Resume - Instrument Engineer

Misco Jobs

Resume #87560

CONTACT INFORMATION:
View contact information...

OBJECTIVE
My career objective is to implement my skills and abilities as an Instrument Engineer constructively, in a progressive organization, and to prove myself dedicated, motivated and energetic

Personal Data
Date of birth: 06-06-1985
Sex: Male
Nationality: Indian
Religion: Christian, RC
Marital Status: Single
Languages: Malayalam,
English, Hindi,Tamil

EDUCATION

„« Class X (All India Secondary School Examination)
„« Class XII (All India Senior School Certificate Examination)
„« B.Tech Electronics & Instrumentation Engineering (Cochin University of Science and Technology)

TECHNICAL EXPERTISE

Operating System: MS-DOS,WINDOWS
Language: C, C++
Applications: MS OFFICE, PRIMAVERA

PERSONAL SKILLS
„« Motivated and dedicated to the given task.
„« Excellent Leadership quality.
„« Good Presentation skills.
„« Team player, good listener.
„« High degree of adaptability.

PROFESSIONAL SUMMARY:

„Ï I have experience in construction and commissioning of both Process units and Utility sections of OIL/GAS project.
„Ï Accrued specialized experience in Instrument calibration, loopchecking, and function check of OIL/GAS projects.
„Ï Well exposure to instruments of different company like GE, Fisher, Yokogawa, Milton Roy, kubler, Biffy, Rosemount, etc.
„Ï Gained experience on vender skids like Macchi, Viola, Airproducts, GE, entropy etc.
„Ï Gathered information on how to interpret study and explain P&ID, ILD and other plant drawings.
„Ï Have good Knowledge in system side, both control systems and Trip systems.
„Ï Very Good knowledge and experience on Foxboro DCS and Foxboro Tristation. (FOXBORO Series, Version No; 9) and SCADA system.
„Ï Have well knowledge on control logic understanding and analyzing, can easily understand the cause and effect diagrams and logics.
„Ï Have a thorough knowledge of instrumentation basics, various instrument controller logics and also about various communication protocols like HART, Field Bus etc.
„Ï Have good experience on Bentley Nevada 3500 and TIM systems (MMS), field side and system side, and know how to read the system plots.
„Ï Have experience in BMS (Boiler Management System) System and BMS control logics.
„Ï Have good knowledge about Fire and Gas instrument installation calibration and monitoring. Have exposure to GDT and GDF of different models.
„Ï Have good knowledge about IAMS system (Alarm Monitoring System).
„Ï Supervisory experience in Tie-in and Shutdown jobs.
ACHIEVEMENTS AND TRAININGS

„« Elected and served as the President of Electronics & instrumentation
Association (TECHCEK) during college period.
„« Got SAFE WORK CERTIFICATE from RasGas safety Dept, For safe work coordination in site
„« Holder of RASGAS PTW (Permit To Work) certificate for signing hot and cold work permits (rasslaffan industrial city Qatar)
„« Holder of CTJV PTW(Permit To Work) certificate for signing hot and cold work permits (rasslaffan industrial city Qatar)

„« I was selected as Bsafe observe and attended the Bsafe training.
„« Has undergone the following trainings o Safety induction and H2S/B.A familiarization course.
o Heat stress and confined space training.
o Graduate Under development (GUD) training. (One week special safety training)
o Basic Instrumentation orientation course.
o AGI Training (Acid Gas Injection)

EDUCATIONAL DETAILS

Course/Degree
School/College
Board/
University Year of passing Percentage of marks
B.Tech.
(Electronics & instrumentation) College of Engineering kidangoor Cochin university
Of Science&technology June
2007 70.40
H.S
(Class XII) B M M English Medium School,Kottayam Central Board of Secondary Education(CBSE) March
2003 67.2
S S L C
(Class X) B M M English Medium School,Kottayam Central Board of Secondary Education(CBSE) March
2001 80.80

ACADEMIC PROJECT
Main Project:
Title:
Description: BLENDING CHEST CONTROL USING DIGITAL CONTROLLER
Major project was done at the Hindustan Newsprint Limited (HNL), Vellor, kottayam. Different verities of pulp for the preparation of paper are mixed at fixed proportions in the BLENDING CHEST The project work was to control the pulp level in the BLENDINGCHEST by using a digital controller (MOORE Controller). A set of five controllers, one PID and four RATIO controllers, connected in cascade form the heart of the project.

PROFESSIONAL SUMMARY:

INDUSTRIAL EXPERIENCE

Currently working as calibration and loopchecking incharge of utility area for RasGas train6/7 project. Rgx6/7 or the RasGas train6/7 is one of the world's biggest capacity LNG producing train having a capacity of 7.8 MTA for each train. My scope in this project was, first to conduct the calibration of vender skid instruments in utility area and later to perform loop checking and pre commissioning activity for the same utility area.
The utility area comprised of GTG (Gas Turbine Generators), Steam and condensate system including Boilers and HRSG, Fuel gas system, Fresh water system, Instrument air compressor and Nitrogen make up area.

Responsibility:
o Raise work permits for calibration and loop checking activity.
o Ensure all the calibration and loop checking activates are undertaken as per the level of quality and HSE standard.
o Conduct and coordinate calibration and loopchecking of all type of Temperature, Pressure, Flow, Level and Analyzer transmitters and Gages, and also for control valve and ON/OF valves o Conduct spec check of PRV, orifice, thermowell, etc.
o Study and explain P&ID and ILD for enabling smooth work progress o Provided support for SAT test of control panels and function test of control philosophy.
o Conducted calibration and loop checking of all transmitters, valves, fire detectors and burner elements for four Macchi boilers o Make the execution of calibration, loop checking and pre-commissioning/commissioning activities with due consideration for safety, technical, quality, cost and achieving smooth hand over to the operating company.
o To coordinate with plant group and assist to troubleshoot and start up.

