Resume - Professional Surveyor & Mapper, Thirty years experience. Construction Layout, Qu...

Misco Jobs

Resume #87683

CONTACT INFORMATION:
View contact information...

OBJECTIVE

Having been involved in the construction industry for the past (27) twenty-seven years I have been personally responsible for the successful construction and completion of thousands of construction projects, both private and public. My experience has given me the opportunity to perform construction staking on projects to include: Orlando Event Center (New Amway Arena) in Orlando Florida, Norfolk/Portsmouth Tunnel in Portsmouth Virginia. I have worked on classified sites within the Norfolk and Portsmouth Navel Shipyards in Virginia and was even sent to Guantanamo Bay in Cuba, Tampa General Hospital Expansion Project, Museum of Science and Industry (Challenger Building) in Tampa, Florida, State Road 56 Bridge Construction in Pasco County, Florida. Over (30,000) thirty thousand residential and multi-family subdivision lots throughout (8) eight surrounding counties. Performed thousands of miles of Route Surveys as well as coordinated thousands of miles of utility staking. Performed (220) two hundred and twenty square mile drainage study for Pasco County Florida from the Anclote River connection to the Gulf of Mexico (36) thirty-six miles inland to the Cypress Creek Well field. Performed construction staking for the Busch Gardens in Williamsburg Virginia and Kings Mill Subdivision, which adjoins the attraction. Constructed golf courses within Pasco, Hillsborough and Hernando Counties to include: Lake Bernadette – Zephyrhills, Florida, Links at Beacon Woods – Hudson, Florida, Tall Pines at River Ridge (2) Courses – River Ridge, Florida, Summertree – Hudson, Florida, Seven Springs (3) Golf Courses – Seven Springs, Florida, Crescent Oaks Golf Course – Tarpon, Florida, Magnolia Valley Golf Course – New Port Richey, Florida, Timber Pines (3) Golf Courses – Spring Hill, Florida, Seville North Golf Course – Hernando County, Florida, Lake Jovita – Saint Leo, Florida. A few of the subdivisions I have managed include: Timber Pines for U.S. Home in Hernando County, Florida, River Ridge for multiple clients including U.S. Home in River Ridge, Florida, Ivy Lake Estates for Taylor Development in Lutz, Florida, Tampa Palms for multiple developers in Tampa, Florida, Seven Springs Golf and Country Club for U.S. Steel in Seven Springs, Florida, Beacon Woods and Beacon Woods North for Beacon Homes, Orchid Lake for Minierri Communities. Each project was unique in its own way, having its own challenges. However, nothing too big that it could not be conquered or too small that it did not need unique attention. There is basically a tremendous amount of construction of which I have been in direct responsible charge. All of which required attention to detail as well as coordinate and scheduling with multiple entities simultaneously. However, rather than perform the physical calculations and staking and as-built, I am looking to be the superintendent overseeing the constructing and protecting the developer and perform the necessary quality control checks to complete a class project.

WORK EXPERIENCE

Dates Attended: 10/2008 through 9/2009
Company Name: Capform, Constructors, Inc.
Position/Title: Chief Layout Engineer (Orlando Event Center – New Amway Arena) Orlando Florida.

Primary Responsibilities:

Review structural plans for layout crews on the Orlando Event Center in Orlando Florida which entailed design review and information as to the construction thereof. Calculate line and grade for the layout crews of all; beams, girders, columns, slab edges, stairways, escalators, elevator shafts, mechanical block outs, raker beams, anchor bolts etc.

Prepared all structural as-built drawing for the general contractor (Hunt Construction) related to all items listed above. Prepare unique as-builts on an as-needed basis and/or request from the general contractor. Maintain on site construction plans and record books of the RFI (request for information) as it pertained to said construction plans. Maintain coordinate geometry files for the four layout crews, prepare pre and post deck as-builts for slab pours, monitor and elevate the finish crews for all slabs. Provide both horizontal and vertical geometry for the embed layout. Prepare request for information requests to the general contractor. Monitor construction of all above items to insure that latest revisions were being constructed.

Further I was the responsible engineer for the following levels daily; Founder Level, Terrace Level, Press Level, Hospitality/Mechanical Level and Catwalk Level.

This was a monumental task as the plan revisions went from CCD#6 to CCD#18 in (7) seven months. Therefore there were (12) twelve sets of plans to review for modifications as this structure was being built, maintain the geometry and prepare the calculations for the layout crews and deck foremen as well as maintain the construction schedule.

Dates Attended: 11/2002 through 4/2007
Company Name: Glenn Price - Surveying & Mapping, Inc.
Position/Title: President/C.E.O.

Primary Responsibilities:

Managed entire surveying and mapping company, which consisted of twenty-seven employees. Prepared bids and contracts, marketing, invoicing, collections. Contract negation, submittal and certifications for Small Business Administration HUBZone certification, submittals and obtain Small Business status with City of Tampa, South Florida Water Management District and Southwest Florida Water Management District. Further obtained contract status with multiple city, county, state and federal agencies.

