Resume - 2 Years of Experience, Heavy Equipment Certified, CDL CLass A, OSHA 10HR/30HR, C...

Misco Jobs

Resume #87478

CONTACT INFORMATION:
View contact information...

Ttwo years experience in utility construction and have taken steps toward improving my expertise.
I have recently completed a Heavy Equipment Operators training, where I
received certification on Loaders (Tractor Loader/Backhoe; Articulating
Wheel, Skid Steer), Backhoes, Excavators (Mini & Standard), and
Bulldozers. Additionally I completed my Class A CDL course on Sep 11,
2009, albeit, while I was in Cameroon I drove semi-tractor and flt bed trailers for the 2.5 years I was there.
In addition to these formalized equipment courses I am actively enrolled in two on-line programs: 1) Construction Management, Associates of
Science and 2) 10-hour/30-hour Construction OSHA course. I believe these courses combined with my other certifications and experience will make me a valuable employee to your esteemed organization.
My experience was in working in a very difficult environment of two metropolitan areas in Cameroon (Africa). This project entailed the rightof-
ways, asphalt/concrete cutting, trenching, pipe placement/joining,
UCV placement, and fibre optic placement/joining. While I understand that this was telecommunications focused project, we had to overcome the same obstacles of construction faced with any underground access
(existing facilities, right-of-ways, traffic management, inspections, safety, restoration, etc.). Additionally, I was in charge of teams of 34+ people, a mixture of Western Expats and local Cameroonians of varying levels of skill.
Added to the complexity, was that Cameroon is a French speaking country.
I believe that my experience and diversity of skills will help your company in its on-going and future projects and would enjoy an opportunity to sit down and further discuss how I can compliment your staff. I look forward to hearing from you in the near future to arrange an interview.

Objective
To obtain a mid-level position as either a Project Engineer or Heavy
Equipment Operator with your esteemed organization.
Certifications Heavy Equipment Operator, 564 hour course, National Training Inc.,
Orange Park Florida 32065. Certified on Bulldozer, Tractor
Loader/Backhoe, Articulating Wheel Loader, Skid Steer Loader, and
Standard & Mini-Excavators. DOT License No. U081697799; Graduated
08/21/2009 with grade point average of 92.3%, Equipment training scores: Safety 200 out of 200, Pre-Op equipment 100 out of 100, and
Operator Skills 299 out of 300. Trained on:
 Equipment Safety and OSHA
 Equipment operations and appropriate maintenance
 Lubricants and lubricating equipment
 Preventative Maintenance
 Loading and unloading equipment off of lowboy trailers.
 Pipe installation
 Construction drawings
 Maps and map reading
 GPS
 Surveying
 Laser operations
 Soils, soil testing, & compaction
 Working in muddy and cold weather
 Land clearing and dewatering
 Trenching
 Roadways
 Quarry Operations
 Demotion
 Septic Tanks and Basements
 Pond and Reservoir Construction
 Landscaping, planning, and methods
Commercial Truck Driver (CDL) License, National Training Inc., Orange
Park Florida 32065. Florida Class A CDL R356-292-84-207-0. Trained on:
 Principles of Diesel Engines, cooling systems, fuel, electrical systems, air supply and exhaust, transmissions and differentials, tires and wheels
 Inspections
 Coupling and uncoupling
 Backing maneuvers
 Shifting
 Braking
 Load securing
 Drivers Logs
10-hour and 30-hour Construction OSHA certification, currently enrolled in on-line course through Safetytrainingonline.com

Education
06/2009 – 08/2010 San Joaquin College
Visalia California 93277
Construction Management, Associates of Science
Online course
 Construction Management program provides the technical and managerial skills for commercial and residential construction industry.
Students are prepared for the management responsibilities they will face on the job, creating an opportunity to move into supervision and construction management, learning:
 Architectural design theory
 Construction methods
 Construction communication procedures
 Industry software
 Industry laws & regulations
 Estimating & bidding for residential and commercial projects
 Scheduling & control of a project
 Competitive business presentations
 Methods of field supervision
 Technical writing, algebra & geometry
08/2005 – 12/2006 Florida Gulf Coast University
Ft Myers, Florida
 Played Baseball
 General course materials
08/2004 – 06/2005 Pasco Hernando Community College
New Port Richey, Florida
 Played Baseball
 General course materials
08/2003 – 06/2004 Seminole State College
Seminole, Oklahoma
 Played Baseball
 General course materials
08/2005 – 05/2003 Countryside High School
Clearwater, Florida
 Played Baseball
 General course materials
 Drafted by Florida Marlins out of high school as a 'Draft to Follow' and recommended to attend Seminole State College in Seminole
Oklahoma as family was relocating to Oklahoma
Professional experience
Jan 2007 – Jun 2009 Beraiah Construction Services/Unicorn
Communications Inc.
Bartlesville Oklahoma 74003
Project Engineer, Heavy Equipment Operator, & Truck Driver
Bill Oldright was the Project Director for this project. This project was for
MTN Cameroon and was a fiber optic outside plant build program to connect their mobile base stations together within these two metro locations. Job site locations: Douala & Yaoundé Cameroon (Africa) –
project completed
 Execution and Supervision of the daily operations of various construction teams
 Crews consisted of: (2) Trenching Operators, (1) Skid Steer