Hi-Tech Engineering is a contracting company doing the maintenance work in

Hindustan Newsprint Limited (HNL). HNL is a public sector undertaking under the administrative jurisdiction of the department of heavy industries, Government of India. Raw material is made to pulp and Different verities of pulp for the preparation of paper are mixed at fixed proportions in the BLENDING CHEST and made to paper.
During this training period we were allowed to conduct a detailed study on different plants of HNL. In this detailed plant study the various controlling mechanisms employed in the plant and there working was also included
My scope in this project was as following, o Co-ordinate the maintenance activity in the running plant.
o Plan and coordinate safe working conditions as per the safety conditions during the shutdown period.
o Process variable measuring instruments installation, wiring and impulse line making calibration and maintenance.
o Understanding control valve characteristics, configuration and overhauling.

„« Instrumentation Engineer

„« Site Engineer

„« Instrumentation Design Engineer

„« Procurement Engineer

REFERENCE
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2651 to 2700 of 4813)

Go to Search Parameters...

Brief Description

Electrician and Electronics Technician, with military and civilian experience

Experienced construction project manager with a finance and business management background.

Over 15 Years of rich experience in Engineering Procurement & Construction projects for Oil , Gas , Petrochemical , Power Plant & Ports .

Contact Details Personal Profile Professional Profile Academic Qualifications Non-Academic Details Computer Abilities Work History Detailed Working Experience.

Mechanical project engineer with 3 year experance

Document Controller, 3 years Experience with Professional Degree

COATING INSPECTOR CV

Instrument Supervisor

Over 20 yrs of exp in upstream O&G. 7yrs offshore, from construction of offshore platforms, hook up and commissioning through to start up and steady state production. Strong HSE focus (previous role in charge of offshore platform), strong hardware completion and handover exp. LNG experience.

Instrument Engineer

AutoCAD/ Microstation Drafter

CAD CAM PLM TECHNICAL SUPPORT

I am Electrical Diploma holder. I have 10 Years of professional experience in Drafting in Building Service like Electrical, Fire Detecting, And Public Address System. Also Familiar with Indian standards as well as international codes such as BS, NEC, IEE Regulations & NFPA for Building Services.

An enthusiastic HSE Advisor with a background in the Oil & Gas and Major Construction Industry.

Significant experience gained in the welding and fabrication industry. Working Petro chemical plants, oil and gas, pipeline & fabrication yards in Middle East (Kingdom of Saudi Arabia) and India. Welding Inspector (3 Years and 6 months), taking full responsibility for production welds made on site.

Ten years experience in all areas of camp operations management. Expertise in the following areas: Housing Food Service Maintenance Contractor Compliance Operations Security Experienced in civilian construction, oil & gas and military base support contracts.

- Civil Engineer with 4 years construction management experience. - Looking for project management or structural/civil engineering position. - Willing to relocate. - Hard working, devoted employee with leadership skills. Looking to increase experience & exposure in the industry.

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

I HAVE BEEN INVOLVED WITH EQUIPMENT MAINTAINENCE ALL OF MY LIFE,AG/CONST BACKROUND 10 YEARS HEAVY EQUIPMENT EXPIERENCE 6 AS A FIELD TECH. LOOKING FOR AN OVERSEAS OPP.

Over nine years experience in the Measurement and Control Field. Overseas experience in China. Experienced in construction, commissioning and field engineering, mainly in the pharmaceutical, semiconductor, film manufacturing and food & beverage industries.

OBJECTIVE To obtain a Full Time Position as a Project Manager, Construction Project Manager, Site Manager, or Site Superintendent in the Wireless Industry.

Respected sir, this is an reference I read it in google.com. Sir, this is to just let know about the vacancy details in your esteemed organisation as I am a BE(Mechanical).

Have 4 years of experience in design and construction of Highways, Pre-Stressed concrete bridges and residential and industrial buildings.

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

Completed 1st Year MBA from SV University, Tirupati (Distance Mode) Pursuing 2nd Year MBA-HR.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Where my experience, Education,training and good work habits will be an asset to your company.

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

Plant Inspector or Quality Assurance/Control Inspector API 510/ AWS CWI

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

Senior piping designer

Twenty plus years managing large scale telecom and construction projects

Construction managemnt, contract managment, quantity surveying, planning, schduling, cost analysis and control, finance managment, resource managment, computer maintinance,

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

A suitable position in the area of electrical schematic drawings and designing of electrical panel boards, cable layouts, etc. and/or designing of electronic circuit layout and PCB by using CAD software .

Mechanical Engineer

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

I know I could be a good asset to your company. I have 9 years of experience working in commercial, industrial. I have skills in various fields such as electronics, PLC work, carpentry, masonary, concrete work, mechanics, welding, and fabrication.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Experice engineer with project engineering and project managemnt

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

Electrician who posseses a wide variety of electrical knowledge

19 years of International Project Management experience, excellent communication skills at all levels. Highly organized dedicated and reliable employee, thrives under pressure. Very good computer skills, user of Microsoft Office and various accounting software SAGE, JDE, Tally & Enterprise

Work in construction warehouse , Construction on construction site , Forklift and other heawy machine operator , Supervising of building site , Control and checking construction material ( strickt and sawing construction material spendind ) etc.

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

First Prev 51 52 53 [ 54 ] 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out