Dates Attended: 3/1992 through 11/2002
Company Name: D.C. Johnson & Associates, Inc.
Position/Title: Senior Vice-President

Primary Responsibilities:

Managed between (3) three and (5) five survey crews and (3) to (5) five CAD technicians on multiple construction projects over a five county radius for over ten years. This involved the calculations for construction staking and layout consisting of the review and comprehension of construction plans, coordinating with multiple construction companies and meeting their staking requirements and deadlines. Further responsibilities were meeting with owners, builders, engineers and utility companies to obtain their requirements during the course of the construction project. Attendance of pre construction and weekly construction meetings and prepare weekly status reports. Prepare As-built surveys and maps for local and state agencies for conformance to construction criteria and approval. Prepare bid estimates and contracts. Prepare quantity takeoffs from construction plans. Prepare record plats for residential and multi-family development. Prepared calculations, coordination and scheduling for shopping center and professional office complexes. Reviewed timesheets, prepared invoicing and tracked project budgets. Prepared change orders and request for information (RFI) from contractors.

Dates Attended: 4/1988 through 2/1992
Company Name: King Engineering & Associates, Inc.
Position/Title: Survey Manager

Primary Responsibilities:

Managed up to (6) six survey crews and (5) five CAD technicians on multiple construction and design projects for a branch office of a multi-disciplined engineering, planning, landscape architectural and surveying firm. My responsibilities were not limited to, but included review of the daily operations of the survey department. The annual budget during my four years was over 2.3 million in survey and drafting budgets. Prepared weekly project status and workload projections. Prepared invoices, contract and bid proposals. Performed calculations for construction staking, plan review and quality control review. Prepared and reviewed CAD drawings, base maps for engineering and design department. Prepared legal descriptions for land transfer and/or utility companies. Review title commitment and prepared survey reports for land transactions.

Dates Attended: 4/1986 through 4/1988
Company Name: Post, Buckley, Schuh & Jernigan, Inc.
Position/Title: Office Manager

Primary Responsibilities:

Managed up to (3) three field crews and (3) three drafters on multiple construction and design projects for branch office of national engineering firm. Prepared calculations and review fieldwork for crews. Prepared weekly workload projections and coordinated with other branch offices within the state to balance workloads for efficiency and scheduling. Prepared site plans for building permit department. Reviewed company timecards and prepared project invoicing.

Dates Attended: 4/1982 through 4/1986
Company Name: Casson Engineering
Position/Title: Senior Crew Chief

Primary Responsibilities:

Responsible for field calculations and fieldwork on multiple construction projects for both public and private sectors. Coordinate with project foreman and site superintendents for site scheduling and staking requirements. Prepare daily timesheets and prepare weekly workload projections for office manager. Train new employees in the art of land surveying. Perform field calculations from construction plans as provided which included the generation of field adjustments and plan interpretations.

Dates Attended: 3/1980 through 4/1982
Company Name: Enterprise Building Corporation
Position/Title: Layout Engineer

Primary Responsibilities:

Performed construction layout for the Tampa General Hospital Main Hospital Expansion in Tampa Florida. Project scope and responsible for horizontal and vertical alignment of over (3000) three thousand pilings and caissons for the construction of; Main Addition (12 stories and 1917 pilings), Rehabilitation Center (five stories and 480 pilings), Parking Garage (five stories and 188 caissons), Energy Center (five stories and 493 pilings), Radiology and Oncology Center (two stories and 83 pilings). This project was responsible for the largest single piece of steel ever laid in the State of Florida at the time, and was the Radiology Vault walls. Further responsibilities were for the coordination of over (400) four hundred carpenters and performing their site layout requirements which consisted of establishing pile cap horizontal and vertical positioning, horizontal and vertical positioning of grade beams, shear walls, columns, slabs, block outs, stairwells and elevator shafts. Further, establish breezeway connections for adjoining buildings as well as match floor-by-floor connections for the Main Building Addition. Responsible for the concrete slab crew and manage wet screed process for each deck/slab pour. Coordinate with Project Superintendents and Project Architects for change orders and modifications during construction. Review plans and coordinate with both carpenter and laborer foremen on a daily basis. Maintain horizontal and vertical control network for entire project on as-needed basis.

EDUCATION

Institution: State of Florida
Degree: Registered Land Surveyor
Completion Date: 2/1/1991
Description: Licensed Professional Land Surveyor

Institution: United States Army
Degree: Geodetic Surveyor
Completion Date: 4/1/1980
Description: Certified Geodetic Surveyor 82Delta, United States Army Defense Mapping School, Fort Belvoir, Virginia.

Certifications Date Received: 2/1/2001
Company Name: State of Florida
Title: Registered Land Surveyor

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 4806)

Go to Search Parameters...

Brief Description

I have been employed in the field of Power Engineering, Industrial Installations, Cement Industry and Sewage Treatment Plants at all stages, covering turnkey projects: erection, starting - up, commissioning, running and all kinds of maintenance.