Operator, (2) Excavator Operators, (1) Dump Truck Driver, (1)
Utility Locator, (3) General Purpose Drivers, (24) General
Purpose Construction Laborers (Traffic Control, Trench Cleanout,
Manual digging, pipe laying & joining, trench shoring, concrete pouring, etc.)
 Crews were a mixture of US Citizens and local Cameroonians
 Conduct daily safety briefing
 Construction print reading and red-lining
 Maintain site daily log book
 Call for and accept site materials
 Conduct and or observe daily equipment inspections
 Ensure site fuel deliveries
 Maintain project schedule
 Driving of Semi-tractor trailer (flat bed) for movement of heavy equipment and materials from and to job sites
 Conduct site surveys for pre-engineering
 Conduct route surveys for development of pre-engineering drawings, inclusive of:
 Use of data collectors
 Use of theodolites and poles for survey
 Use of measuring wheels
 Mark route based on final engineering drawings with mixture of route stakes or paint markers (utilizing the appropriate colors for pathway)
 Assisted in meeting with roads engineers for obtaining rights-ofways within public right-of-ways in local communities and along federal highways
 Cutting and restoration of roadways (asphalt, Chip & Seal, concrete)
for utility infrastructure placement
 Use of Ditch Witch Street Saws
 Use of Walk behind Concrete Saws
 Use of Bobcat Skid-Steer Loader attached street saws
 Trench compactor (plate and rollers)
 Trenching of roadbed and pedestrian-ways up to 2-meters (6.7-feet)
for placement of 4-inch Schedule 40 PVC pipe
 Use of mini-excavators
 Use of Ditch Witch/Vermeer Trenchers
 Use of manual labor
 Use of Skid-Steer Loader
 Potholing via high-pressure water and vacuum system (Ditch
Witch FX60)
 Soil types: Red Clay, Type 1 soils predominantly
 Placement of ducting system under railroads, bridge attachments, under small rivers/streams
 Use of horizontal directional boring, mud mixers, and vacuum systems
 Use of scissors lifts
 Placement of 4-inch Schedule 40 NEMA-2 PVC pipe (placement, joining, verification)
 Pipe lasers for verification of elevation pitch
 Concrete encasement of piping

 Excavation for and Placement of pre-cast underground cable vaults
(UCVs) at appropriate locations
 Mini-Excavators
 Front End loader
 20,000# Fork Lift
 Placement of #4 pea-gravel bed for pipe and UCV
 Skid steer loader
 Trench compactors (roller)
 Placement and joining of (4) 1.5-inch SDR-13 HDPE NEMA-7 innerducts within 4-inch PVC duct
 Placement, splicing, and termination of ITU-T G.652 36-strand single-mode fiber (double jacket-single armor) via blown fiber method
Aug 2005 – Dec 2006 Various
Ft Myers Florida
Club Bouncer, Concert Security, Restaurant Support

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 4812)

Go to Search Parameters...

Brief Description

I am a construction engineer having experience of more than 3 years in multi storey building construction

i am structural civil engineer from algeria and i have 9 years experience in such field, i speak and write both french and english

I have been involved in Health, Safety and Environment in excess of 25 years and I am an experienced and qualified Health and Safety Professional in a Construction, Oil /Gas, Drilling Off-shore and On, Aviation and Petrochemical environment. This has enabled me to undertake the following:

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

i m working in huawei technologies pakistan from 26/9/06 as site engineer and 2 times promoted as quality control engineer and civil work manager

Design and development of civil and structural engineering projects. / Effective management of crews during field testing and inspections. Design and development of several mechanical engineering projects in an industrial chemical plant.

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

Electricial field 18 years, licensed journeyman since 1992, residential, commercial and industrial

Ñivil (irrigation engineer), dam design and construction engineer

Prepaired bq, proposal, monitor site

Electrical designer of lightin, power, and systems for commercial buildings

Civil Engineer

QA/QC, NDT INSPECTION, CONSTRUCTION QA/QC & CERTIFIED LEAD AUDITOR

Licensed Civil Engr with more than Ten (10) yrs of work experience mostly in railway projects, commercial and residential buildings in the Philippines. Includes Construction Supervision, Design, Estimates and Monitoring. Computer literate with knowledge in different Engg Softwares.

Ten years Experience @ various construction sites like LNG Terminal, Infrastructures, Marine/Offshore, Jetties, Break water, Port Commercial & Residential Building projects with skill in Site Management, Execution & QA/QC. Work experience with Saipem S.A, Ballast Nedam / Foster Wheeler, Besix-Kier

Estimator / Quantity Surveyor

OBJECTIVE: To obtain a rewarding and challenging position in a growing company which will utilize my Construction Estimating / Project Management skills and abilities.

