Resume - I have more than 6Yrs Exp. with oil and gas field on piping work like Installati...

Misco Jobs

Resume #87486

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

Secure a challenging engineering position where in my attribute, experience, and communication skills can be utilized in obtaining personnel career goals and those of employer.

TECHNICAL QUALIFICATION:

Bachelor of Engineering in Mechanical (B.E)

University - Manonmaniam Sundaranar (1999-2003)

EMPLOYMENT HISTORY

Responsibilities:
„« Planning for the activities in advance arranging man power,
Machineries, tools & tackles and materials required.

„« Reading engineering drawings and procedures and explaining to subordinates for the smooth execution of the job with quality and safety.

„« Maintain daily activity records and Monitoring the daily progress.

„« Co ordination with Engineering and Procurement department for the updated engineering drawings and for the availability of the materials at site in time.

„« Managing man power and equipments as required for the job on time.
„« Co ordination with the client and consultant and handling subcontractors.

WORK EXPERIENCE: From 30th November 2006 to 19th July 2009

1 DODSAL ENGINEERING AND CONTRACTING - DOHA, QATAR

PROJECT: RAS LAFFAN COMMON COOLING SEAWATER SYSTEM PHASE- 2

PROJECT PROFILE:

Ras Laffan Common Cooling Seawater System Phase II project, is a development being undertaken by COMPANY for providing cooling water supply to Industries located in Ras Laffan city approximately 80 KM north of Doha, State of Qatar, Arabian Gulf.

The Scope of the CONTRACT is to carry out Engineering, Procurement, Installation, Construction, and Commissioning, start up and handover the common cooling water system for the once through consumers including Qatar Gas, Ras Gas, Qatar Power for Phase II project, Category -1.

COUSTMER: QATAR PETROLEUM (QP)

PIPE VENDOR: FUTURE PIPE INDESTRIES IN QATAR (GRP/GRE/GRV)

NAME OF THE POST: PIPING ENGINEER

Responsibilities:
„« Planning and monitoring the fabrication and erection with content of 25mm to 4000mm diameter pipes and spools in the material of GRE, GRV, GRP and steel. In function of electro chlorination line, Fire water line, Drain lines, Backwash filter line, Main cooling water line, Service air line, Instrument air line in above ground and under ground area, pipe racks, Chlorination plant and carry out the work with safety and successfully.
„« Ensure all project activities in their assigned area incompliance with project specification drawings and contract requirements.
„« Coordination with the client and contractor for execution of the project as per the contractor requirement.
„« Carry out all activities as per the planned schedule to achieve target dates.
„« Arrange all required manpower and resources in coordination construction manager.
„« Coordinate with engineering department in order to issue the drawings to meet project schedule and requirement.
„« Study of plot plan general arrangement, isometric and pipe instrument drawings.
„« Preparation of method of statement.
„« Organizing and utilizing the all man and machine to finish the work in the short periods.
„« Maintaining all the details, documents and progress detail.
„« Erecting the valves, rubber bellow joint, supports and specialized in manifold, valve pit and tie in construction.
„« Coordinate with safety department for compliance with safety, health and environmental procedures.

Station piping works:

PUMP HOUSE MANIFOLD, SUPPLY AND RETURN TIE INS AND RECEVING BASIN.

Responsibilities with QA/QC

„« Receipt inspection of incoming Material with FPI/QP as per Inspection Test Plan (ITP)

„« GRP/GRE/GRV Pipes and Fittings Inspection as per Approved Isometric Drawings and Shop floor drawings.

„« Organize and conduct 3rd party inspection.

„« Verification and witness of Raw material test and Physical test of all Pipes and fittings.

„« Raise the RFI for 100% joints inspection and maintain the record.

„« Raise RFI (Request for inspection) to QP and carry out receipt inspection clearance.

„« Coordinate with material controller and QA for supporting documents.

„« Check the all field lamination joints and make inspection reports.

„« Propose corrective action plan for Non-Conformances raised and follow with construction for the close out of NCR

„« Make the field inspection test plan,

„« Make the method statements of lamination joint, adhesive joint, key lock joint and coupler joint.