A highly skilled industrial project construction & facility equipment installation management professional who has worked on projects from "cradle to grave" for various major companies. Over 15 years project management experience.

Twenty five years domestic and international experience in Prime Contracts and Subcontracts Management & Administration and Pricing involving all aspects of the procurement cycle.

Senior Engineer / Traffic Management I am confident that my experience would allow me to make an immediate and significant contribution. I am attaching a brief overview of my work history and accomplishments for your review.

Instrument supervisor

Seeking assignments in Civil Engineering with an organisation of high repute Developer/Project Management / Consultant / Contracts Professional in the Senior Positions of Projects Control Engineering / Commercial & Contracts Engineering / Cost Engineering / Quantity Surveying sections.

Buying, Procurement, Purhase, Logistics, Supply Chain, Material Control and Management, Stock and Inventory Control, Vendor-Supplier Relations, Client Relations

12 years expirience in my career as a Engineering CADD Draughtsman

Autocad, microstation,

Engineer civil site

SENIOR ELECTRICAL DESIGN ENGINEER - BUILDING SERVICES

Diploma in Mechanical Engg. Having 19/20 years of experience in FABRICATION AND PLANNING of structural steel, Pressure vessels, Boiler, as per ASME code and storage tanks etc. Last 15 years Iam working in Dubai in various organisation in verious responsible positions.

I am Bachelor of mechanical engineer having extensive oversease experience in the field of Oil and Gas Costruction.

15 years experience in the construction industry.Professional Engineer from Ghana and MBA from the University of Houston. Plan to be certified in the US as soon as possible.

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

I have been in the excavation industry for over 30 years having owned my own Excavation company for 16 of those years. I can operate a variety of equipment as seen on my resume

i can manage site maintanace,fabrication and erraction

scaffolding supervisor / co-ordinator /instructor

PCS Manager - Cost and Planner Engineer

I am civil engineer having 12 years experience.i have passed post graduate diploma in this field.

Experience in General Administration / Human Resource Management •Document Management / EDMS on Construction Project Management and Integrated Facility Management. •Experience in Contract and Cost Administration / Property Management •Includes diverse supervisory skills in planning and organiz

Facilities management, HR Management, Administration,- Mechanical Engineer, NEBOSH

Safety Professional for Construction, Railroad or Mining

Computer literate and exposed in construction scope of work ranging from medium to large-scale project for 13 years experience as a Quantity Surveyor dealing with all general QS duties both pre-contract and post-contract major in civil engineering, infrastructure and building works.

I am a BE(Electrical) Engineer having more than 12½ years of comprehensive experience (6+ years in Gulf) in Consultancy (Design) and Project Implementation involving Designing of Electrical Services, Tendering, BOQ , Estimates, Technical Specifications and in Installation, Testing and Commissioni

Welding Supervisor

Over 25 years experience in automotive, heavy equipment, and tractor / trailer repair, maintenance, and rebuilds. Repair, maintenance, and diagnostics on all types of heavy equipment / tractor trailer in shop and field service. Rebuild on all types of engines to include Caterpillar, Cummins / Detro

I am a multi skilled and highly proactive manager, with strong people management skills which have been developed in highly competitive and constantly changing environments, I have worked in the industry for some 17 years, both in house and also in the service providers roles.

Professional Surveyor & Mapper, Thirty years experience. Construction Layout, Quanity Surveys, As-built Surveys.

Asphalt foreman and paver operator

Over 20 years as an industrial electrician

Project Management Lead Zinc Copper Nickel Gold Silver Base Metals

Experienced CSA Designer

Project Management in HVAC Mechanical or Building Construction Management. Excellent mechanical aptitude, problem solving, customer relations, contract administration , field experienced hands on Manager

Unlimmited able seaman.,qmed oiler,SD(FH)LBMAN-NON LB EQUIP'D,Master 200 ton GT

Project planner / scheduler / cost / shutdown / turnaround /Primavera P6.2, P6.1, P6,/Oil, Gas, power, EPCM Project Control

I have experienced for road/bridge construction project as Site Enginer

Warehouse Inventory; Civil Engineering Technician;

Looking for an engineering position with the responsibility of structure research and analysis.

Career objective: seeking a challenging managerial position with an established regional or national organization.

Multi-Million Dollar General Construction Project Manager

Experienced Construction Superintendent

12 years experienced of AutoCAD 2D & 3D in Building Services (HVAC,Fire Protection, Water & Drainage)

I have worked many years in the construction field and I have knowledge of all aspects from ground breaking to completion.

Property Management and Building Maintenance

Ninteen years of diverse, multi-disciplinary experience in contract management, project planning, project budgeting and cost control related to industrial, construction and manufacturing.

My job objective is to obtain a career in Civil Engineering that could effectively utilize my skills in the field of construction management/supervision of civil construction projects with the following Synopsis

commercial, contracts and procuremnent management

Computer literate on microsoftword/excel, auto cadd,sincrere to work,honest,hardworking.

Inspector Coatings QA/QC, NACE Level II Certified, SSPC Bridge Inspection Certified.

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out