Advanced Leadership skills for training in the Industry
Senior level Diesel mechanic, Service Manager, Shop Foreman

EXPERIENCE
Recruited by Freeport from Wyoming Machinery
Freeport McMoran: Morenci,AZ (Aug 2008 to Mar 2009) Diagnostic Diesel Mechanic
Heavy CAT specific mechanic, Responsible for repair and maintenance of heavy haul fleet of 789B, and 789 water truck, 793B,C,& D series. Along with the heavy earth moving support include but not limited to D11,D10N,R,&T, Graders 16H & 24Hseries.etc. As a journeyman mechanic it is also our responsibility to train and teach the Repairmen, Apprentices, and Interns the skills they need. Reduction in Work Force caused 2500 miners to lose their jobs in one day.

Wyoming Machinery: Gillette,WY( Feb 2008 to May 2008)
CAT field mechanic on heavy mine hull and support equipment. Equipment that I worked with mostly CAT D10R, 954F, 690C Tiger, 375C excavators, 793 B,&C, 797B heavy haul, 631,and 657G scrapers. Graders 140H,M, 16H 24H,Mseries.Boom and Shipper shaft repair and removal on the 4100B shovels. Also worked on the Kamatsu 980E, Liebeber T282B, Payhauler electric hauls. After only three months had the second home that I was renting in WY sold out from under my family. I decided to resign due to the housing issues in the state and return to the southwest.

Hettinger Welding: Gillette WY ( Oct2007 to Feb2008)
Recruited by Hettinger Welding from Red Mountain Machinery
Contracted mechanic to maintain remote fleet in SW WY. Responsibilities included bringing company into DOT compliance, maintain accurate unit inspection and repair reports. Maintain approx 200 pieces of heavy CAT and Kamatsu earth moving equipment in the gas fields in a 150mile radius. Equipment ranged 657G scrapers, D10R blades, 16H graders,PC200-6/7,PC300-5,6,7 series excavators

Red Mountain Machinery: Las Vegas NV(Jan 2007 to Oct2007) HEAVY EQUIPMENT FIELD MECHANIC
Recruited from Pennsylvania to work as a CAT specific field mechanic for a multi-state company. Company keeps all mechanics at CAT mechanic level of training by having its own training center with certified CAT trainers. Job responsibilities are that of any field mechanic in a vast rental fleet. Working without supervision repair equipment to almost as new standards to maintain a peak equipment performance. Responsible for ordering our own parts through internet patch. Quality Control inspector for all equipment to ensure that all repairs were completed correctly. Housing bust hours cut to 32 a week.

Cavan Concrete Construction Inc. Aston, PA (Feb 2006 to Jan 2007)SUPERVISOR/ROAD MECHANIC
Responsibilities include but not limited to ordering and tracking of purchase orders for parts for equipment repair. Maintain DOT logs and all PENDOT inspections for a fleet of over 130 trucks and Heavy equipment. Implemented the change of ordering parts would be charged to each piece of equipment instead of being charged to stock. With the use of the Tool Watch software maintained a strict maintenance schedule on all equipment and company vehicles. Supervise, Advise and Assign work to mechanics in shop and dispatch Road mechanic as needed to any problems in field. Answer foreman questions with machine problems and schedule in shop repairs as needed to limit loss of work time.

William Carpenter and Sons: Telford, PA (Oct 2002 to Feb 2006) HEAVY EQUIPMENT FIELD MECHANIC
Field mechanic for stone quarry and heavy site dirt and paving operations for a medium size operation. Equipment includes but not limited to R-35's, R-45's and Kamatsu 320-6 Haul Trucks. Loaders include but not limited to VME L190,320, 330 series, and Kamatsu 250, 450 series. Track machines include PC 150 -4/5, PC200-6/8, PC 300-6, D-66 track loaders, Dozer include D-32, 37,39. 65 165XP.Pavers Cedar Raids, Cat, Roadtecs. Duties include but not limited to the trouble shoot and repair of the above equipment and include class 8 vehicles. Duties also include the fabrication and welding of frames, blades, and buckets.
Clayton H. Lands Inc: Souderton, PA (Apr 2001 to Jul 2002) MECHANIC/WELDER
Heavy industrial machinery repair and fabrication. Wrote inventory spreadsheet to track parts easier and more cost efficiently. Duties also include fabrication, grinding, welding and finish work. Field installation and repair of equipment. Working with minimum supervision, tear down and reassemble to original equipment manufacturer (OEM) or new engineering standards. Operate 60- ton bridge crane.
Sunbelt Rentals: Swedesboro, NJ (Oct 2000 to Mar 2001) - SHOP FOREMAN/SERVICE MANAGER
Maintain the availability of $7.5 million fleet. Assign jobs to 5 mechanics and dispatch one road mechanic. Evaluate service reports, order repair parts and bill customers for damage to rental equipment as needed. Provide hands on and technical support to mechanics in needed areas. File and follow all warranty claims against vendors.. Answer customer complaints and problems. Troubleshoot diagnosis and repair equipment from electrical problems to catastrophic engine failure. Make sure that equipment needed for the next day was ready for customer rentals