„« Make the As Built and Red line mark drawings according to the site condition for preparing final As-Built.

„« Ensure all inspection and requirements are fulfilled at relevant stages of construction in accordance with QC plan.
„« Control of Quality Documents and prepare test packs.

„« Make the hydro testing report for field hydro testing.

WORK EXPERIENCE: From 10th Oct 2005 to 15th November 2006

ƒæ GALFAR ENGINEERING AND CONTRACTING LLC, MUSCAT, OMAN

COMPANY PROFILE: An ISO 9001-2000 Company having seven units including oil & gas unit. In this unit having more than 6000 man power and well versed experience staff and workers. This unit undertaking contracts from Petroleum Development Oman (PDO) in all over Oman country. Company's specialty is always observing Health, Safety and Environment (HSE), Quality systems and Production.

ƒæ UNIT: OIL & GAS
Galfar Engineering & Contracting L.L.C. is an ISO-9001 Certified Mechanical Construction Company (Oil & Gas) in Muscat, Sultanate of Oman.

The Company under taken Project Design, Fabrication, Construction & Maintenance Services in the field of Oil & Gas, in various places of Middle East Countries. The company is one of the leading companies in sultanate of Oman.

Project works:

1) Project Title: Al - Huwaisah to Yibal ¡¥A¡¦ 18¡¨ GRE Pipe Line EPC Contract
„« Laying of 18¡¨ G.R.E pipeline for crude oil transportation 48 KM
Pipe Vendor: Composite Pipe Industries in Oman (CPI)

Customer: Petroleum Development Oman LLC
Name of Post: Piping Engineer (INSTALLATION)
2) Project Title: 14¡¦¡¦ GRP Pipe line From Mabrouk to Shihrawl (EPC Contract)

„« Laying of 14¡¨ G.R.E pipeline for crude oil transportation 45 KM
Pipe Vendor: Future Pipe Industries in Hollend (FPI)

Customer: Petroleum Development Oman LLC

Name of Post: Piping Engineer (INSTALLATION)

Responsibilities:

ƒnƒnƒn„« Ensure all Project activities in their assigned area in compliance with project specification, drawings, contract requirement & CQP.
„« Arrange required manpower and resources in coordination with the construction manager.
„« Carry out all activities as per the planned schedule to achieve target dates.
„« Study the Iso, P&ID,GA Drawings and Carry out the job as per approved drawings
„« Liaise with QC Inspector in understanding quality requirement and maintain pertinent quality record.
„« Ensure all inspection and requirements are fulfilled at relevant stages of construction in accordance with QC plan.

Client: Petroleum Development of Oman (PDO)

Position Held: Piping Engineer (Fabrication shop in charge in Oil & Gas Dept.)

Site: PDO -YIBAL,

On plot piping work: Fabrication & Erection of Station piping for Well pad hook up for oil line, Gas line, Water injection, ESP Well, Water supply line, and Gathering Station Piping work, Station Manifold Skid, Separator piping for inlet &outlet(48¡¨,42¡¨,56¡¨,36¡¨sizes) including Hydro test as PDO ERD Specification.

Off plot piping work: Fabrication & Erection of flow line piping work for crude oil line, Gas lift line, Water Injection line, Water Supply line.

Duplex Stainless Steel piping work: Fabrication & Erection of Station piping for water injection pump connections. Involved Fabrication and hydro testing done as per PDO ERD Specification.
(sizes up to 24¡¨)

ƒæ HSE Trainings: Below the all safety courses have been done successfully

1. HSE Induction Training Programs.
2. H2S Awareness Course.
3. STOP (Safety Training Observation Program) Training program.
4. Enhanced Site Supervision Workshop
5. Permit Applicant Course(PTW System)
6. First Aid Handout Course.