16 years experience in construction Health, Safety and Environmental. OSHA 500 & 501, B-SAF (Behavioral Safety Audit Formula) developer. International experience. Active passport.

To secure a challenging senior middle level hierarchical position, as a professional Naval Architect, in a Modern Shipbuilding / Ship repair yard/ Oil, Gas or Offshore industry, worldwide, that offers both a challenge and a good opportunity for growth in career.

A results driven professional with 7+ years experience in electrical engineering, production support and leadership.

I have an experience of 10 years as a site and planning engineer from which 2 are overseas. It was obtained mainly in the construction industry. I am proficient in Primavera P3, Excel and Word and I have a good knowledge of AutoCad 2000i

I have got very good experience in electrical projects execution please get me a suitable job in USA/UK/OVERSEAS

Assistant Project Manager for Design/Build Company. Successful completion, on time and at budget for multi-residential projects. Company liaison for Owner and Clients. Responsible for research, analysis and response to insurance companies for plicy compliance

I am confident , professional heavy equipment operator , with over 15 years experience in a wide range of fields .

Almost 10 years of active experience in Coordinating Occupational Health, Safety and Environment activities

Mechanical Engineer with 16 years Exp in Oil&gas/Refinary & power Sector as Sr .Manager( Construction) with Triune Projects Pvt Ltd, New Delhi Key Skills: Construction Supervision & Management, Testing & commission, Maintenance Management, Inspection coordination , Field Engineering

Field Engineer, Instrument Specialist, Instrument Technician, Instrumentation and Controls, DCS, PLCs, Turbine Controls, Power Plants, Pipelines, Refinaries, Steel Mills

Eighteen years Electrical experience in the Offshore, Petrochemical, Power Generation, and Natural Gas Processing industries. Project Manager, Hook-Up & Commissioning, Supervisor of E & I Design staff and E & I contractors on projects. Budgeting and Procurement experience.

11+ years of experience in Procurement, Materials, Inspection & Expediting positions

Highly skilled carpenter 17 years experience. Related work includes structural steel erection, connecting and rigging. Poured concrete, scaffold set up and tear down, foreman for residential housing from framing to finish carpentry.

2 Years of Experience, Heavy Equipment Certified, CDL CLass A, OSHA 10HR/30HR, COnstruction Management Degree in progress

Cost/Budget Controls Manager

DRAUGHTSMAN/QUANTITY SURVEYOR with 5 years exp. 3 years in Burj Dubai Tower with Diploma in Civil Engineering

Journeyman Ironworker with exsperience in boilermaker, pipefitter work

Autocad draughtsman 19 years mainly civil/structural experience

Electronics security engineer

I am formerly a Sr. Maintenance Engineer responsible for the Maintenance and Project implementation of several Petro Chemical Plants. My responsibilities included supervising anywhere fro 10 to 200 mechanics at any on time. I was also resposible for budget up to 7million US.

Work as apipe fitter for 6 years.my last work location was in new calidonia,austria for bieng finish contract

In-depth knowledge of related course work and work experience in Civil Engineering Firm. Worked as Design Engineer in private consultancy firm from May’03 to June’04. Working as an Associate Design Officer with Patni Computer Systems since Feb’06 till date.

Having Eight Years Experience in the field of Civil Construction of Tank Farms, Roads, Control Buildings, Valve Stations, Pipe Racks, Pipe-way Sleepers, Paving, Sulphur Silos, Furnaces, Boilers, Conveyors, Flare Tower, Heavy Vessel Foundations in Power and Desalination Plant, Chemical Plant, Public

Mechanical Engineer,Having exp.in Ship Building 4yrs Exp in Tribon M3 and Autocad

Over 10 years of experience I have developed a good level of IT skills: I regularly use P3 (Primavera Project Planner), P5, P6 as well as Microsoft Office software.

I am self motivated person who is diligent, ambitious, adaptable, willing to learn and to take on new challenges.

Senior Pipe Stress Engineer

BE. MECH + CWI+BGAS PAINT. INSP. GR.2+ ISO 2000 lead auditor+ 10 const. & maint. in the field of oil & gas

Dear Sir: My experienced assignments cover a variety of projects including project management, translation and negotiating.

EXPERIENCE IN INTERNATIONAL TENDERING OF POWER TRANSMISSION PROJECTS

Summary of Relevant Experience: Management career is based on sixteen (16) years experience developed while in long term service with world class engineering and construction organizations.

OBJECTIVE To obtain a position with a progressive construction / development firm in which I will utilize my construction management and business skills

Prepared weekly and monthly schedules and cost reports preparation and submission to Client and in house management• Monitored of the cost & Progress on weekly basis. Invoiced to Client on monthly basis for the project.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out