L.B. Smith, Inc: Plymouth Meeting, PA (Jun1999 to Apr2000) PRODUCT SUPPORT SPECIALIST
Research and order parts from stock or factory as required by service technicians and outside customers. Provide technical support to customers for heavy equipment repair including cranes, skid steers and backhoes. Assist in completing parts shipments to remote customers via Federal Express and United Parcel Service.
K&M Gravel/Construction: Leroy,MI (Aug1990 to Aug1995) Field Mechanic
Started with now closed gravel quarry and heavy road construction as a helper on the conveyor and Cone crusher. To become shift lead mechanic.

EDUCATION
DELAWARE COUNTY COMMUNITY COLLEGE, Media, PA
Courses in Welding, 2001
FERRIS STATE UNIVERSITY, Big Rapids, MI Pursuit of B.S., Training in Business & Industry, 1999 Associates in Heavy Equipment Technology, May, 1998

CERTIFICATIONs
MAC
Sect46 MSHA
Adult CPR
Confined Space
Advanced First Aid

ACHIEVEMENTS
VICA advisor, 6 Month(s) Experience
VICA advisor to Heavy Equipment Diesel program will still a senior in college. Under my guidance and encouragement, led a student to place second in national VICA skill finals.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 4757)

Go to Search Parameters...

Brief Description

Safety Manager seeking position

Crane Operator

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Experienced in power plant operations and startup.

international c.v.

Mining Engineer and Geologist with twenty-seven years’ experience in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and engineering achievements. Advanced technical and strong supervisory skills.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

I have been working in construction industry for Oil & Petrochemical Plant for decades. I work well under pressure and very keen on project planning and management. I am confident in leading a team of sub-contractors in performing sophisticatedly for any petrochemical processing plant.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Looking for a new challenge at the end of 2003 my present contract end then

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Erection, Commissioning field instruments & Systems

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

Ex-Pat experience in international Supply Chain, Logistics, Process, and Project Management

Diploma general nursing (midwifery,community nursing,psychiatry),Diploma in occupational health nursing,SAMTRAC

Safety or hse officer,4.5yrs exp

Document Controller, Planning Assistant, Admin Assistant

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.

I can offer extensive supervisory experience in the oil and gas industry,

Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi

Over 25 years of diverse and successful experience in material control in areas including: Nuclear/Coal Power Generation, Bulk Handling & Storage, Co-generation, Commercial Maintenance, Oil Refinery, Warehouse/Distribution, Shutdown/Turnaround and Outages.

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

Geodesist/Land Surveyor/Geomatics/GIS consultant

Project Manager with over 35 years of experience in the construction industry, which offers an extensive and diversified array of industries such as power generation, pharmaceutical, semiconductor, large office facilities, pulp/paper and plastic projects, coal gasification and others.

Highly motivated and results-oriented professional with exceptional leadership and interpersonal skills with an extensive background in construction industry.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

Piping/Mechanical Superintendent

System Admin for IT Industry.

RESIDENT CONSTRUCTION MANAGER / SUBCONTRACTS MANAGER / CONSULTANT IN CONSTRUCTION OF PETROCHEMICAL PLANTS (SPECIFICALLY HYDROGEN /SYNGAS REFORMERS, ETHYLENE CRACKING FURNACES, PETROCHEMICAL UNITS INCLUDING DETAIL PLANNING AND EXECUTION OF SEVERAL PLANT TURNAROUNDS PROJECTS)

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

I am currently on another project but can leave with a two week notice.

I have been supervising and managing Building projects for the past 20 years With great success. I am not only a man Who is a supervisor but I have journeyman Level skills at most of the major trades, This allows me to insure proper quality.

results oriented, hands on, Construction Management person with 20+ yrs experience in various facets of the industry specializing in Industrial, Mining Construction. Prefers international or remote work location.

Have been in construction for 35 years

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field. Skilled in all types of mechanical work- hydraulic, pneumatic, conveying systems

Award winning Project Manager / Facilities Engineer.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

Extensive background in the planning and profitable management of large scale projects/ programs in support of multi-million dollar business operations.

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Power Generation- Twenty-eight years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems as Lead Mechanical, Lead I&C, Lead Operations and Startup Plant Manager.

I am looking for a full time work, anywhere

Twenty-five years experience in the construction/consulting sector.

I have a total of 20 years in heavy construction Safety

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out