Previous Experience: From 6th June 2003 to Sep 2005

Industrial Experience:

Name of the post: PRODUCTION ENGINEER

Company profile: M/S Strategic Engineering (P) Ltd, is one of the leading Glass
Reinforcement plastic pipe & fittings manufacturing company in
India located at silvassa. Our concern is a one of the ISO-9002 &
API certified company

Responsibilities and exposures (production):

„« Production planning
„« 100% schedule adherence of production
„« Allocation of manpower
„« Raw material schedule production
„« Controlling the internal rejection
„« On-line finishing and in ward
„« Operator counseling
„« Improvement on product quality by introducing the product testing
„« Waste reduction
„« Product cycle time reduction
„« Quality Kaiser
„« Rework reduction

SITE EXPERIENCE:

Name of the post: Piping Engineer (INSTALLATION)

Name of the Company: Strategic Engineering (P) Ltd, Silvassa

Projects Handled:

1. Bharuch Eco - Aqua Infrastructure (p) Ltd, Ankleshwar,Gujarat.

„« Disposal Project, Effluent Onshore FRP(Fiber Reinforced Plastics) Pipe Line Project (44Km)

2. Silvassa Industries (RELIANCE), Silvassa.

„« FRP Pipe Line Project (3.5Km), Fire hydrant system - Silvassa

3. Silvassa Municipality Water Line, Silvassa.

„« FRP Pipe Line Project (2Km)

Responsibilities:

„« Review of isometric drawing
„« Handling of material consumption
„« Supervising the laying of pipes and joints
„« Preparation of associated reports
„« Labor issues

4. Shell LNG Receiving Terminal Project Hazira, Surat, Gujarat.

I have worked as a Project Engineer in a12.5 Km, various dia. GRE process piping both above and below ground for witch the pipes are supplied by future pipes Inc, holland

Responsibilities:

„« Study of GA drawing
„« Study of isometric drawing
„« Monitoring the laying and jointing works
„« Handling of material consumption
„« Support Erection
„« Valve Erection
„« Preparing associated reports
„« Labour issues

PERSONAL PROFILE:
Date of Birth: 21.07.1982
Gender: Male
Marital status: Single
Nationality: Indian
Languages Known: English, Tamil, Malayalam, Hindi

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 4812)

Go to Search Parameters...

Brief Description

Extensive background in Program/Project Management.

i am working as an electrical site engineer in ETA at dubai.I am working in dubai metro project.

3 years of professional experience (after Post Graduation) in Highway Engineering (Expressway, National Highway, Hill Roads etc.).

Proe , Autocad, Unigraphics (Modeling,Drafting,Assmbling)

Project Execution : HVAC / PLUMBING / FIRE FIGHTING

I have spent nearly four years as a Geotechnical Engineer and have gained an immense variety of knowledge from running numerous and varied site investigations, which has given me strong skills in writing interpretive ground investigation reports for foundation design and slope stability, supervising

Structural engineer with 4 years experience and Master of Science in Construction management.

I am an architect and urban designer practicing in the Middle East for over thirteen years. I have held design and project management responsibilities at senior positions with international British consultants and Government organizations wherein I handled wide range of building types such as commer

Over ten years of experiences in various sectors of the residential and commercial building industry.

Civel engineer ,with a experience of 8 year in highway construction

Proficient in Microstation,Autocad,Photoshop,and Corel Draw.Knowledgeable in HVAC plans, architectural plans, structural plans.Proficient in English.Time Management, Teamwork, Team Building and Management, Motivation.

Position as Safety Supervisor to achieve ZERO ACCIDENT goal of the company to serve,I have a total of 22 years of work experience 15 years in Indian Navy and 07 years in Oil, Gas, Petrochemicals and Construction field in Gulf and India.

Cost Engineer for 11 years. Has adequate experience in a multitask discipline as planning, project management and supervision, quantity survey. Proficient in SAP and microsoft software applications. Team player, diligent and hard working.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

Masters degree in Highway/Structural engineering, 14 years of professional experience - working in the department of roads, good skills in CAD application (eg. SAP2000) and other computer applications (eg. spreadsheets)

Presently I am working in Saudi Arabia. I have nearly 17 years experience. From 1996 November I am using Microstation. I can work in Microstation & AutoCAD. I have experience in AutoCAD 2006 from my personal PC. Mainly I am working in architectural discipline. I can do structural & civil work also.

Mechanical Engineer having 14 years of experience in the field of construction in Refinery, Petrochemicals & Power plant mainly focussing on Piping, Reformers & Heaters. Has been worked with major international companies like TEchnip, Technip KTI etc.

Dear Hiring Manager

Btech MBA with 3 yr exp -business analyst

27 year veteran contracts manager , civils and epc specialist

cv for civil foreman

Lead Document Controller, strong interpersonal skills, highly motivated, able to work in multinational companies

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

B. Sc. in Civil Engineering, 6 years in ERicsson & Nokia, Construction, QA, Documentation, Telecom power management

Fully equipped Mechanical Engineer doing Quantity Surveying

I have more than 6Yrs Exp. with oil and gas field on piping work like Installation,Spool fabrication,Hydro testing,Red line and Asbuilt making,Pumb house,Tie-in area, Receving basin area,etc..work in Abroad and India,

A proactive, versatile and committed Executive Manager with extensive experience spanning throughout the world and accustomed to project and people management, coordinating resources effectively to achieve targets often within stringent deadlines. A skilled problem-solver

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

Responsible for Receiving, Storing, Issuing, Stock Inventory for all types of Materials for M/s TECHNIP, BECHTEL, GASCO, NPCC (Piping, Instrument, Electrical, Structural steel, Equipments etc. Maintaining uptodate stock Records updating stock

Auto Electrician, Auto Mechanic, Heavy Equipment Mechanic

Document Controller

Over 14 years working experience 3 years experience in design office and 11 years experience in the construction and supervision of major prestigious international projects .

An engineering position in the emphasis of tool design, opto-mechanics, manufacturing, liaison, stress analysis, aircraft interiors or structures.

13+ years geological/geotechnical/GIS international hands-on experience in the construction & energy industries. MSc/BSc/PgD in the geosciences. Excellent software skills. Contractual or permanent post sought. Available now.

I have extensive hands on experience of more than Eight years, including Six years in the Middle East, in the field of Mechanical Engineering for Building Services, working with reputed Engineering and Consulting Services houses in KSA and UAE.

Site Engineering, Autocad & Estimate

Inasmuch as the position would requires strong degree of integrity, plus high level of motivation and assertiveness, I shall be very glad to be a part of your company.

Safety Manager

Quality control inspector

•Experienced Mechanical Engineer with over 8 years experience in HVAC Engineering.

17 years in the field of construction, Experience Architectural Works and Interior works in the construction of the following building such as: Five Star Hotel, Convention Center<Condominuim, High rise Offices, Commercial and residential ,Civil Defense Mass Rapid Transit and chemical Plant.

•Strong knowledge of engineering design principals and methods necessary to adequately dimension and detail complete design concepts. •A thorough knowledge of mechanical, pneumatic, hydraulic components and electrical systems. •Experience with Classification Society Rules and Regulations.

I am seeking a responsible position that is both challenging and an opportunity to share in the rewards of successful performance in an area where creativity and business experience will be of an immediate value to the organization. I have 25 years of electrical experience

Cost Engineer/Estimator with supervisory experience. Responsible for budgeting, estimating, budget coordination and total cost management. Identified systems and procedure that are necessary to ensure that the engineering, procurement, construction and start-up phases are properly planned.

ENGINEERING MANAGER / CIVIL ENGINEER Specialized in Tunneling utilizing EPBMs and SEM / NATM. Holding a Masters Degree in Civil Engineering with 8 years experience in working overseas for leading Construction Contractors, 6 years in tunnelling.

Civil Engineer / MBA with 14 years of international construction project management experience.

Dear Sir / Madam, I’m interested a job opportunity with your organization which would require my skills & qualifications. I have 24 years experience Oil/gas & Power Industry, Construction Management/Supervision & QA/QC, Domestic & Overseas.

I am 37 Y rold, have 17yrsp.,after pass Dip. in Mech.engg., and 9yrs exp., after pass Dip. in Industrial safety from reputed institute in India, in Intl. standard Companies like CCIC-Qatar& Kuwait, L&T ECC-India, UB Engg ltd-India& Kuwait, Enelpower s.p.a.-Qatar.My Exp.

Project Engineer To be a member of a company that designs and builds large offshore and multi-purpose projects. Interests: Hydraulic Structures and Pipelines – Project Execution and Construction Management.

Remote Site Expert : Global Experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out